激振式扭转疲劳试验台载荷波形畸变分析

针对行星式离心激振扭转疲劳试验台在进行汽车传动轴扭转疲劳试验时出现的载荷波形畸变现象,分析了试验台扭振系统并建立了数学模型,导出交变扭矩幅值变化的数学表达式。通过试验分析和计算机模拟验证了数学模型,找到了扭矩波形畸变的根本原因,并提出了消除波形畸变的方法,为合理使用原有这类试验台及新设计这类试验台提供了理论依据。     

保雨灌溉技术的研究与推广

保雨灌溉技术的核心是向天空要水,与蒸发夺水,充分利用自然降水和土壤水分,满足作物需要。在作物需水不足时,提取地下水补充灌溉。三年试验结果表明,保雨灌溉比常规井灌年均节水2091mm/hm~2,增产粮食2020kg/hm~2,促进了优质高效农业的发展。     

车辆AMT离合器离散变结构控制

以车圆舞曲机械式自动变速系统（AMT）的离合器液压执行机构为研究对象，建立系统非线性动力学模型。进一步应用基于微分几何的反馈线性化方法，将原非线性系统等价为完全可控型线性化模型。在此基础上设计了离散变结构控制器，并且证明了离散变结构系统的稳定性，实验结果证明，这一控制器跟踪精度高，并且对系统的非线性和不确定性表现出很强的鲁棒性。     

临界风速气力输送模糊控制仿真

基于MATLAB／Simulink软件环境，建立了临界风速气力输送模糊控制模型，并进行了仿真研究。仿真结果表明，模糊控制器能很好地达到预期控制效果，并具有快速、准确的优点，从而解决了气力输送过程中按动耗最低原则自动调节和控制风速的问题，为气力输送系统的性能改进提供了一条途径。     

文丘里差压式喷灌施肥装置的性能研究

本文主要介绍100PS－1型文丘里差压式施肥装置的工作原理、水力学性能、施肥罐内肥料浓度的变化规律及施肥均匀度的试验数据。通过对试验结果的研究分析,我们认为采用这种形式施肥装置是完全符合喷灌系统对施肥的要求的。     

施水播种条件下灌溉水入渗模型研究

运用土壤动力学原理建立了灌溉水入渗的数学模型，并进行了实际灌水的试验验证，试验结果表明所建模型的模拟结果与试验结果吻合较好。应用模型模拟分析发现：适量增加沟宽或回土量可以减小入渗时间，缩短播种机排水口至排种口距离。     

影响单螺杆挤压膨化机性能因素的试验研究

对被挤压物料的熔融过程进行了分析，应用正交多项式回归设计法，找出转速，物料湿度，压力等因素对机器生产率，耗电量，膨化率等的影响，并用模糊数学综合评判法，通过多因素试验对机器的诸性能进行评价，得出优选组合排序，为提高单螺杆式挤压膨化机的性能和制品质量，提供了一定的理论依据。     

低温和近中温猪粪液厌氧处理的装置比较研究

作了ＵＢＦ、ＵＡＳＢ和厌氧上折流反应器处理猪粪过筛液运行性能的实验室比较。结果表明：它们的运行指标基本一致。综合比较，ＵＢＦ略优于ＵＡＳＢ，ＵＡＳＢ略优于上折流反应器。在发酵温度１０℃段，负荷１．９～２．３ｇＣＯＤ／（Ｌ·ｄ），装置产气率平均０．３２～０．５１Ｌ／（Ｌ·ｄ），ＣＯＤ平均去除率８２．２％～９１．０％；１５℃段，负荷２．５～２．６ｇＣＯＤ／（Ｌ·ｄ），装置产气率０．５７～０．５９Ｌ／（Ｌ·ｄ）；２５℃段，负荷５．５～５．７ｇＣＯＤ／（Ｌ·ｄ），装置产气率１．９３～２．０１Ｌ／（Ｌ·ｄ）。     

长时序海量土地利用时空数据统计优化方法

针对任意查询区域年度现状地类面积统计困难、长时序变更流量分析计算耗时等问题,提出基于时空变化图模型的统计优化方法。运用图的连通性原理,对查询统计区域内和边界处的要素实体进行分类,实现了时序快照统计优化算法,解决了任意查询区域时点现状统计困难的问题,提高了时序快照统计的效率。运用多商品流原理进行时空网络图约化性判定,实现了变更流量统计优化算法,减少了要素空间叠置分析次数,解决了长时序土地利用变化变更流量统计耗时问题,提高了统计的效率。最后,以2009—2012年琼海市土地利用数据为例,进一步验证优化算法的有效性和可行性。     

Modeling soil water dynamics in a drip-irrigated intercropping field under plastic mulch

Intercropping, drip irrigation, and the use of plastic mulch are important management practices, which can, when utilized simultaneously, increase crop production and save irrigation water. Investigating soil water dynamics in the root zone of the intercropping field under such conditions is essential in order to understand the combined effects of these practices and to promote their wider use. However, not much work has been done to investigate soil water dynamics in the root zone of drip-irrigated, strip intercropping fields under plastic mulch. Three field experiments with different irrigation treatments (high T1, moderate T2, and low T3) were conducted to evaluate soil water contents (SWC) at different locations, for different irrigation treatments, and with respect to dripper lines and plants (corn and tomatoes). Experimental data were then used to calibrate the HYDRUS (2D/3D) model. Comparison between experimental data and model simulations showed that HYDRUS (2D/3D) described different irrigation events and SWC in the root zone well, with average relative errors of 10.8, 9.5, and 11.6 % for irrigation treatments T1, T2, and T3, respectively, and with corresponding root mean square errors of 0.043, 0.035, and 0.040 cm³ cm^?3, respectively. The results showed that the SWC in the shallow root zone (0–40 cm) was lower under non-mulched locations than under mulched locations, irrespective of the irrigation treatment, while no significant differences in the SWC were observed in the deeper root zone (40–100 cm). The SWC in the shallow root zone was significantly higher for the high irrigation treatment (T1) than for the low irrigation treatment, while, again, no differences were observed in the deeper root zone. Simulations of two-dimensional SWC distributions revealed that the low irrigation treatment (T3) produced serious severe water stress (with SWCs near the wilting point) in the 30–40 cm part of the root zone, and that using separate drip emitter lines for each crop is well suited for producing the optimal soil water distribution pattern in the root zone of the intercropping field. The results of this study can be very useful in designing an optimal irrigation plan for intercropped fields.