Generation and alteration of norlignans in a transition zone during the drying of a Cryptomeria japonica log

Sugi (Cryptomeria japonica D. Don) produces secondary metabolite norlignans in xylem. Several norlignans are involved in the coloration of heartwood and defense of sapwood against microbial invasion. Their biosynthetic process should be well understood so that their properties can be exploited to improve the quality and utility of C. japonica wood. Unfortunately, information on the norlignan biosynthesis is limited because norlignans are mainly synthesized in a particular season in the transition zone (TZ) along with the heartwood formation, and is difficult to study. Although the generation of two norlignans of C. japonica, agatharesinol and (E)-hinokiresinol, has been reported, systems for producing other norlignans are not yet known. To establish a novel norlignan generating system, we examined the changes occurring in norlignans in a TZ during the process of drying a C. japonica log. On the day of felling, the TZ contained agatharesinol and (E)-hinokiresinol, which increased until they reached a maximum on day 40 after felling. Sequirin-C appeared on day 40 and increased to day 70. The generation of sequirin-C in the TZ can be used to investigate the biosynthetic process of heartwood norlignans. This study describes for the first time the changes that occur in the composition of norlignan during the drying of the TZ.     

Spectrophotometrical characteristics in the near infrared region in beech (<Emphasis Type="Italic">Fagus crenata</Emphasis>) and pine (<Emphasis Type="Italic">Pinus densiflora</Emphasis>) litters at the various decomposing stages

We examined the relationships between the absorptional characteristics in the near infrared region and the chemical changes of decomposing beech (Fagus crenata) and pine (Pinus densiflora) litters. Spectra as well as the concentrations of chemical substances approached each other and converged with decomposition, although both initial characteristics differed markedly between beech and pine. This indicated that the fundamental chemical structures were almost the same, although their organochemical composition differed. Specific absorption bands for lignin, polysaccharide, and protein were identified at 2,140 and 1,670 nm, 2,270, 1,720, 1,590, and 1,216 nm, and 2,350 nm, respectively. Absorbance at 1,670 nm, peculiar band of aromatics, showed a positive correlation with lignin concentration, which suggested the relative increment of aromatics due to condensed lignin in decomposing litters. Absorbance at 2,140 nm, characterized as the C–H bond in HRC = CHR, showed a negative correlation with lignin concentration, which suggested the decrements of some structures such as side-chains in lignin polymers unrelated to aromatics. Absorbance at 2,270, 1,720, and 1,216 nm, specified to O–H/C–O/C–H bonds in saccharide, might reflect the change of polysaccharide during decomposition because they showed a positive correlation to polysaccharide concentration. In the same way, absorbance at 2,350 nm, identified to the C–H/CH₂ bonds in protein, showed a negative correlation to nitrogen concentration in decomposing litters, which might indicate that the C–H/CH₂ bonds in protein decreased with decomposition due to microbial consumption of carbon in protein. Our findings suggested the possibility that the spectral changes indicate the litter digestibility during decomposition and that also explain the compositional change in decomposing litters.     

Predicting individual stem volumes of sugi (Cryptomeria japonica D. Don) plantations in mountainous areas using small-footprint airborne LiDAR

This study investigated which predictor variables with respect to crown properties, derived from small-footprint airborne light detection and ranging (LiDAR) data, together with LiDAR-derived tree height, could be useful in regression models to predict individual stem volumes. Comparisons were also made of the sum of predicted stem volumes for LiDAR-detected trees using the best regression model with field-measured total stem volumes for all trees within stands. The study area was a 48-year-old sugi (Cryptomeria japonica D. Don) plantation in mountainous forest. The topographies of the three stands with different stand characteristics analyzed in this study were steep slope (mean slope ± SD; 37.6° ± 5.8°), gentle slope (15.6° ± 3.7°), and gentle yet rough terrain (16.8° ± 7.8°). In the regression analysis, field-measured stem volumes were regressed against each of the six LiDAR-derived predictor variables with respect to crown properties, such as crown area, volume, and form, together with LiDAR-derived tree height. The model with sunny crown mantle volume (SCV) had the smallest standard error of the estimate obtained from the regression model in each stand. The standard errors (m³) were 0.144, 0.171, and 0.181, corresponding to 23.9%, 21.0%, and 20.6% of the average field-measured stem volume for detected trees in each of these stands, respectively. Furthermore, the sum of the individual stem volumes, predicted by regression models with SCV for the detected trees, occupied 83%–91% of field-measured total stem volumes within each stand, although 69%–86% of the total number of trees were correctly detected by a segmentation procedure using LiDAR data.     

