The influences of ambient temperature and crude protein levels on performance and serum biochemical parameters in broilers

This study was undertaken to investigate the effects of ambient temperature, crude protein levels and their interaction on performance and serum biochemical parameters of broiler chickens. A total of 216 Arbor Acre broiler chickens (108 males and 108 females) were used in a 2 × 3 factorial arrangement and randomly reared at two temperatures (normal temperature: 23 °C; daily cyclic high temperature: 28–32 °C) and fed on three diets with different crude protein levels (153.3, 183.3 or 213.3 g/kg, with constant essential amino acids) from 28 to 42 days of age. Daily cyclic high ambient temperature decreased final body weight, average daily weight gain, average daily feed intake and serum total protein contents (p < 0.001, p < 0.001, p < 0.001, p = 0.008 respectively), but increased feed/gain, mortality, respiratory rate, rectal temperature, serum uric acid contents and serum creatine kinase activity (p = 0.008, p = 0.003, p < 0.0001, p < 0.0001, p < 0.0001, p = 0.003 respectively), irrespective of crude protein levels. At the ambient temperature, reducing crude protein levels resulted in an increase in feed/gain (p < 0.001), but a decrease in serum total protein and uric acid contents. Only serum creatine kinase activity in broiler chickens was interacted by daily cyclic high ambient temperature and dietary crude protein levels (p = 0.003). These results indicated that daily cyclic high ambient temperature had a great effect on performance and serum biochemical parameters in broiler chickens, whereas dietary crude protein levels affected them partially.     

宁夏压砂地土壤全盐量和pH值的空间变异分析

以宁夏境内压砂地为研究对象,研究了不同土层压砂地土壤全盐量和pH值的空间变异性。结果表明:描述性统计分析,在垂直方向上,pH值随土壤深度的增加而下降,每层土样pH值的变异系数变化均10%,属弱变异性;全盐量随着土样深度的增加而增加,变异系数均100%,属强空间变异性。各层pH值理论分布模型均为高斯模型,且具有中等程度的空间相关性,反映出压砂地土壤pH值的空间变异是随机性因素和结构性因素共同作用的结果;0~20、20~40cm全盐理论分布模型为高斯模型,40~60cm属球状模型,具有强烈的空间相关性,说明其变异主要是由结构性因素引起。Kriging插值分析表明研究区土壤全盐量和pH值在水平空间分布总体呈环状,pH值由西北向东南方向逐渐降低,全盐量由西北向东南方向递增。     

基于GIS的城市绿地系统景观生态评价

以哈尔滨市群力新区绿地系统为研究对象,在遥感和GIS技术支持下,从绿地类型的基本斑块特征、斑块类型等级、景观异质性及景观破碎化4个层面上选取14个指数,对群力新区绿地景观格局进行分析。结果表明:研究区绿地率低,各类型绿地斑块数分布失衡,面积差异较大,形状复杂程度各异。景观多样性较好,优势度明显,但缺失绿地类型,且分布不均匀,破碎化水平较高。针对研究区绿地景观格局中存在的问题,提出群力新区绿地生态规划建议,使研究区绿地系统具有良好的景观格局,更有效的发挥城市绿地的生态功能。     

光质和光强对红树莓组培苗叶绿素荧光参数的影响

为了确立红树莓组培苗生长的适宜光质和光强,以红树莓"海尔特兹"组培苗为试材,研究了不同光质和光强处理下红树莓生根组培苗的叶绿素含量及叶绿素荧光参数。结果表明:光质处理中,除R/B(红光∶蓝光=1∶1)处理外,Chl a(叶绿素a)、Chl b(叶绿素b)和Ct(叶绿素总含量)均随着R/B比率的增加呈现先增加后减小的趋势,Chl a和Ct均在2R/B(红光∶蓝光=2∶1)处理下呈现最大值,分别为1.344、1.716mg·g~(-1),Chl b则在R/2B(红光∶蓝光=1∶2)处理最高,为0.423mg·g~(-1),Chl a、Chl b和Ct均以10R/B(红光∶蓝光=10∶1)处理最低,分别为0.130、0.033、0.163mg·g~(-1),均显著低于其它光质;Chl a/b(叶绿素a/b)在10R/B、2R/B和R/B处理下较高,分别为3.942、3.709、3.653,呈现阳生植物的特性,而在6R/B(红光∶蓝光=6∶1)、W(白光)、4R/B(红光∶蓝光=4∶1)等处理下较低,分别为2.729、2.730、2.747,呈现阴生植物的特性;在R/2B处理下,红树莓组培苗叶片的叶绿素荧光参数值表现极优,Fv/Fm(PSⅡ最大光化学效率)值达到0.881,而10R/B处理下,Fv/Fm值降低到0.355,且显著低于其它光质处理;光强处理中,随着光强的增加,Chl a、Chl b和Ct呈现递减的趋势,最大值由1.218、0.503、1.720mg·g~(-1)分别降低到0.907、0.302、1.209mg·g~(-1),均形成显著差异,Chl a/b则表现为随着光强的增加而增加,在2 000lx处理达到最大值,为3.042,且3种光强处理差异显著;叶片的Fo(初始荧光)随着光强的增加而增加,在2 000lx处理下达到最大值,为180.000,Fm(最大荧光值)则在1 500lx处理下达到最大值,为907.000,而叶片的Fv/Fm、Fv/Fo(PSⅡ的潜在活性)、ΦPSⅡ(PSⅡ实际光化学效率)、Rfd(可变荧光下降比值)则均随着光强的增加呈现递减的趋势,均在1 000lx处理下呈现最大值,分别为0.847、5.573、0.815、4.200。     

