Interaction of Different Wheat Genotypes and Nitrification Inhibitor 3,4-Dimethylpyrazole Phosphate Using 15N Isotope Tracing Techniques

To investigate the effect of applying ¹⁵N-labeled ammonium sulfate with or without a nitrification inhibitor 3,4-dimethylpyrazole phosphate (DMPP) on fertilizer use efficiency and crop productivity of different wheat genotypes, a field trial was conducted at the Nuclear Agricultural Department’s farm of Iran in 2013–2014. The treatments included five wheat genotypes with different 13 C isotope discrimination and three fertilizer treatments, an unfertilized control, ¹⁵N-labeled ammonium sulfate, and ¹⁵N-labeled ammonium sulfate with DMPP in three replications. Soil samples were taken after 2, 4, and 6 weeks after sowing and also at harvest time. Results from ¹⁵N experiment showed that DMPP delayed nitrification of ammonium for 42 days. Genotypes with lower discrimination index had greater uptake of ammonium ions which led to increase crop yield and nitrogen fertilizer use efficiency. The results also suggested that the use of DMPP may not be beneficial in some fast growing wheat genotypes.     

Germination and growth response of flax (Linum usitatissimum) to salinity stress by different salt types and concentrations

This investigation was conducted to explore the effects of salt types with different concentrations on germination and growth parameters of flax seeds. The experiment was set out as a factorial experiment based on a completely randomized design with three replications. We used six kinds of salts (NaCl, CaCl₂, CaCO₃, Na₂SO₄, Na₂CO₃ and KCl) with concentrations of 0, 50, 100 and 200 mM. According to the results, the inhibitory effects of the five salt types differed substantially, especially in the case of CaCO₃, Na₂CO₃ and Na₂SO₄. Inhibitory effects of these salts were very strong compared to those of NaCl and CaCl₂. Germination of flax seeds by various salts was in the order of NaCl > CaCl₂ > KCl > Na₂CO₃ > Na₂SO₄ > CaCO₃. The effect of salt concentration was obvious, too. Seeds of flax were able to germinate even in 200 mM NaCl, but they only germinated in distilled water or at very low CaCO₃, Na₂CO₃ and Na₂SO₄ concentrations (50 mM).     

Calibration of Hargreaves–Samani equation for estimating reference evapotranspiration in semiarid and arid regions

The Penman–Monteith (FAO-56 PM) equation is suggested as the standard method for estimating evapotranspiration (ET₀) by the International Irrigation and Drainage Committee and Food and Agriculture Organization (FAO). On the other hand, the Hargreaves–Samani (HS) equation is an alternative method compared with the FAO-56 PM equation. In the present study, the original coefficient C of the HS equation is calibrated based on the FAO-56 PM equation for estimating the reference ET₀ from 15 meteorological stations in central Iran (about 170,000 km²) under semiarid and arid conditions. After calibration, the new values for C are ranged from 0.0018 to 0.0037. The mean bias error (MBE), the root mean square error (RMSE), and the ratio of average estimations of ET₀ (R) values for all stations are ranged from 0.12 to 5.38, ?5.35 to 1.15 mm d^?1 and 0.64 to 1.28 for the HS equation and from 0.12 to 2.48, ?2.2 to 0.60 mm d^?1, and 1.00 to 1.05 for the calibrated Hargreaves–Samani equation (CHS), respectively. Results indicate that the average RMSE and MBE values are decreased by 40% and 66%, respectively. Relationships for calibrating the C coefficient on the basis of annual average of daily temperature range (ΔT) and wind speed (V) are proposed, calibrated, and validated. Hence, the CHS equation can be used for ET₀ estimates with acceptable accuracy instead of the FAO-56 PM method.     

