New winter oilseed rape varieties – seed quality and morphological traits depending on sowing date and rate

Many studies have focused on research about impact of time and density of sowing on the agronomic characteristics of different crops. However, the number of studies investigating such a response on the qualitative composition of different types of winter oilseed rape varieties is still limited. The aim of the research was to determine the effect of sowing date and density on yield, protein and oil content and quality of winter oilseed rape varieties: open-pollinated, a typical hybrid of traditional type of growth and a new semi-dwarf hybrid, which biology and yielding have not been thoroughly established. This experiment was conducted applying four sowing dates (August 14, August 25, September 4, September 15), three winter oilseed rape cultivars (PR45D03 -semi-dwarf hybrid, PR46W31 – hybrid, Californium – open-pollinated) and four sowing rates (30, 40, 50, 60 seeds/m²). Among the compared sowing dates, August 25 proved to be optimal for yielding of the tested winter oilseed rape cultivars. Semi-dwarf variety contained less protein and glucosinolate in seeds, but more oil in comparison to other studied varieties (hybrid and open-pollinated). The yields did not differ significantly within a density of 40, 50, 60 seeds/m², so it is important result, especially for the agricultural practice.     

Development and characterization of wheat lines with increased levels of arabinoxylan

Improving the nutritional quality and health benefits of food has been of increasing interest globally over the last decade. Staple cereal foods are the major sources of dietary fiber and a recent study identified the Chinese wheat cultivar Yumai-34 as having unusually high levels of water-extractable arabinoxylan (WE-AX) and total arabinoxylan (TOT-AX) in flour. Crosses were therefore made between this variety and three Central European varieties (Lupus, Mv-Mambo, Ukrainka) and the physical properties (test weight, thousand-kernel weight, flour yield, kernel hardness), composition (protein, gluten, WEAX, total AX) and processing quality (gluten index, Zeleny sedimentation, Farinograph parameters) of the grain were compared for thirty-one breeding lines (F₇–F₉) and the four parents in a 3-year field experiment (2013–2015). Increases of 0.5% in the WE-AX content and 1% in the content of total AX content of the flour were achieved, with an improvement in dough properties. The thousand-kernel weight, protein content, gluten content, Zeleny sedimentation and water absorption of the flour also increased in many lines, while three of the lines had yields that were competitive with the official control varieties, making them suitable for registration.     

Further spread of the gypsy moth fungal pathogen,Entomophaga maimaiga,to the west and north in Central Europe

Journal of Plant Diseases and Protection - The gypsy moth, Lymantria dispar, is one of the most important pests of deciduous trees in Europe, occurring in all environmental zones of Europe except...     

Dendroctonus micans populations on Picea pungens in the center of a non-outbreak region contain few pathogens,parasites or predators: A new threat for urban forests?

In reviewing the occurrence of the bark beetle Dendroctonus micans in the Czech Republic over the past 100 years, we found that D. micans has been detected at 80 localities with elevations ranging from 158 to 1350 m a.s.l. During 2011–2012, we recorded three local outbreaks on Picea pungens, two of which involved isolated trees in urban areas between houses (always on sites <1 ha). From these locally abundant populations, 125 adults, 5 pupae, and 73 larvae of D. micans were obtained and dissected. Among these dissected specimens, nematodes in the hemolymph were detected in only 5 adults and 11 larvae. No other parasites or pathogens were found in the D. micans specimens. Low numbers of the beetle Rhizophagus grandis, which is a specific predator of D. micans, were detected, and none contained parasites or pathogens. Locally D. micans could constitute a new limited threat to urban trees, including P. pungens, in the Czech Republic and Central Europe. Special attention should be given to solitary P. pungens trees; if D. micans is detected on these trees, defensive measures must be taken to protect uninfested trees in the vicinity.     

A Review of the Chemical Extraction of Chitosan from Shrimp Wastes and Prediction of Factors Affecting Chitosan Yield by Using an Artificial Neural Network

There are two viable options to produce shrimp shells as by-product waste, either within the shrimp production phases or when the shrimp are peeled before cooking by the end user. This waste is considered a double-edged sword, as it is possible to be either a source of environmental pollution, through dumping and burning, or a promising source from which to produce chitosan as a biodegradable, biocompatible biopolymer which has a variety of agricultural, industrial, and biomedical applications. Chitosan is a deacetylated form of chitin that can be chemically recovered from shrimp shells through the three sequential stages of demineralization, deproteinization, and deacetylation. The main aim of this review paper is to summarize the recent literature on the chemical extraction of chitosan from shrimp shells and to represent the physicochemical properties of chitosan extracted from shrimp shells in different articles, such as chitosan yield, moisture content, solubility, ash content, and degree of deacetylation. Another aim is to analyze the influence of the main predictors of the chemical extraction stages (demineralization, deproteinization, and deacetylation) on the chitosan yield percentage by using a multilayer perceptron artificial neural network. This study showed that the deacetylation alkali concentration is the most crucial parameter, followed by the concentrations of acid and alkali of demineralization and deproteinization, respectively. The current review was conducted to be used in prospective studies for optimizing the chemical extraction of chitosan from shrimp wastes.     

