Nitrogen Fertilizer Management Practices to Reduce N<Subscript>2</Subscript>O Emissions from Irrigated Processing Potato in Manitoba

Nitrogen fertilizer practices affect nitrous oxide (N₂O) emissions from agricultural soils. The “4R” nutrient stewardship framework of using N fertilizer at the right rate, right source, right placement and right time can reduce N₂O emissions while maintaining or improving yield of field crops, but understanding of how the various factors affect N₂O emissions from irrigated processing potato is lacking. We examined the effects of selected 4R practices on emissions, using results from two irrigated processing potato studies each conducted in 2011 and 2012 in Manitoba, Canada. Experiment 1 examined combinations of source (urea, ESN), placement (pre-plant incorporation [PPI], banding), and rate (100 and 200 kg N ha^-1) on a clay loam soil. Experiment 2 examined timing and source treatment combinations (urea PPI, ESN PPI, urea split, urea split/fertigation) on a loamy fine sandy soil. For Experiment 1, use of ESN at 200 kg ha^-1 did not reduce area-, yield- and applied fertilizer N- based N₂O emissions compared to urea at 200 kg ha^-1, irrespective of placement. Emissions from pre-plant banding ESN at 200 kg ha^?1, however, were 32% lower than from PPI ESN. For Experiment 2, compared to single pre-plant urea application, fertigation simulated by in-season application of urea ammonium nitrate (UAN) gave lower area-, yield- and applied fertilizer N- based emissions. Split urea ( \( \raisebox{1ex}{$2$}\!\left/ \!\raisebox{-1ex}{$3$}\right. \) pre-plant, \( \raisebox{1ex}{$1$}\!\left/ \!\raisebox{-1ex}{$3$}\right. \) hilling) also reduced area- and yield- based N₂O emissions compared to single pre-plant urea application. Emissions were generally lower at the site with loamy fine sandy soil than the site with clay loam soil. These results demonstrate that combinations of “4R” practices rather than source alone are best to achieve reductions in N₂O emissions from irrigated potato production.     

Association of Potato Psyllid (<Emphasis Type="Italic">Bactericera cockerelli</Emphasis>; Hemiptera: Triozidae) with <Emphasis Type="Italic">Lycium</Emphasis> spp. (Solanaceae) in Potato Growing Regions of Washington,Idaho, and Oregon

Potato psyllid, Bactericera cockerelli (?ulc), causes economic damage to potato crops throughout the major potato growing regions of western North America. When cultivated crops are not available, potato psyllid often occurs on non-crop hosts. In the southern U.S. and northern Mexico, native species of Lycium (Solanaceae) are important non-crop hosts for the psyllid. We determined whether Old World species of Lycium now widespread in the Pacific Northwest are reservoirs of potato psyllid in this growing region. We examined Lycium spp. across a wide geographic region in Washington, Oregon, and Idaho at irregular intervals during three growing seasons. Potato psyllids were present at all locations. To determine whether Lycium is also a host during intervals of the year in which the potato crop is not available, we monitored a subset of these sites over the entire year. Six sites were monitored at 1- to 3-week intervals from June 2014 to June 2016. Psyllids were present on Lycium throughout the year at all sites, including during winter, indicating that Lycium is also a host when the potato crop is seasonally not available. Psyllid populations included a mixture of Northwestern and Western haplotypes. We observed well-defined spring and fall peaks in adult numbers, with peaks separated by long intervals in which psyllid numbers were very low. Seasonal patterns in psyllid numbers on these non-native Lycium hosts were very similar to what has been observed on native Lycium in the desert southwest region of the U.S. Our findings demonstrate that potato psyllid associates with Lycium across a broad geographic region within the Pacific Northwest. These results will assist in predicting sources of potato psyllid colonizing potatoes in this important growing region.     

Effect of Growth Regulators and Ethanol on Termination of Dormancy in Potato Tubers

The main objective of this study was to find the best practice of inducing the sprouting of dormant potato tubers. We compared two protocols of breakage of dormancy, which are based on dipping excised potato eyes in an aqueous solution of gibberellic acid (GA₃) and kinetin (standard 1) or in the aqueous solution of GA₃, thiourea, and daminozide (standard 2), with a newly reported approach based on ethanol. We tested the effect of ethanol alone or in combination with GA₃ and/or kinetin on dormancy release and sprouting of the potato tubers. As a model, we used two potato genotypes (cultivars Pasat and Dorota), with long dormancy of 5 and 10 weeks respectively. We showed that the standard 2 was the most effective treatment both for dormancy breaking and in promoting sprout growth, especially for cv. Dorota, for which the treatment induced 82.3% of tuber eye-plugs to sprout 28 days after treatment and to produce 93.2% of emerged plants after subsequent 28 days of cultivation in the greenhouse. For this cultivar, similar efficacy was observed for the combination of 4% ethanol with GA₃ and kinetin. The same concentration of ethanol combined with GA₃ but without kinetin was the most efficient treatment for breaking dormancy of cultivar Pasat. However, the difference between the various treatment combinations was statistically insignificant. Ethanol alone or in combination with kinetin poorly induced breakage of dormancy, confirming the main role of GA₃ in artificial dormancy breaking. Thus our study showed that the standard 2 is the most effective approach for breakage of dormancy at least with long term-dormancy cultivars.     