Crop sequences and fertilization affect soil vital enzyme activities

This experiment was conducted in split plots based on randomized complete block design with three replications. Three crop sequences: (R1): chickpea, sunflower, wheat, and canola; (R2): green manure, chickpea, green manure, wheat, green manure, and canola; (R3): canola, wheat, and canola were used as main plots. Sub plots consisted of six methods of fertilization: (N1): farmyard manure; (N2): compost; (N3): chemical fertilizers; (N4): farmyard manure + compost; (N5): farmyard manure + compost + chemical fertilizers; and (N6): control. Results showed that the enzyme activities were higher in the N4 treatment. The highest amount of acid phosphatase, protease, dehydrogenase activity, and grain yield was observed in R2 sequence. The highest urease activity (58.6 µg g^?1 h^?1) was obtained in R2N4 treatment. In R2N4 treatment using in-farm inputs, a non chemical fertilizer system can be carried out to improve soil biological activity.     

Effects of inoculation with stress-adapted arbuscular mycorrhizal fungus Glomus deserticola on growth of Solanum melogena L. and Sorghum sudanese Staph. seedlings under salinity and heavy metal stress conditions

The beneficial effects of a Glomus deserticola strain isolated from the rhizosphere of grasses (belonging to Poaceae family) growing along the industrial waste from a distillery were investigated under stress conditions. The study was conducted to assess the efficacy of the arbuscular mycorrhizal (AM) fungal ecotype in salinity and heavy metal (HM) tolerance of eggplant (Solanum melongena L.) in soils amended with various stress levels of NaCl, zinc and cadmium. Mycorrhizal (M) seedlings produced a significantly (p < 0.05) greater growth response and were more tolerant to salt and HM stresses than nonmycorrhizal (NM) seedlings in all treatments. The HM contents in the plant tissues were significantly higher in M than NM eggplants. Furthermore, when the efficacy was compared with other AM isolates in HM-polluted soils with Sudan grass (Sorghum sudanese Staph.) as a test plant, the AM ecotype responded best to these soils, as evident from the significantly greater growth response and its aggressiveness in colonizing roots in all soil types tested. These results suggest that this G. deserticola ecotype can be used as an effective tool to alleviate the adverse effects of excessive salinity and HM toxicity on plant growth. Finally, the isolate may have potential in the bioremediation of polluted soils.     

Foliar application of iron,zinc, and manganese nano-chelates improves physiological indicators and soybean yield under water deficit stress

Abstract

To investigate the effect of foliar application of nano-chelates of iron, zinc, and manganese subjected to different irrigation conditions on physiological traits, and yield of soybean (cultivar M9), a split plot experiment was conducted in a completely randomized block design with three replications in two crop years (2016–2017). The main plot included four levels of irrigation (I): full irrigation (I ₁), irrigation withhold at flowering stage (I ₂), irrigation withhold at podding stage (I ₃), and irrigation withhold during the grain filling period (I ₄). Also, the subplot included eight levels of foliar application with Fe, Zn, Mn, Fe?+?Zn, Fe?+?Mn, Zn?+?Mn, Fe?+?Zn?+?Mn nano-chelates, and distilled water (control). The results of combined analysis of variance suggested that the effect of irrigation and foliar application of nano-chelate was significant on all traits. Water deficit stress significantly reduced the grain yield. The minimum numbers of pods per plant, number of grains per plant, 100-seed weight per plant, leaf area index, leaf chlorophyll concentration, total dry weight of plant, and the grain yield were obtained by irrigation withhold at podding stage. Foliar application of combined nano-chelates increased the soybean resistance against water shortage more considerably than the separate consumption of these elements. Under drought stress in podding stage, the application of Fe?+?Zn led to the highest yield with a mean of 2613.84?kg ha^?1 where this increase was 61.1% higher than control.     

Plant Growth Promoting Rhizobacteria

Plant growth promoting rhizobacteria (PGPR) are soil bacteria with some beneficial effects on soil properties, plant growth and the environment. In this article, some of the most important advancements in the field of PGPR and their related properties are presented. Such knowledge can be important for understanding regarding the use of PGPR for different uses such as biological fertilization and alleviation of different stresses on plant growth and the environment.     