不同品种芹菜品质指标测定及其聚类分析

以12个不同品种的芹菜为试材,对其可溶性糖、可溶性固形物、叶绿素、维生素C、硝酸盐、纤维素、蛋白质、氨基酸、微量元素、芹菜素含量等10个营养品质性状进行了测定,采用聚类分析对其进行比较。结果表明:不同品种的芹菜在营养品质方面不尽相同,其中"鲍芹"营养成分丰富,维生素C、芹菜素含量极高,适合食用。试验初步明确了各品种芹菜营养成分,为进一步开发芹菜的应用价值提供理论依据。     

不同树莓品种叶片解剖结构与抗旱性的关系

以树莓叶片为试材,分析了叶片的厚度气孔密度和表皮细胞、表皮毛、栅栏组织、海绵组织、保卫细胞等叶解剖结构,比较了不同树莓品种的抗旱性。结果表明:"凯欧"和"莎妮"的叶片最厚,"加拿大黑莓"次之,其次是"南方黑树莓""海尔特兹"的叶片最薄;"凯欧"的上下表皮、栅栏组织均最厚,其次是"莎妮""加拿大黑莓"和"南方黑树莓"居中,"海尔特兹"最薄;"凯欧"和"莎妮"的气孔密度均最大,"加拿大黑莓"和"南方黑树莓"居中,"海尔特兹"最小;隶属函数综合分析发现,5个树莓品种中"凯欧"的耐旱性最强,其次是"莎妮",再次是"南方黑树莓"和"加拿大黑莓";"海尔特兹"的耐旱性最弱。     

曲拉通和硝酸混合溶液直接提取快速测定草鱼中铅含量

为建立快速测定草鱼中铅含量的方法,通过分析曲拉通和硝酸混合溶液浓度、提取时间、称样定容体积比例等因素的影响,以及基体改进剂的使用效果,确定了草鱼中铅元素提取测定的最佳条件。验证结果显示：采用曲拉通和硝酸混合溶液提取草鱼中铅元素方法的提取率为86.5%～95.6%,加标回收率为91.5%～95.6%,精密度均小于4.0%,检出限和定量限分别为0.011和0.032 mg/kg,满足了国家标准GB 5009.12—2017第一法石墨炉原子吸收光谱法的要求。与国家标准方法比较,本研究建立方法的样品前处理时间从4～12 h缩短至0.2 h内,酸试剂用量从湿法消解的7～12 mL减少至1～2 mL;前处理过程无需高温消解,无需其他前处理设备,避免了样品污染和待测元素损失,实现了降低分析成本以及保护环境和试验人员的目的。结果表明,该方法是一种简单、准确、绿色、快速测定草鱼中铅含量的方法,尤其适合大量样品检测。     

ON STUDY DIGGED FIELD MOVEMENT''S LAW BY EXPERIMENTAL METHOD OF LASER HOLOGRAPHIC MOIRE INTERFERMETRY

The high-precision displacement measuring technology of optic-measuring mechanics is, for the first time,successfully applied on the similar model of the model land-layer with a new-type variable modulus of elasticity. The angle of movement and the distributed displacement of upper and lower rock-layers are measured. The technology is a combination of laser's technology and the modern chemical sticker-it is called the sticking moire interferometry. Compared with the measured values, the result is very satisfactory.     

Reuolution and Research of Green Automobile

The green is as a symbol of no pollution,no public harm and environmental protection. The green automobile is the inevitable results that the automobile technique continuously developes. A new style vehicle--the green automobile is the urgent solicit of environmental protection is developed. The automobile industry can develop continuously. This article mainly discusses the importance of the green auto_mobile's research and development,the development status in quo and prospect of the green auto_mobile technique in the world,and states the relationship between the green automobile technique and environmental protection from green technical system theoretically clarify the study of green automobile,including its design and the system,the manufacture and its technology,the energy,the rebuild engineering and a series of subjects. How to evaluate the cycle and the evaluable mark of the green automobile,the prospect of green automobile are pointed out.     

Dynamics of Actin Polymerization

The process of actin polymerization and depolymerization have some relation with its function,the activation of such process is compatible to its functions. The polymerization progress is divided into four steps: The first step is the activation of the monomer actin. The nucleation of actin nucleus forms in the second step which limits the polymerization speed. The elongation of the F-actin filaments happens in the following step. In the last step, a steady-state is attained, the length of the filament does not change because the polymerizing rate in the barbed end is the same with the depolymerizing rate in the pointed end. Some factors which affect the polymerizing process, such as nucleotide, actin related proteins are discussed. The aim is to know more about how to assemble the complicated system with biomacromolecule and what to function.