Histopathological changes and tissue residue concentrations of monosex Nile tilapia (Oreochromis niloticus,L) fries exposed to oxytetracycline

Aquaculture International - The current study evaluated the biosafety of oxytetracycline (OTC) exposure for 30 days in monosex Oreochromis niloticus fries. The fries were exposed to OTC...     

Processing of commercial peanut cake into food-grade meal and its utilization in preparation of cookies

The commercial cake produced during expeller pressing of peanuts was extracted with n-hexane, and 80% ethanol followed by sieving through 80 mesh, to remove residual oil, pigments, bitter taste and fibrous material. The processed meal exhibited comparable composition with defatted peanut flour prepared in the laboratory by solvent extraction of full-fat peanut meal. However, the processed cake meal exhibited low methionine content and in vitro protein digestibility as compared with defatted peanut flour. The processed cake meal can be blended with wheat flour to the extent of 10% (w/w) to prepare acceptable cookies with improved protein and mineral contents.     

Nitrogen dynamics and crop growth on an Alfisol and a Vertisol under a direct-seeded rainfed lowland rice-based system

Rice (Oryza sativa L.) followed by chickpea (Cicer arietinum L.) or a fallow is one of the predominant cropping systems in the rainfed lowlands of India. Crop rotation experiments over 3 years (1996–1998) to quantify N supply and demand under rainfed lowland rice–chickpea and rice–fallow cropping systems on a loam Alfisol and a clay Vertisol in Raipur, India were conducted under direct-seeded rice culture. The rice growth, yield, development and N accumulation were affected most by N rates (0, 40, 80, 120 kg ha⁻¹) followed by cropping system (rice–chickpea, rice–fallow) and soil types (Alfisol, Vertisol). The incorporation of chickpea in the cropping system helped in accumulating a greater amount of soil N than fallow. The rice yield, dry matter and N accumulated were significantly higher in rice–chickpea than rice–fallow systems on both soils and in all years. The lowest rice yields were recorded in 1997 due to unfavorable rainfall distribution. The total rainfall was the highest in this season, but most of it occurred during a short period at an early growth stage. The post-heading rains were lowest in this season and resulted in the lower rice yield as compared with that of 1996 and 1998. This indicates the significance of rainfall distribution in controlling yield in a rainfed environment. The rice yields were lower on Vertisol than Alfisol during periods of drought. The performance of chickpea was also better in Alfisol as compared with that in the Vertisol due to its better soil physical attributes. The residual effect of N applied to the preceding rice crop was non-significant on all yield, growth and N accumulation parameters of chickpea. The N balance computed from the top 70 cm soil layers indicated less N loss in the rice–chickpea system as compared with that in rice–fallow. The recovery efficiency at the highest N rate (120 kg N ha⁻¹) was higher for the rice–chickpea (57–61%) than that of rice–fallow (49–53%) system. The improved N balance for rice–chickpea system from third year onwards was due to switch to dry seeding and improved soil N status. The inclusion of legume and the effective capture of biologically fixed N and soil N through direct-seeded rice system in rainfed lowlands may help in improving the rice yield of resource poor farmers.     

Removal of methylene blue by amidoxime polyacrylonitrile-grafted cotton fabrics: Kinetic,equilibrium, and simulation studies

In this study, an amidoxime-grafted cotton fabric ion exchanger was developed for methylene blue (MB) removal from wastewater. The ability of the amidoxime-grafted cotton fabrics to remove MB ions from an aqueous solution was investigated in equilibrium, kinetics and thermodynamics studies. Equilibrium data agreed well with the Freundlich and Langmuir isotherm models. The result indicated that, based on the Langmuir coefficient, the maximum capacity (monolayer saturation at equilibrium) of the amidoxime-grafted cotton fabric was 22.27 mg/g. The kinetic data were found to follow the pseudo-second-order model, and intra-particle diffusion is the sole rate-controlling factor. Negative values of ΔG ⁰, ΔH ⁰, and ΔS ⁰ revealed the spontaneous, exothermic and entropy-driven nature of the process.     

Effect of soil salinity levels on growth and chemical composition of Syzygium cumini L.

Seedlings of Syzygium cumini were grown in artificially salinized soils of conductivities 0 to 20 mmhos cm^-1 for 19 months. Adverse effects on growth were seen at and above a conductivity level of 16 mmhos cm^-1 of the saturation extract. As the conductivity increased, the adverse effects of growth and the extent of plant injury were intensified As salinity increased, the leaf chlorophyll content at the end of the experiment decreased. The leaf N content did not differ significantly, but the root N content was significantly lower at higher salinity levels. With increased salinity the K, Ca, Mg, Zn and Fe in the leaves and roots lessened, but leaf Na rose in concentration with increasing salinity. The Mn and Cu contents of leaves and roots did not differ significantly.     

A major QTL for plant height is linked with bloom locus in sorghum [Sorghum bicolor (L.) Moench]

Plant height is one of the most important agronomic traits in sorghum with its relevance for biomass, grain yield, fodder and lodging. To understand its genetic basis, the quantitative trait loci (QTL) were identified using a recombinant inbred line (RIL) population consisting of 168 RILs derived from the cross between the two sorghum inbred lines 296B (dwarf) and IS18551 (tall) over six seasons. Two major QTL were identified one each on chromosomes SBI-06 and SBI-07 corresponding to the Dw2 and Dw3 gene loci together accounting 41 % plant height variation. In addition, a morphological bloom trait locus which remained unlinked in the linkage map was found to be significantly linked with plant height in single marker analysis explaining 22 % of the trait variation. By comparing the map positions of Dw1, Dw2 and Dw3, the new locus for plant height linked with bloom is proposed as Dw4 locus. Both SSR and the morphological bloom loci linked with height QTL of the present study can be employed as effective tools in marker-assisted breeding for rapid conversion of selected inbred parent lines either as dwarf seed (male sterile) parents or taller pollinators for hybrid seed industry, or for developing high biomass lines in sweet sorghum for exploitation as high bio-fuel crop.     