Using kale (Brassica oleracea var. acephala) as a phytoremediation plant species for lead (Pb) and cadmium (Cd) removal in saline soils

Ornamental kale (Brassica oleracea var. Acephala) is usually planted from early autumn until late winter. Since most of the plants used for phytoremediation cannot be grown during this time, kale can be a suitable option for phytoremediation and utilized during autumn and winter in urban landscape, especially in metropolitan areas where high levels of cadmium (Cd) and lead (Pb) pollutions exist. Kale growth in saline soil at different growth stages (germination and vegetative growth stages) was studied in this investigation. A factorial experiment based on completely randomized design (CRD) with four replications was used in this study. Treatments included three levels of sodium chloride (NaCl) (0, 30, and 60 mg/kg), four levels of Cd (0, 4, 8, and 16 mg/kg), and four levels of Pb (0, 1, 5, and 10 mg/kg). Results indicated that increase in Cd and Pb concentrations in the soil decreased fresh and dry weights of the plants. The results of the various growth stages revealed that under salinity stress, kale plants were able to absorb more Pb than Cd and effectively remediate Pb in polluted and saline lands. Cd accumulation in control treatment was 6.2% more than that in the saline treatments, whereas, Pb accumulation in the highest NaCl level, 60 mg/kg salinity treatment was 7.64% more than that of the control condition. Also, proline content of the plants was significantly increased under Cd and Pb stress. From the results of this study, it was concluded that using kale plant is recommended for phytoremediation of saline soils with 10 and 16 mg/kg Pb and Cd contents, respectively.     

Comparisons of RFLP and PCR-based markers to detect polymorphism between wheat cultivars

Previously chromosome 3A of wheat (Triticum aestivum L.) was reported to carry genes influencing yield, yield components, plant height, and anthesis date. The objective of current study was to survey various molecular marker systems for their ability to detect polymorphism between wheat cultivars Cheyenne(CNN) and Wichita (WI), particularly for chromosome3A. Seventy-seven `sequence tagged site' (STS), 10simple sequence repeat (SSR), 40 randomly amplified polymorphic DNA (RAPD) markers, and 52 restriction fragment length polymorphism (RFLP) probes for wheat homoeologous group 3 chromosomes, were investigated. Three (3.9%) STS-PCR primer sets amplified polymorphic fragments for the two cultivars, of which one was polymorphic for chromosome 3A. Sixty percent of SSR markers detected polymorphism between CNN and WI of which 50% were polymorphic for chromosome 3A. Twenty percent of RAPD markers detected polymorphism between CNN and WI in general, but none of these detected polymorphism for chromosome 3A. Of the fifty-two RFLP probes, 78.8% detected polymorphism between CNN and WI for group 3 chromosomes with one or more of seven restriction enzymes and 42% of the polymorphic fragements were for chromosome 3A. These high levels of RFLP and SSR polymorphisms between two related wheat cultivars could be used to map and tag genes influencing important agronomic traits. It may also be important to reconsider RFLP as the most suitable marker system at least for anchor maps of closely related wheat cultivars. This revised version was published online in July 2006 with corrections to the Cover Date.     

Identification of superior parents and hybrids for improving canola production under optimum and late sowing conditions

Major advancement in canola breeding depends on heterotic hybrids that require high general combining ability (GCA) and specific combining ability (SCA) inbred lines. In order to estimate heritability, gene action type, GCA, SCA and heterosis and to identify superior hybrids with wider adaptation to cold, one hundred canola hybrids were produced by crossing 10 lines and 10 testers in a Line?×?Tester mating design. The F₁ and F₂ generations were sown in α-lattice design in 2012 and 2013 growing seasons under optimum (early October) and late sowing (early November) conditions to be evaluated for days to flowering, days to physiological maturity, number of pods per plant, number of seeds per pod, thousand seed weight, seed yield and leaf electrical conductivity. The combined analysis indicated sufficient genetic diversity in the population and significant difference between two sowing date. The Line?×?Tester analysis presented significant GCA and SCA effects for all studied traits across optimum and late sowing conditions. The main gene action type was found to be non-additive, especially incomplete dominance and over-dominance in both conditions. Narrow-sense heritability ranged from low to moderate whereas broad-sense heritability was recorded more than 60% for all of the studied traits in both generations and conditions. The average heterosis in F₂ population for all studied traits was lower than that in F₁ representing this fact that heterosis is generally related to the heterozygosity at the population level and poorly correlated with heterozygosity at the individual level.