Influence of organic and inorganic passivators on Cd and Pb stabilization and microbial biomass in a contaminated paddy soil

Purpose

Soil contamination with heavy metals, such as Cd and Pb, has caused severe health and environmental risks all over the world. Possible eco-friendly solutions for Cd and Pb immobilization were required to reduce its mobility through various cost-effective amendments.

Materials and methods

A laboratory incubation study was conducted to assess the efficiency of biochar (BC), zeolite (ZE), and rock phosphate (RP) as passivators for the stabilization of Cd and Pb in paddy soil as well as soil microbial biomass. Various extraction techniques were carried out: a sequential extraction procedure, the European Community Bureau of Reference (BCR), toxicity characteristic leaching procedure (TCLP) test, and single extraction with CaCl₂. The impact of passivators on soil pH, dissolved organic carbon (DOC), and microbial biomass (carbon, nitrogen, and phosphorus) was examined in the metal contaminated soil.

Results and discussion

The results showed that the exchangeable portion of Cd in soil was significantly reduced by 34.8, 21.6, and 18.8% with ZE, RP, and BC at a 3% application rate, respectively. A similar tendency of reduction in Pb soluble portion was observed by ZE (9.6%), RP (20%), and BC (21.4%) at a 3% application rate. Moreover, the TCLP leachate of Cd and Pb was apparently reduced by 17 and 30.3% with BC at a 3% application dose, respectively, when compared to the control. Soil pH, nutrients, and microbial biomass C, N, and P were significantly increased with the addition of BC, RP, and ZE passivators.

Conclusions

The results showed that the incorporation of BC, ZE, and RP significantly reduced the Cd and Pb mobility in paddy soil as well as enhanced soil nutrients and microbial biomass. Overall, among all the amendments, rice straw derived-BC performed better for Cd and Pb immobilization in paddy soil.

     

Determination of the role of salicylic acid and Benzothiadiazole on physico-chemical alterations caused by <Emphasis Type="Italic">Cucumber mosaic virus</Emphasis> in tomato

Shoe-string disease caused by Cucumber mosaic virus (CMV) is one of the major threats to tomato production worldwide. The alteration in some biochemical parameters in leaves of the susceptible tomato genotype (Nagina) associated with CMV infection and the effect of exogenous application of salicylic acid (SA) and benzothiadiazole (BTH) were studied in this paper. Results showed that exogenous treatment with SA and BTH not only led to plants which gave significantly more yield than diseased controls (DC), but also delayed symptom expression and reduced disease severity. Analysis of biochemical parameters indicated that exogenous application of elicitors and viral infection, significantly affected the activity of peroxidase (POD), superoxide dismutase (SOD), catalase (CAT) and ascorbate peroxidase (APX). Compared to the DC plants, minimum disease severity and maximum number of fruit were recorded after a single dose of SA + BTH. Maximum plant height was recorded after weekly application of SA and maximum fruit yield per plant was gained with single dose of SA. Moreover, the activity of POD was significantly elicited many-fold after weekly application of SA + BTH, while higher amount of SOD was recorded with single dose of SA. The activity of CAT was also significantly accelerated after weekly application of SA + BTH while increased level of APX was noticed with single dose of BTH. In conclusion, the combined application of SA and BTH played an important role in induction of defense mechanism against CMV infection and can be useful in tomato disease management programs.     

Increasing Farm Productivity and Soil Fertility on Sustainable Basis Through “Summer Gap” Utilization with Biochar and Legumes

To reduce reliance on scientific fertilizer due to rapid increase of fertilizer prices and environmental constraint, it necessary to improve crop productivity and soil fertility on sustainable basses. Utilization of “summer gap” through biochar and legumes have pleasant effects on improving crop productivity and soil fertility on long term basses. Two years’ field experiments were conducted on wheat and maize crops with “summer gap” utilization with legumes and biochar at research farm of agronomy, the University of Agriculture Peshawar during 2011–2013. Wheat-maize-wheat cropping system was followed with the adjustment of legumes in “summer gap” (land available after wheat harvest till maize sowing). Legumes i.?e. mung bean, cowpea and Sesbania with a fallow were adjusted in the “summer gap” with and without biochar application. Biochar was included at the rate of 0 and 50?t?ha^-1 with four N levels of 0, 90, 120, 150 and 0, 60, 90, 120?kg?ha^-1 to subsequent maize and wheat crops, respectively. In legumes’ experiment, biochar increased fresh and dry fodder yield in cowpea and Sesbania, grain and biological yields in mung bean. In maize experiments, biochar improved grain yield. Nitrogen application increased grain and biological yields. In wheat experiments with increasing nitrogen level enhanced biological and grain yields. It is concluded that use of biochar and legumes in “summer gap” improve overall farm productivity and soil fertility on sustainable basses.     

