Sublethal effects of nine insecticides on Drosophila suzukii and its major pupal parasitoid Trichopria drosophilae

Background

Although the pupal parasitoid Trichopria drosophilae is used in conservative and augmentative biocontrol of Drosophila suzukii infestations, current pest management strategies mostly rely on multiple insecticide applications. In this context, the aim of the study was to investigate the baseline toxicity of nine insecticides on D. suzukii larvae and their multiple sublethal effects (LC₁₀) on immature stages of the pest feeding on contaminated diet and T. drosophilae developing within the intoxicated host.

Results

Chlorpyriphos and azadirachtin showed the lowest and the highest LC₁₀, the values of which were 9.78 × 10¹³ and 1.46 × 10³ times lower than their recommended label field rate, respectively. Among tested insecticides, imidacloprid, malathion and dimethoate were the only treatments that did not affect the juvenile development time of D. suzukii, while spinosad and the organophosphates chlorpyriphos and dimethoate did not influence fly pupal size. No sublethal effects were recorded on T. drosophilae degree of infestation (DI) and juvenile development time. On the contrary, cyazypyr and dimethoate negatively affected the success of parasitism (SP) and the number of progeny of the pupal parasitoid, in association with malathion for the first parameter and spinosad for the fertility. Compared to the untreated control, more female progeny emerged following azadirachtin exposure, while dimethoate caused the opposite effect. Imidacloprid, lambda-cyhalothrin and spinetoram decreased hind tibia length of emerged parasitoids.

Conclusion

This study provides new insights on the (eco)toxicological profile of nine insecticides and new information needed to support the deployment of T. drosophilae in the field within the sustainable management techniques against D. suzukii. © 2023 The Authors. Pest Management Science published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.     

Using midday stem water potential for scheduling deficit irrigation in mid–late maturing peach trees under Mediterranean conditions

Irrigation techniques that reduce water applications are increasingly applied in areas with scarce water resources. In this study, the effect of two regulated deficit irrigation (RDI) strategies on peach [Prunus persica (L.) Batsch cv. “Catherine”] performance was studied over three growing seasons. The experimental site was located in Murcia (SE Spain), a Mediterranean region. Two RDI strategies (restricting water applications at stage II of fruit development and postharvest) based on stem water potential (Ψ_s) thresholds (?1.5 and ?1.8 MPa during fruit growth and ?1.5 and ?2.0 MPa during postharvest) were compared to a fully irrigated control. Soil water content (θ_v), Ψ_s, gas exchange parameters, vegetative growth, crop load, yield and fruit quality were determined. RDI treatments showed significantly lower values of θ_v and Ψ_s than control trees when irrigation water was restricted, causing reductions in stomatal conductance and photosynthesis rates. Vegetative growth was reduced by RDI, as lower shoot lengths and pruning weights were observed under those treatments when compared to control. However, fruit size and yield were unaffected, and fruit quality was slightly improved by RDI. Water savings from 43 to 65 % were achieved depending on the year and the RDI strategy, and no negative carryover effect was detected during the study period. In conclusion, RDI strategies using Ψ_s thresholds for scheduling irrigation in mid–late maturing peach trees under Mediterranean conditions are viable options to save water without compromising yield and even improving fruit quality.     

Measured and estimated water use and crop coefficients of grapevines trained to overhead trellis systems in California’s San Joaquin Valley

The use of overhead trellis systems for the production of dry-on-vine (DOV) raisins and table grapes in California is expanding. Studies were conducted from 2006 to 2009 using Thompson Seedless grapevines grown in a weighing lysimeter trained to an overhead arbor trellis and farmed as DOV raisins for the first two years and for use as table grapes thereafter. Maximum canopy coverage for the two lysimeter vines across years was in excess of 80 %. Seasonal (15 March–31 October) evapotranspiration for the lysimeter vines (ET_Lys) was 952 mm in 2007 (farmed as DOV raisins) and 943 and 952 mm (when farmed as table grapes). The maximum crop coefficient (K _cLys) across all 4 years ranged from 1.3 to 1.4. These maximum values were similar to those estimated using the relationship where K _c is a function of the amount of shaded area measured beneath the canopy at solar noon (K _c = 0.017 × percent shaded area). Covering the lysimeter’s soil surface with plastic (and then removing it) numerous times during the 2009 growing season (1 June–14 September) reduced ET_Lys from an average of 6.4 to 5.6 mm day^?1 and the K _c from 1.07 to 0.93. A seasonal basal K _c (K _cb) was calculated for grapevines using an overhead trellis system with a 13 % reduction in the K _cLys across the growing season.     