Nitrogen and Phosphorus Use Efficiency in Improved Potato (<Emphasis Type="Italic">Solanum tuberosum</Emphasis> L.) Cultivars in Southern Ethiopia

Use of nutrient efficient crop species or cultivars within species in combination with improved crop production practices offer the best option for meeting the future food requirements of growing world populations. Efficiency improvement has a key role for nutrient use and it improves both productivity of yield and minimizes risks of losses that potentially harm the environment. To improve nutrient use efficiency (NUE), one strategy is to select cultivars of crops with high NUE. Both nitrogen (N) and phosphorus (P) are among essential macronutrients commonly applied to agricultural crops to optimize yields. Evaluation of potato cultivars with high N and P efficiency is essential for sustainable production of the crop. In Ethiopia, however, little research has been done to elucidate better NUE of potato crop until recently. This study was, thus, designed to evaluate selected potato cultivars (Belete, Gudene, Jalene, Marachere and one local check) for NP use efficiency under low levels of the nutrients in Wolaita Sodo University, Ethiopia during 2014 and 2015. Factorial combination of 3 levels of each N (0, 55.5 and 111 kg N ha^?1 ) and P (0, 19.5 and 39 kg P ha^?1 ) were assigned to the main plots and the 5 cultivars to subplots of split-plot design in three replications. Efficiency indices such as agronomic efficiency, physiological efficiency and recovery efficiency were computed for combined NP nutrients. Results showed that agronomic nitrogen use efficiency, apparent phosphorus use efficiency and phosphorus use efficiencies were significantly influenced by the interaction effect of rates of NP nutrition and variety. Application of NP more than 55.5:19.5 kg ha^?1 will not beneficial due to their less or equal use and recovery efficiencies to 55.5:19.5 kg NP ha^?1. Belete was the most NP efficient variety followed by Jalene and Gudene in all efficiency indices. Therefore, Belete, Jalene and Gudene return better for NP at 55.5:19.5 kg ha^?1 for economical use of fertilizes while obtaining satisfactory yield. It can be concluded that yield response variation of the varieties was related to their differences in NP uptake and use efficiencies; and the improved potato varieties were superior to local check in using NP nutrients efficiently.     

Water and dye-free coloration of wool

A water and dye-free heat treatment method was used to color wool fibers. The heat effect changed wool fibers to different colors from white in a nitrogen atmosphere. The influences of heating temperature and time on the colors of wool were investigated and the mechanical property of colored wool fibers was evaluated. The color strength of wool fibers increased as heat treatment temperature and time increased. The tensile strength retention rate of wool fiber was relatively high (≥90 %) when the heat temperature was below 200 °C. The surface morphologies of wool fibers scarcely changed during the heat treatment. The carbon content of fibers was found to reduce by heat treatment, indicating oxidization of components in the wool fibers in the process of coloration. Heat treatment may provide a water and dye-free approach to color wool and other textile fibers, albeit within a limited color range.     

Optimization of curing process for polymer-matrix composites based on orthogonal experimental method

In this paper, the orthogonal experimental method was carried out to optimize the curing process of aeronautical composite X850/T800 in autoclave process. Four important curing parameters including curing pressure, heating rate, curing temperature and heat preservation time were taken into account, and sixteen samples were fabricated to study the effects of the four parameters mentioned above on the curing quality by interlaminar properties test and microstructure analysis. The interlaminar properties and the interfacial bonding quality of these samples were studied by the short-beam three points bending test and scanning electron microscopy, respectively. Results revealed that the optimal curing process of X850/T800 composite laminate should be as follows: curing pressure of 0.6 MPa, heating rate of 1.5 °C/min, curing temperature of 160 °C, and heat preservation time of 120 min.     

Effect of hybrid post treatments on the structural property and water flux of polysulfone hollow fiber membrane

The application of post treatments in preparation of high flux membranes is expanding rapidly. In this work, several hybrid post treatments have been introduced and used for change in the water flux of polysulfone (PSf) hollow fiber membranes. Dry wet spinning method was employed for fabrication of PSf hollow fiber membrane from spinning dope in mass ratio of 15:5:80 of PSf/PVP-K90/NMP. The simultaneous effects of single and hybrid post treatments containing traditional hypochlorite; high pressure injection technique (HPI) of hypochlorite, hot air and hot water treatments on the morphology and water flux of fabricated hollow fibers has been investigated. AFM analysis and image processing of SEM microphotographs of hollow fibers were used for structural studies. The mechanical properties of hollow fibers as well as strain at break and strength also were studied. It was found that the pores size and surface roughness parameter of hollow fiber membranes have been increased after traditional hypochlorite, HPI technique and hot water treatments while decreased when heat treated in air. In general all the employed hybrid post treatments caused to increase in the pores size of hollow fibers although the pores size increase rate in the membranes treated by the hybrid post treatments involving hot air was much lower than the others. The mechanical properties of hollow fibers have been decreased after hybrid and single post treatments containing traditional hypochlorite, HPI technique and hot water treatment while slightly increased after post treatments containing hot air. It was stated that the fabricated PSf hollow fibers were considerably affected by the employed hybrid post treatments. This can be attributed to the combine effects of used post treatments.     