Acorn dispersal and predation patterns of four tree species by wood mice in abandoned cut-over land

We compared patterns of acorn dispersal and predation by wood mice among four tree species (Quercus serrata, Quercus crispula, Castanea crenata, and Juglans mandshurica var. sieboldiana) that are abundant in cool temperate woodlands. We devised an acorn dispersal experiment using 400 magnet-inserted acorns and a magnetic locator in a 1.8-ha study plot, which spanned a cut-over area and an adjacent deciduous forest. Ten wire mesh baskets, each containing 40 acorns (10 acorns per species), were placed on the border between these two habitat types. About 13.0% (n = 52) of the total acorns remained in the baskets, while 77.3% (n = 309) were dispersed throughout the study plot and subsequently retrieved using the magnetic locator. Microhabitat, distance, and burial depth of transported acorns were significantly different among species. In the cut-over area, J. mandshurica var. sieboldiana acorns were dispersed under fallen trees or branches and near stumps, and were buried deeply in the soil. Dispersal distances of J. mandshurica var. sieboldiana acorns were significantly greater than those of Q. serrata acorns. The number and microhabitat of transported acorns significantly differed between habitat types. J. mandshurica var. sieboldiana acorns were dispersed in the cut-over area rather than in the forest. For all four species, the numbers of acorns delivered to fallen trees or branches, stumps, and crumbled soil with overhang under any vegetation type were greater in the cut-over area than in the forest.     

Estimating the production and mortality of fine roots in a Japanese cedar (Cryptomeria japonica D. Don) plantation using a minirhizotron technique

Fine roots are a key component of forested ecosystems, but available information is still limited. This study examined the production and mortality of fine roots less than 1 mm in diameter in a Japanese cedar (Cryptomeria japonica D. Don) plantation located on the Kanto Plain in central Japan. We used a minirhizotron technique in combination with soil coring, and collected data for 1 year (May 2002–May 2003). Fine root production and mortality were determined from changes in the lengths of individual fine roots on minirhizotron tubes. Both fine root production and mortality rates were greater in the upper soil than in lower soil levels. Both rates were seasonal, with higher values in summer than in winter; this trend was more pronounced in upper soil levels. These results suggest that environmental conditions, such as temperature or soil properties, affect the production and mortality rates of fine roots. Fine root production and mortality occurred simultaneously, and their rates were similar, which may have led to unclear seasonal changes in fine root standing crop estimates. Soil coring indicated that the fine root biomass of this stand was about 120 g m⁻², of which 40% was from Japanese cedar. The estimated rates of dry matter production and mortality of total fine roots, including understory plants, were both approximately 300 g m⁻² year⁻¹.     

Nickel-catalyzed carbonization of wood for coproduction of functional carbon and fluid fuels I: production of crystallized mesoporous carbon

Japanese larch wood loaded with nickel (1%–4%) alone or with nickel and calcium (0.25%–1.5%) was carbonized at 800°–900°C for 0–120min with a heating rate of 5°–20°C min⁻¹ in a helium flow of 5.8−46.4 ml STP cm⁻² min⁻¹ to examine the influence of these variables on the crystallization of carbon (the formation of T component) and the development of mesoporosity. From the obtained results, reaction conditions suitable for effective production of carbon with the dual functions of adequate electroconductivity and adsorption capacity in liquid phase were established, thereby explaining the factors that govern the process. It was also confirmed that mesopore having a diameter of about 4 nm was selectively produced at the cost of specific (BET) surface area in parallel with the formation of T component. This result provided good insight into how the simultaneous dual function could be realized.     

Fundamental studies on wood/cellulose-plastic composites: effects of composition and cellulose dimension on the properties of cellulose/PP composite

Although wood/cellulose-plastic composites (WPC) of low wood/cellulose content have been more accepted worldwide and are promoted as low-maintenance, high-durability building products, composites containing high wood/cellulose content are not yet developed on an industrial scale. In this study, flow properties, mechanical properties, and water absorption properties of the compounds of cellulose microfiber/polypropylene (PP) and maleic anhydride-grafted polypropylene (MAPP) were investigated to understand effects of the high cellulose content and the dimensions of the cellulose microfiber. The molding processes studied included compression, injection, and extrusion. It was found that fluidity is not only dependent on resin content but also on the dimension of the filler; fluidity of the compound declined with increased fiber length with the same resin content. Dispersion of the composite was monitored by charge-coupled device (CCD) microscope. Increasing the plastic content in the cellulose-plastic formulation improved the strength of mold in addition to the bond development between resin and filler, and the tangle of fibers. The processing mode affected the physicomechanical properties of the cellulosic plastic. Compression-molded samples exhibited the lowest modulus of rupture (MOR) and modulus of elasticity (MOE) and the highest water absorption, while samples that were injection-molded exhibited the highest MOR (70 MPa) and MOE (7 GPa) and low water absorption (2%).     