Crop response of drought-tolerant and conventional maize hybrids in a semiarid environment

In the High Plains, corn (Zea mays L.) is an important commodity for livestock feed. However, limited water resources and drought conditions continue to hinder corn production. Drought-tolerant (DT) corn hybrids could help maintain high yields under water-limited conditions, though consistent response of such hybrids is unverified. In this two-year study, the effects of three irrigation treatments were investigated for a DT and conventional maize hybrid, Pioneer AQUAMax P0876HR and Pioneer 33Y75, respectively. In 2013, the drier of the 2 years, irrigation amounts and crop water use (ET_c) were greater for the conventional hybrid, but grain water use efficiency (WUE) and harvest index were significantly greater for the DT hybrid. In 2014, grain yields and WUE were not significantly different between hybrids. However, irrigation amounts, ET_c and biomass yields were greater for the conventional hybrid. Results from both years indicate that the DT hybrid required less water to maximize grain yield as compared to the conventional hybrid. Producing relatively high yields with reduced amounts of water may provide a means for producers to continue corn production in a semiarid environment with declining water supplies.     

Modeling soil water dynamics in a drip-irrigated intercropping field under plastic mulch

Intercropping, drip irrigation, and the use of plastic mulch are important management practices, which can, when utilized simultaneously, increase crop production and save irrigation water. Investigating soil water dynamics in the root zone of the intercropping field under such conditions is essential in order to understand the combined effects of these practices and to promote their wider use. However, not much work has been done to investigate soil water dynamics in the root zone of drip-irrigated, strip intercropping fields under plastic mulch. Three field experiments with different irrigation treatments (high T1, moderate T2, and low T3) were conducted to evaluate soil water contents (SWC) at different locations, for different irrigation treatments, and with respect to dripper lines and plants (corn and tomatoes). Experimental data were then used to calibrate the HYDRUS (2D/3D) model. Comparison between experimental data and model simulations showed that HYDRUS (2D/3D) described different irrigation events and SWC in the root zone well, with average relative errors of 10.8, 9.5, and 11.6 % for irrigation treatments T1, T2, and T3, respectively, and with corresponding root mean square errors of 0.043, 0.035, and 0.040 cm³ cm^?3, respectively. The results showed that the SWC in the shallow root zone (0–40 cm) was lower under non-mulched locations than under mulched locations, irrespective of the irrigation treatment, while no significant differences in the SWC were observed in the deeper root zone (40–100 cm). The SWC in the shallow root zone was significantly higher for the high irrigation treatment (T1) than for the low irrigation treatment, while, again, no differences were observed in the deeper root zone. Simulations of two-dimensional SWC distributions revealed that the low irrigation treatment (T3) produced serious severe water stress (with SWCs near the wilting point) in the 30–40 cm part of the root zone, and that using separate drip emitter lines for each crop is well suited for producing the optimal soil water distribution pattern in the root zone of the intercropping field. The results of this study can be very useful in designing an optimal irrigation plan for intercropped fields.     

Sensitivity analysis of optimal operation of irrigation supply systems with water quality considerations

A model for optimal operation of water supply/irrigation systems of various water quality sources, with treatment plants, multiple water quality conservative factors, and dilution junctions is presented. The objective function includes water cost at the sources, water conveyance costs which account for the hydraulics of the network indirectly, water treatment cost, and yield reduction costs of irrigated crops due to irrigation with poor quality water. The model can be used for systems with supply by canals as well as pipes, which serve both drinking water demands of urban/rural consumers and field irrigation requirements. The general nonlinear optimization problem has been simplified by decomposing it to a problem with linear constraints and nonlinear objective function. This problem is solved using the projected gradient method. The method is demonstrated for a regional water supply system in southern Israel that contains 39 pipes, 37 nodes, 11 sources, 10 agricultural consumers, and 4 domestic consumers. The optimal operation solution is described by discharge and salinity values for all pipes of the network. Sensitivity of the optimal solution to changes in the parameters is examined. The solution was found to be sensitive to the upper limit on drinking water quality, with total cost being reduced by 5% as the upper limit increases from 260 to 600 mg Cl l^–1. The effect of income from unit crop yield is more pronounced. An increase of income by a factor of 20 results in an increase of the total cost by a factor of 3, thus encouraging more use of fresh water as long as the marginal cost of water supply is smaller than the marginal decrease in yield loss. The effect of conveyance cost becomes more pronounced as its cost increases. An increase by a factor of 100 results in an increase of the total cost by about 14%. The network studied has a long pipe that connects two distinct parts of the network and permits the supply of fresh water from one part to the other. Increasing the maximum permitted discharge in this pipe from 0 to 200 m³ h^–1 reduces the total cost by 11%. Increasing the maximum discharge at one of the sources from 90 to 300 m³ h^–1 reduces the total cost by about 8%.     