Investigation on hydrostatic resistance and thermal performance of layered waterproof breathable fabrics

Waterproof breathable layered fabrics allow water vapor passing through, but resist liquid water to pass. This ability of the fabrics to protect rain and snow water while allowing sweat vapor to evaporate from inside to outside atmosphere, leads them to be used as outdoor sportswear or protective clothing. The big challenge of enhanced hydrostatic resistance of these fabrics with proper breathability and thermal comfort has widened the research scope. This study presents an experimental investigation on hydrostatic resistance and thermal behavior of layered waterproof breathable fabrics. Six different types of hydrophobic and hydrophilic membrane laminated layered fabrics were evaluated by varying different fabric parameters in the experiment. Hydrostatic resistance and water vapor permeability of the laminated fabrics were measured by SDL ATLAS Hydrostatic Head Tester and PERMETEST respectively. Thermal properties were evaluated by ALAMBETA instrument. Moreover, FX-3300 air permeability tester was used to measure air permeability which represents the porosity of the fabrics and computer based See System software was used for water contact angle measurement on the outer fabric surface in order to determine the hydrophobic and hydrophilic properties. This experiment clearly discusses the influence of different fabric characteristics and parameters on hydrostatic resistance and thermal properties of the breathable laminated fabrics. The results show that fabric material composition, density, thickness, and hydrophobic and hydrophilic membranes have significant effects on hydrostatic resistance, breathability and thermal properties of different laminated fabrics.     

Habitat modification by invasive crayfish can facilitate its growth through enhanced food accessibility

Background

Invasive ecosystem engineers can facilitate their invasions by modifying the physical environment to improve their own performance, but this positive feedback process has rarely been tested empirically except in sessile organisms. The invasive crayfish Procambarus clarkii is an ecosystem engineer that destroys aquatic macrophytes, which provide a physical refuge for animal prey, and this destruction is likely to enhance vulnerability to predators. Using two series of mesocosm experiments, we tested the hypothesis that the invasive crayfish increases its feeding efficiency on animal prey by reducing submerged macrophytes, thus increasing its individual growth rate in a positive density-dependent manner.

Results

In the first experiment, increasing crayfish density reduced both macrophytes and animal prey (dragonfly and chironomid larvae) and, importantly, increased the growth rate of individual crayfish, in accordance with our expectation. In the second experiment, we used artificial macrophytes to clarify whether the physical architecture of macrophytes itself protects animal prey and limits crayfish growth rate. Increasing the artificial macrophyte quantity not only increased the survival of animal prey, but also retarded the crayfish growth rate.

Conclusions

We conclude that macrophytes strengthen bottom-up control of crayfish, but this effect can be relaxed by increasing the density of crayfish via reduction in macrophytes. This positive feedback process may explain the crayfish outbreaks and regime shifts occasionally observed in invaded freshwater ecosystems.

     

Diversity of root-knot nematodes in Moroccan olive nurseries and orchards: does <Emphasis Type="Italic">Meloidogyne javanica</Emphasis> disperse according to invasion processes?

Background

Root-knot nematodes (RKN) are major pest of olive tree (Olea europaea ssp. europaea), especially in nurseries and high-density orchards. Soil samples were collected from main olive growing areas of Morocco, to characterize Meloidogyne species and to discuss the contribution of biotic and abiotic factors in their spatial distribution.

Results

RKN were found in 159 soil samples out of 305 from nurseries (52.1% occurrence) and in 11 out of 49 soil samples from orchards (23.2% occurrence). Biochemical and molecular characterisation (PAGE esterase and SCAR) revealed the dominance of M. javanica both in nurseries and orchards with minor presence of M. incognita only in nurseries, and M. arenaria in only one nursery. RKN were distributed on aggregated basis. Frequent presence of M. javanica in orchards might have come from nurseries. In contrast, the detection of M. incognita in nurseries alone suggests that this species could not reproduce in orchards because of either the competition with other plant-parasitic nematodes or unfit local habitats. The impact of environmental variables (climate, habitat origin and physicochemical characteristics of the substrates) on the distribution of Meloidogyne species is also discussed.

Conclusion

Olive nurseries in Morocco are not able to guarantee the safety of rooted plants. As a result, olive production systems are exposed to strong RKN invasion risks. Consequently, the use of healthy substrates in nurseries may prevent plant-parasitic nematode induction in orchards.