Visible and Near-Infrared Reflectance Spectroscopy for Assessment of Soil Properties in the Caucasus Mountains,Azerbaijan

ABSTRACT

This study aimed to predict soil properties using visible–near infrared (VIS-NIR) spectroscopy combined with partial least square regression (PLSR) modeling. Special emphasis was given to evaluating effect of pre-processing methods on prediction accuracy and important wavelengths. A total of 114 samples were collected and involved in chemical and spectral analyzes. PLSR model of each soil property was calibrated for all pre-processing methods using all samples, and leave-one-out cross-validation was used to make comparisons between them. Then, PLSR model of each best pre-processing method was calibrated using a 75% of all samples and correspondingly validated with the remaining a 25%. Model accuracy was evaluated based on coef?cient of determination (R²), root mean-squared errors (RMSE), and residual prediction deviations (RPD). The high correlation coefficients were found between the tested soil properties and reflectance spectra. The pre-processing methods considerably improved prediction accuracy and filtering methods outperformed linearization methods, and the latter outperformed normalization methods. The performance of cross-validation, calibration and independent validation was similar. An excellent prediction (RPD>2.5) model was obtained for soil organic carbon (SOC) and calcium-carbonate (CaCO₃), good quantitative (2.0< RPD<2.5) prediction for sand, silt, and clay, fair prediction (1.4< RPD<1.8) for pH, and poor prediction (1.0< RPD<1.4) for hygroscopic water content (WC). Important wavelengths varied depending on soil property, but some wavelengths were common. This study can be a precursor to building a pioneering soil spectral database, calibrating satellite data, and hyperspectral image mapping of soils as well as digital soil mapping, environmental, and erosion modeling in the Caucasus Mountains.     

Measurement of in situ Phosphorus Availability in Acidified Soils using Iron-Infused Resin

A hybrid anion resin was tested for in situ phosphorus (P) availability measurement in soils of two stands recovering from acidification and having different P-sorption characteristics. The phosphate (P-PO₄) sorption capacity of the resin (before saturation) was 48 µmol g^?1. Sorption and elution were tested under P-PO₄ concentrations common in acidic soils (0–0.42 mmol l^?1) either with or without the presence of sulfate (0.2 mmol l^?1). The efficiency of P-PO₄ sorption was independent of the sulfate and was 100 ± 0.2% (n = 56, ± SD). The P-PO₄ recovery stabilized after six elution steps (each: 50 ml of 0.5 M sodium hydroxide, resin/solution 5:1). The efficiency of P-PO₄ recovery was 80 ± 7% and was used to evaluate field measurements. We determined the amount of P-PO₄ in the field using resin bags in three consecutive years. The results indicate that bioavailable P is negatively related to the soil ability to retain P.     

Saproxylic beetles in natural and man-made deciduous high stumps retained for conservation

Intensive forest management in Scandinavia has decreased the amount of dead wood required by saproxylic (wood-living) organisms. To reduce this problem, some dead wood is now retained during forest operations, often in the form of man-made high stumps (ca. 4 m high). Most often these stumps are cut with a harvester, although the stumps in this study were made with explosives. The aims of this study were to determine whether such stumps of aspen (Populus tremula) and birch (Betula spp.) could be used by red-listed saproxylic beetles (Coleoptera), and to examine how the fauna of man-made high stumps differs from that of natural stumps. We also studied how tree species, sun-exposure, stage of decay and trunk diameter influenced the fauna. In 169 samples of bark from high stumps 116 saproxylic species were found, of which 21 were red-listed. Many species, including red-listed ones, were more associated with man-made stumps than with natural stumps. However, in total, more species were found in the natural than in the man-made stumps. This is probably because man-made stumps provide a more homogeneous type of wood substrate than natural ones. Among the other variables the difference between aspen and birch was the most important. We conclude that man-made high stumps are valuable habitats for many saproxylic beetle species.     

Paternity testing in an autotetraploid alfalfa breeding polycross

Determining unknown parentage in autotetraploid alfalfa (Medicago sativa L.) (2n = 4x = 32) can improve breeding gains. An exclusion analysis-based paternity testing SAS code, amenable to genotyping errors, is presented for autotetraploid species utilizing co-dominant molecular markers with ambiguous dosage. To demonstrate the paternity testing SAS code, 19 SSR loci were genotyped and analyzed on 1,107 progeny from a commercial, isolated, clonally replicated, 16-parent alfalfa breeding polycross which was pollinated by leafcutter bees (Megachile rotundata F.). Paternal assignment success rate was over 90 %. Among typed progeny, 45 % were the result of self-fertilization. Significant differences were detected between the 15 parents that produced seed and were observed as fathers for (1) total fertilizing pollen contribution (% deviation from expectation), (2) self-fertilization rates (%), and (3) outcrossing fertilizing pollen contribution (% deviation from expectation). Physical within-cage distance between parental plants was correlated with outcrossing fertilizing pollen frequency (negative power function). Parental seed yield was positively correlated with total fertilizing pollen contribution, particularly with self-fertilization rates (42 % self-fertilization and 17 % outcrossing). These correlations suggest that selecting for increased seed yield may result in indirect selection for increased self-fertilization rates. Parental total fertilizing pollen contribution was 62 % determined by outcrossing and 35 % by self-fertilization. This study cautions alfalfa breeders that heretofore unconsidered sources of inbreeding could be present in some breeding materials. This study also provides cost effective and easy to use molecular genetic tools for detecting, managing, and/or selecting against (through breeding) those sources of inbreeding.