“WaterMan”: an on-farm water management game with heuristic capabilities

A modern computer-based simulation tool (WaterMan) in the form of a game for on-farm water management was developed for application in training events for farmers, students, and irrigators. The WaterMan game utilizes an interactive framework, thereby allowing the user to develop scenarios and test alternatives in a convenient, risk-free environment. It includes a comprehensive soil water and salt balance calculation algorithm. It also employs heuristic capabilities for modeling all of the important aspects of on-farm water management, and to provide quantitative performance evaluations and practical water management advice to the trainees. Random events (both favorable and unfavorable) and different strategic decisions are included in the game for more realism and to provide an appropriate level of challenge according to player performance. Thus, the ability to anticipate the player skill level, and to reply with random events appropriate to the anticipated level, is provided by the heuristic capabilities used in the software. These heuristic features were developed based on a combination of two artificial intelligence approaches: (1) a pattern recognition approach and (2) reinforcement learning based on a Markov decision processes approach, specifically the Q-learning method. These two approaches were combined in a new way to account for the difference in the effect of actions taken by the player and action taken by the system in the game world. The reward function for the Q-learning method was modified to reflect the suggested classification of the WaterMan game as what is referred to as a partially competitive and partially cooperative game.     

Testing and statistical analysis of the performance of a pipe drainage system: A case study in north-eastern Italy

A survey program was carried out from June 1988 to august 1989 in North-eastern Italy in a pipe drainage area of 61 ha in order to verify if the year of installation (one part of the system has been installed in 1984 and another one year later) and the cover material of drains (pipes were covered with cocofibre for 2/5 of their length and without envelope for 3/5) could influence the functioning of the system. Collected data of drain discharge and water table depth were subjected to an elaborate statistical analysis.A methodological approach to determine the sample size (how many measurements of discharge and watertable depth are required, in space and time, from a statistical stand-point) in drainage experiment is proposed. For drainage systems similar to the considered one, a sample size of 10–12 drains and 6–8 observation wells can be recommended in order to obtain a standard error lower than 10–15% of the mean.     

Habitat quality,not habitat amount,drives mammalian habitat use in the Brazilian Pantanal

Landscape Ecology - An understanding of species-habitat relationships is required to assess the impacts of habitat fragmentation and degradation. To date, habitat modeling in fragmented landscapes...     

A two-year comparison on nutritive value and yield of eight lucerne cultivars and one red clover cultivar

Red clover (Trifolium pratense) and lucerne (Medicago sativa) are among the most common legume species used for ruminant feeding systems. Besides the greater nutritive quality and first-year ley yield compared to lucerne, red clover decreases its yield over the years. However, under unfavourable soil conditions the persistency of lucerne can be compromised, not performing as expected. This study compared yield and chemical composition of eight lucerne cultivars and one tetraploid red clover cultivar, with similar growth capacity as lucerne, replicated over two years. In the second year, four lucerne cultivars and the red clover cultivar were analysed for crude protein (CP) fractions, dry matter and neutral detergent fibre (NDF) digestibility. A randomized block design was used with three field blocks per cultivar for the multiple comparisons within each year. There were differences in DM yield, concentrations of CP and NDF and CP fractions among the lucerne cultivars, but the differences were inconsistent between years and between growth cycles within year. The red clover cultivar had lower CP and NDF concentrations than a majority of the lucerne cultivars, and greater in vitro organic matter digestibility compared to all of the lucerne cultivars. Also, the red clover cultivar had greater rumen undegradable-to-degradable CP ratio but confirmed its lower yield persistency compared to the lucerne cultivars.