Marker‐assisted breeding of Pi‐1 and Piz‐5 genes imparting resistance to rice blast in PRR78, restorer line of Pusa RH‐10 Basmati rice hybrid

Rice blast, caused by fungus Magnaporthe grisea, is a serious disease causing considerable economic damage worldwide. Best way to overcome disease is to breed for disease‐resistant cultivars/parental lines of hybrids. Pusa RH10, first aromatic, fine‐grain rice hybrid released and cultivated extensively in India. Hybrid and its parental lines, Pusa 6A and PRR78, are highly susceptible to blast. CO39 pyramid carrying two dominant, broad‐spectrum blast‐resistance genes, viz. Pi‐1 and Piz‐5, used as a donor parent to introgress these genes into PRR78 using marker‐assisted backcrossing (MABC). Microsatellite markers RM5926 and AP5659‐5 tightly linked to Pi‐1 and Piz‐5 genes, respectively, were used for foreground selection to derive introgression lines. Further, these lines were evaluated for agronomic performance, disease reaction and cooking quality traits along with PRR78. Most of the improved lines were on par with PRR78 for all traits evaluated except gelatinization temperature. Recurrent parent genome percentage (RPG) study also revealed similarity of these lines with PRR78. Hybrids derived using improved PRR78 lines were superior over Pusa RH10 in terms of yield.     

Potential of extracts of the tropical plant Balanites aegyptiaca (L) Del. (Balanitaceae) to control the mealy bug, Maconellicoccus hirsutus (Homoptera: Pseudococcidae)

The effects of extracts of different parts of the perennial tropical plant Balanites aegyptiaca (L) Del., including various solvent extracts of roots, methanol extracts from leaves, fruits, flowers and roots, partially purified saponins obtained from its roots and a standard saponin were studied on the life cycle (adult longevity, number of eggs, crawlers, adults, weight of adults and % wax content) of a laboratory-reared parthenogenic line of the mealy bug, Maconellicoccus hirsutus (Homoptera: Pseudococcidae). Extracts derived from various parts of B. aegyptiaca (leaves, fruits, flowers, and roots in methanol) affected the life cycle of M. hirsutus with a methanol root extract being the most effective at a concentration of 500 μg ml⁻¹. Partially purified saponin of B. aegyptiaca and the commercial bark saponin extract (Sigma) from Quillaja saponaria at a concentration of 500 μg ml⁻¹ were effective in reducing the longevity of M. hirsutus. Significant reductions in oviposition by M. hirsutus were found for all the extracts at a concentration of 500 μg ml⁻¹. Extracts also affected the number of emerging crawlers, number of adults as well as the weight and wax content of emerging adults. These studies suggest that B. aegyptiaca plant extracts and saponins can be useful botanical insecticides for the protection of crops from mealy bugs.     

Studies on life cycle of mealybug, Maconellicoccus hirsutus (Green) (Hemiptera: Pseudococcidae), on different hosts at different constant temperatures

The life cycle of a laboratory reared parthenogenic line of mealybug, Maconellicoccus hirsutus (Green) (Hemiptera: Pseudococcidae) was investigated on six host plants (Lagenaria siceraria var.clavata, Solanum tuberosum L. var. Kufri Chandramukhi, Praecitrullus fistulosus (Stocks) Pangalo var. MTNH1, Cucurbita pepo var. Styriaca, Triticum aestivum L. var. Lokvan, H. rosa sinensis L.) at five constant temperatures (25, 29, 35, 38, 42 °C). The number of emerging crawlers and adults as well as weight of adults varied with host and temperature. P. fistulosus and H. rosa sinensis were suitable hosts for laboratory rearing of M. hirsutus. However, ease of maintenance of P. fistulosus to produce M. hirsutus under laboratory conditions is an additional advantage compared to using green plants such as H. rosa sinensis. Among the range of constant temperatures, 38 °C was found to be the most favourable for the development and survival of M. hirsutus. These results suggest that P. fistulosus fruits are suitable hosts for laboratory rearing and life cycle studies of M. hirsutus.     

Water budgeting in a carp‐prawn polyculture system: impacts on production performance,water productivity and sediment stack

This study was designed to quantify the total water requirement and consumptive water use in carp‐prawn polyculture system under different water management protocols, using water balance model. Under different water management protocols, treatment‐wise estimated total water use, TWU (×10⁴, m³) was 3.7, 4.6 and 3.9, while the computed consumptive water use index, CWUI (m³ kg^?1 biomass) was 6.62, 9.31 and 7.08, in T₁ (no water exchange), T₂ (periodic water exchange) and T₃ (regulated water exchange) respectively. Significantly higher yield (P < 0.05) in both T₂ and T₃ over T₁, was probably due to water exchange that improved the rearing environment. Although intensity of water exchange was more in T₂, significant variation (P < 0.05) in overall growth and yield was not recorded between T₂ and T₃. Treatment‐wise sediment load ranged between 54.6 and 71.3 m³ t^?1 biomasses. Higher sediment load was recorded at lower intensity of water exchange as well as with higher apparent feed conversion ratio. Higher net total water productivity, net consumptive water productivity and OV‐CC ratio in T₃ infers that regulated water exchange has a distinct edge over the no water exchange protocol. Restricted water use instead of regular/excess water exchange not only improves the production performance and water productivity, but also helps in lessening the operational pumping cost.