Soil biological properties under different tree based traditional agroforestry systems in a semi-arid region of Rajasthan,India

An investigation was carried out in an Entisol at farmers’ field in Jaipur district, Rajasthan, India during 2002–2004 to evaluate the effect of traditionally grown trees on soil biological characteristics. Traditionally grown trees in farm lands for study consisted of Prosopis cineraria (L.), Dalbergia sissoo (Roxb.) ex DC, Acacia leucophloea (Roxb.) and Acacia nilotica (L.) Del. having a canopy diameter of 8 m. Results revealed significant and substantial improvement in soil biological activity in terms of microbial biomass C, N and P, dehydrogenase and alkaline phosphatase activity under different tree based agroforestry systems as compared to a no tree control (cropping alone). Soil microbial biomass C, N and P under agroforestry varied between 262–320, 32.1–42.4 and 11.6–15.6 μg g⁻¹ soil, respectively, with corresponding microbial biomass C, N and P of 186, 23.2 and 8.4 μg g⁻¹ soil under a no tree control. Fluxes of C, N and P through microbial biomass were also significantly higher in P. cineraria based land use system followed by D. sissoo, A. leucophloea and Acacia nilotica in comparison to a no tree control. Thus, it is concluded that agroforestry system at farmers’ field enhance soil biological activity and amongst trees, P. cineraria based system brought maximum and significant improvement in soil biological activity.     

Anisotropy of wood vibrational properties: dependence on grain angle and review of literature data

The anisotropy of vibrational properties influences the acoustic behaviour of wooden pieces and their dependence on grain angle (GA). As most pieces of wood include some GA, either for technological reasons or due to grain deviations inside trunks, predicting its repercussions would be useful. This paper aims at evaluating the variability in the anisotropy of wood vibrational properties and analysing resulting trends as a function of orientation. GA dependence is described by a model based on transformation formulas applied to complex compliances, and literature data on anisotropic vibrational properties are reviewed. Ranges of variability, as well as representative sets of viscoelastic anisotropic parameters, are defined for mean hardwoods and softwoods and for contrasted wood types. GA-dependence calculations are in close agreement with published experimental results and allow comparing the sensitivity of different woods to GA. Calculated trends in damping coefficient (tanδ) and in specific modulus of elasticity (E′/ρ) allow reconstructing the general tanδ-E′/ρ statistical relationships previously reported. Trends for woods with different mechanical parameters merge into a single curve if anisotropic ratios (both elastic and of damping) are correlated between them, and with axial properties, as is indicated by the collected data. On the other hand, varying damping coefficient independently results in parallel curves, which coincide with observations on chemically modified woods, either “artificially”, or by natural extractives.     

Characteristic fragment ions from lignin and polysaccharides in ToF–SIMS

Different model compounds for lignin, hemicelluloses and pectins were studied by time-of-flight secondary-ion mass spectrometry (ToF–SIMS). Mass spectra of Klason lignin from normal and compression spruce wood, aspen wood and wheat straw were compared. Spectra of brominated spruce and aspen wood sections showed fragment ions attributed to brominated guaiacyl and syringyl units in lignin at m/z 215, 217, 229 and 231, and m/z 245, 247, 249 and 261, respectively. Spectra of mono-, oligo- and polysaccharides showed fragment ions at m/z 127 and 145 characteristic for hexose units, and ions at m/z 115 and 133 characteristic for pentose units. The same ions were detected in spectra of delignified spruce and aspen wood sections. Labelling of anionic groups by Sr²⁺ ions followed by ToF–SIMS analysis showed that pectins were present at specific locations on the surfaces of spruce and aspen wood sections still after delignification with hydrogen peroxide in acetic acid.     

Study on the effect of nano-silver impregnation on mechanical properties of heat-treated <Emphasis Type="Italic">Populus nigra</Emphasis>

The present study is aimed at investigating the effect of heat treatment of nano-silver-impregnated Populus nigra on weight loss, modulus of rupture (MOR), modulus of elasticity (MOE), and compression parallel to grain. Specimens were impregnated with 200 PPM water-based solution of nano-silver particles at 2.5 bar in a pressure vessel. For heat treatment, both nano-silver-impregnated and simple specimens were kept for 24 h at 45°C and then further for 24 h at 145°C and finally for 4 h at 185°C. MOR decreased from 529 to 461 kg/cm² in heat-treated specimens; MOE and compression parallel to grain were though improved. Also, comparison between heat-treated and nano-silver-impregnated heat-treated specimens showed that there was a decrease in MOR and MOE in nano-silver-impregnated heat-treated specimens. This shows that nano-silver impregnation facilitates transfer of heat in wood and it may increase the process of degradation and pyrolysis of wood structures in deeper parts of specimens.     