Suitability of common models to estimate hydrology and diffuse water pollution in North-eastern German lowland catchments with intensive agricultural land use

Various process-based models are extensively being used to analyze and forecast catchment hydrology and water quality. However, it is always important to select the appropriate hydrological and water quality modeling tools to predict and analyze the watershed and also consider their strengths and weaknesses. Different factors such as data availability, hydrological, hydraulic, and water quality processes and their desired level of complexity are crucial for selecting a plausible modeling tool. This review is focused on suitable model selection with a focus on desired hydrological, hydraulic and water quality processes (nitrogen fate and transport in surface, subsurface and groundwater bodies) by keeping in view the typical lowland catchments with intensive agricultural land use, higher groundwater tables, and decreased retention times due to the provision of artificial drainage. In this study, four different physically based, partially and fully distributed integrated water modeling tools, SWAT (soil and water assessment tool), SWIM (soil and water integrated model), HSPF (hydrological simulation program– FORTRAN) and a combination of tools from DHI (MIKE SHE coupled with MIKE 11 and ECO Lab), have been reviewed particularly for the Tollense River catchment located in North-eastern Germany. DHI combined tools and SWAT were more suitable for simulating the desired hydrological processes, but in the case of river hydraulics and water quality, the DHI family of tools has an edge due to their integrated coupling between MIKE SHE, MIKE 11 and ECO Lab. In case of SWAT, it needs to be coupled with another tool to model the hydraulics in the Tollense River as SWAT does not include backwater effects and provision of control structures. However, both SWAT and DHI tools are more data demanding in comparison to SWIM and HSPF. For studying nitrogen fate and transport in unsaturated, saturated, and river zone, HSPF was a better model to simulate the desired nitrogen transformation and transport processes. However, for nitrogen dynamics and transformations in shallow streams, ECO Lab had an edge due its flexibility for inclusion of user-desired water quality parameters and processes. In the case of SWIM, most of the input data and governing equations are similar to SWAT but it does not include water bodies (ponds and lakes), wetlands and drainage systems. In this review, only the processes that were needed to simulate the Tollense River catchment were considered, however the resulted model selection criteria can be generalized to other lowland catchments in Australia, North-western Europe and North America with similar complexity.     

Agricultural Exports Competitiveness of Pakistan in Global Market

Agricultural sector is a major source of employment and export earnings for Pakistan. Exports of Pakistan are highly concentrated in agricultural products including cotton, rice, sugar and fruit. This study analyzed comparative and competitive advantages of the main agricultural products of Pakistan, i.e. cotton, rice and tangerines. Consumption patterns of top exporting countries in each category were also analyzed. Results revealed that Pakistan had strong competitiveness for export of these commodities. Strong potential for growth in the agricultural sector of Pakistan was found and it could be optimized to raise export earnings and meet the objectives of the strategic trade policy framework(STPF) 2015-2018 of Pakistan.     

Mechanical,thermal and interfacial properties of green composites from basalt and hybrid woven fabrics

Composites based on pure Basalt and Basalt/Jute fabrics were fabricated. The mechanical properties of the composites such as flexural modulus, tensile modulus and impact strength were measured depending upon weave, fiber contents and resin. Dynamic mechanical analysis of all composites were done. From the results it is found that pure basalt fiber combination maintains higher values in all mechanical tests. Thermo-gravimetric (TG/DTG) composites showed that thermal degradation temperatures of composites shifted to higher temperature regions compared to pure jute fabrics. Addition of basalt fiber improved the thermal stability of the composite considerably. Scanning electron microscopic images of tensile fractured composite samples illustrated that better fiber-matrix interfacial interaction occurred in hybrid composites. The thermal conductivity of composites are also investigated and thermal model is used to check their correlation.     

Effect of Fruiting Branch/Square Removal on Growth and Quality of Bt Cotton under Different Potassium Rates

Removal of early fruiting branches with greater potassium doses caused more source and no sink at early stages of growth, leading to improved yield, yield components, and fiber quality traits in Bt cotton. The study used manual alteration of plant architecture (F₁, no branch removal; F₂, removal of first fruiting branch; F₃, removal of first and second fruiting branches; F₄, removal of all squares from first fruiting branch; F₅, removal of all squares from first and second fruiting branches) and potassium rates (50, 100, and 150 kg ha^?1) in a randomized complete block design and was repeated for 2 years (2011 and 2012). Increasing potassium application increased total bolls per plant and cotton yield to the greatest levels in F₃ and F₅, against lowest level in the control. Ginning out turn, fiber length, seed oil, and seed protein content were influenced by fruiting branch or square removal but the difference was less. Increasing potassium improved seed and fiber quality.     

Carbon mineralization in response to nitrogen and litter addition in surface and subsoils in an agroecosystem

More than 50% of global soil organic carbon stocks are stored below 20 cm of soil depth capable of massively altering global C cycle and climate. However, subsoil C dynamics are largely overlooked implicitly assuming that surface and subsoil C dynamics are similar. Here, we compared the soil C dynamics in surface and subsurface soil layers in response to nitrogen and maize leaf litter additions. Soils, sampled from 0 to 5, 15 to 35, 35 to 55 and 55 to 75 cm depths, were incubated at 25°C after adding litter, nitrogen (NH₄NO₃) or litter plus nitrogen. Soil respiration (C mineralization) was measured throughout the incubation period. Litter addition significantly increased C mineralization in all the soil layers. However, the soil CO₂ release relative to control was more than twofold higher in 15–35 and 35–55 cm soil layers than the surface layer. Nitrogen additions significantly decreased C mineralization in 0–15 cm soil, increased in 35–55 cm and had minimal effects in the 15–35 and 55–75 cm layers. Different soil C dynamics in surface and subsurface soil layers found in our study contradict the general assumption that soil C dynamics may be treated similarly along different soil depths.