Predictive modes of action of pesticides in uterine adenocarcinoma development in rats

Endometrial adenocarcinoma in the uterine corpus is a malignant cancer that occurs in menopausal women and aged rodents. Because of the similarities in pathogenesis and morphology of endometrial adenocarcinoma in rodents and humans, prediction of the modes of action (MOA) in uterine carcinogenesis is important for extrapolation of rodent data to humans. Three MOAs have been accepted as major pathways for uterine carcinogenesis in rodents: 1) estrogenic activity, 2) increased serum 17beta-estradiiol (E2) to progesterone (P4) ratio and 3) modulation of estrogen metabolism to produce 4-hydroxyestradiol via P450 induction. Inhibition of estrogen excretion and increased aromatase in situ in the tumor are also a potential pathway. Here, chemicals showing uterine carcinogenicity were chosen from approximately 300 pesticides evaluated in Japan within the past decade, and their mechanisms were predicted using parameters from mechanistic and toxicity studies. Seven pesticides increased uterine tumor formation in rats, and the pathways of 4 pesticides could be predicted based on various mechanistic studies. The MOAs of cyenopyrafen and benthiavalicarb-isopropyl were predicted to be modulation of estrogen metabolism, while those of pyriminobac-methyl and spirodiclofen were predicted to be increased E2 to P4 ratio. The driven pathways of metazosulfuron and isopyrazam could not be predicted using several mechanistic studies. No mechanistic studies have been reported for sedaxane, which has a chemical structure and toxicological profile similar to isopyrazam. Our results indicated that appropriate mechanistic studies are useful for mechanism prediction in risk assessment. From this analysis, a flowchart showing a decision tree for predictive MOAs in uterine carcinogenesis was proposed.     

Plasma fluctuation in estradiol-17β and bone resorption markers around parturition in dairy cows

Blood samples were obtained sequentially from 10 dairy cows around the time of parturition to assess plasma fluctuations in estradiol-17β (E₂) levels in association with those of several bone resorption markers. Plasma E₂ concentration increased sharply a few days prepartum and decreased quickly after parturition. In terms of bone resorption markers, the plasma level of tartrate-resistant acid phosphatase isoform 5b (TRAP5b) rose significantly, commencing 1 week prepartum, and was maintained at this level to a few days postpartum. The plasma concentration of carboxyterminal collagen cross-links of type-I collagen (CTx) increased significantly after parturition. These observations suggest that osteoclast-mediated bone resorption was activated after parturition when plasma E₂ concentrations decreased.     

Genetic variants of the unsaturated fatty acid receptor GPR120 relating to obesity in dogs

G protein-coupled receptor (GPR) 120 is an unsaturated fatty acid receptor, which is associated with various physiological functions. It is reported that the genetic variant of GPR120, p.Arg270His, is detected more in obese people, and this genetic variation functionally relates to obesity in humans. Obesity is a common nutritional disorder also in dogs, but the genetic factors have not ever been identified in dogs. In this study, we investigated the molecular structure of canine GPR120 and searched for candidate genetic variants which may relate to obesity in dogs. Canine GPR120 was highly homologous to those of other species, and seven transmembrane domains and two N-glycosylation sites were conserved. GPR120 mRNA was expressed in lung, jejunum, ileum, colon, hypothalamus, hippocampus, spinal cord, bone marrow, dermis and white adipose tissues in dogs, as those in mice and humans. Genetic variants of GPR120 were explored in client-owned 141 dogs, resulting in that 5 synonymous and 4 non-synonymous variants were found. The variant c.595C>A (p.Pro199Thr) was found in 40 dogs, and the gene frequency was significantly higher in dogs with higher body condition scores, i.e. 0.320 in BCS4–5 dogs, 0.175 in BCS3 dogs and 0.000 in BCS2 dogs. We conclude that c.595C>A (p.Pro199Thr) is a candidate variant relating to obesity, which may be helpful for nutritional management of dogs.