Comparative analysis of a wood: adhesive bondline

The wood–adhesive interface was analyzed using five methods with the objective of quantitatively assessing penetration of adhesive into the porous wood network. Methods included fluorescence microscopy, scanning electron microscopy, backscatter electron imaging, wavelength dispersive spectroscopy, and X-ray microtomography (XMT). Each method provided a visual inspection, and all of the analysis methods were applied to the same field of view. XMT was the primary technique of interest. Rubidium hydroxide was used in place of sodium hydroxide in the formulation of phenol–formaldehyde adhesive. Rubidium was found to increase the X-ray attenuation of the adhesive. However, rubidium migrated beyond the adhesive interphase during specimen preparation, thus reducing its effectiveness for image contrast enhancement. The wood species studied included red oak (Quercus rubra), Douglas-fir (Pseudotsuga menziesii), and hybrid poplar (Populus deltoides × Populus trichocarpa). All techniques used for this study were useful, but each presented some limitations for bondline analysis. Despite the problem with rubidium migration, XMT for this application was promising.     

Defining the poor by the rural communities of Burkina Faso: implications for the development of sustainable parkland management

Parklands are mixtures of trees and shrubs that farmers select for certain functions. In the Sahel, parklands are cultivated together with staple food crops, such as millet and sorghum. Parkland trees are sources of foods, including fruits, fats, oils, leafy vegetables, nuts and condiments that complement food crops in the local diet. Despite their socio-economic and ecological role, many studies have shown that the parklands are degrading very rapidly. Therefore, there is a need to undertake restoration actions that are based on a clear understanding of the livelihood context, such as the wealth status of the farmers, in which these agroecosystems are evolving. Thus, we conducted a wealth survey with rural communities in two different farming systems of Burkina Faso that are the cereal-based system in the “Plateau Central” and the cotton-based system in the “Boucle du Mouhoun”. A total of twelve villages were sampled, six villages for each system. The Participatory Analysis of Poverty and Livelihood Dynamics (PAPoLD) method was used by rural farmers to rank farmer households of their communities according to their wealth status. The results revealed that 70% of households in the Plateau Central and 56% in the “Boucle du Mouhoun” managed to escape poverty, and became wealthy. However, 2% of households of the villages in the Plateau Central and 6% in “Boucle du Mouhoun” fell into poverty in the same period whereas 9 and 12% remained poor in these zones, respectively. The main causes associated with households getting out of poverty are subsidies for cotton, external revenues from relatives working in towns and gardening activities. Death of spouse, illness, high number of people in the household and indebtedness are the main causes that lead into poverty. The implications of these findings in designing appropriate policies and management options for a sustainable management of agroforestry parklands under different land use systems were finally discussed.     

Do multipurpose companion trees affect high value timber trees in a silvopastoral plantation system?

Establishment of native timber trees on deforested land may contribute to the livelihood of farmers, to improved ecosystem services and to increased greenhouse gas uptake. Here, we present a new silvopastoral planting design to assess species performance and interspecific competition or facilitation effects among native timber and multipurpose trees in Central America. Two timber species, Tabebuia rosea and Cedrela odorata, were established in three low-density planting regimes allowing combined tree and future livestock production: (1) solitary planting, (2) companion planting with Guazuma ulmifolia, and (3) companion planting with the nitrogen-fixing Gliricidia sepium. We quantified survival, growth and reforestation potential of the two timber species subjected to the different planting regimes for the first 2 years after establishment. Nitrogen concentration as well as stable nitrogen and carbon isotope composition (δ¹⁵N, δ¹³C) of leaves of the timber saplings were determined. T. rosea showed higher survival and better growth than C. odorata under varying environmental conditions (soil, concomitant vegetation). Performance of the timber saplings was unaffected by either companion species. Planting regimes had no effect on foliar nitrogen concentration and δ¹⁵N of the two timber species, although δ¹⁵N values indicated nitrogen fixation activity in G. sepium trees. Planting regimes affected foliar δ¹³C values in T. rosea. δ¹³C values were significantly higher in solitarily growing individuals, suggesting lower exposition to water stress conditions in saplings surrounded by companion species. As we found positively correlated growth traits among timber and multipurpose trees, a combined planting may benefit farmers by providing additional goods and services.     

Composted biosolids as a source of iron for hybrid poplars (<Emphasis Type="Italic">Populus</Emphasis> sp.) grown in northwest New Mexico

Composted sewage sludge (biosolids) supply plant available Fe and may represent a sustainable alternative to more costly chelated Fe fertilizers currently used to supplement nutrition in hybrid poplar test plots of elevated soil pH. To test the response of poplars, field plots were amended with composted biosolids at two agricultural rates: 22.75 and 44.5 Mg ha⁻¹. Iron EDDHA served as a fertilizer check and control plots received no amendment. The hybrid poplar OP-367 (Populus deltoides × P. nigra) was planted on a 3.6 m grid spacing. Significant amounts of P and Fe originating from the sewage treatment process were detected in soils 13 months after amending. Chlorosis evaluated with a SPAD-502 meter, showed that poplars amended with biosolids remained the least chlorotic and had greater tree growth when compared to Fe EDDHA and control plots during two growing seasons. Biosolids show promise as a cost effective alternative for the remediation of Fe chlorosis in hybrid poplar agroforestry plantations and present new opportunities in northwestern New Mexico for municipalities seeking solid waste land disposal options.