野生老芒麦种质资源鉴定与基部叶鞘绒毛变异分析

为更好地利用老芒麦(Elymus sibiricus L.)野生资源,本研究从我国青藏高原、西北、华北、东北地区以及国外部分地区共采集了1 723份野生披碱草属种质资源,通过表型特征观测和流式细胞仪检测,共鉴定出了990份野生老芒麦种质,246份垂穗披碱草种质,并测得老芒麦的DNA含量在5.86～7.30 Gb之间,平均DNA含量为6.66 Gb;垂穗披碱草材料的DNA含量在9.50～10.36 Gb之间,平均DNA含量为9.97 Gb。研究结果显示,在西北、华北以及东北地区的部分野生老芒麦材料在苗期基部叶鞘出现了绒毛,分析发现该表型出现的概率与经度和纬度呈极显著正相关关系(P<0.01),与海拔、年年均气温以及年平均降雨量呈极显著负相关关系(P<0.01)。表明老芒麦苗期基部叶鞘绒毛的有无与环境因子之间存在着必然的联系,可能是老芒麦种质应对不同环境类型的适应性机制之一。本研究为老芒麦的形态鉴定提供了新的依据,为老芒麦种质资源挖掘和育种应用提供了材料基础。     

植物基因启动子的克隆方法及其应用

植物基因的表达调控已成为分子生物学研究热点,启动子是基因表达调控的重要顺式元件,启动子的克隆对于研究基因表达调控、构建基因工程载体、表达目的蛋白有着重要的意义。启动子克隆的方法很多,从常用的启动子陷阱技术筛选启动子到PCR方法的应用,此后相继问世的一些基于PCR的克隆启动子技术,如载体锚定PCR、反向PCR、接头PCR、交错热不对称PCR等,为克隆启动子提供了更可靠,更合理的方法。本文着重介绍了几种植物基因启动子的克隆方法,分析了它们的优缺点,并展望了今后的研究前景。     

Wavelet Edge Detection Method Based-on Multi-scale Fuzzy Logic

A novel edge detection algorithm is proposed by implementing fuzzy image enhancement at different scales.The implement of this algorithm can reduce the negative influence bring from the non-maximum suppression algorithm which select only one threshold.The success of the approach depends on the selection of a general fuzzy operator(GFO) for the enhancement of contrast of region after smoothing of image at different scales.Consequently,it is more obvious that coarse intensity changes are obtained at a large scale whereas the fine details of intensity changes are obtained at a small scale.A pretty performance is obtained by used this work.     

A Study on the FMS Planning and Scheduling System

After researching the function requirements of the planning and scheduling in manufacturing cells, the paper advanced a control structure with three phases, i. e. planning , scheduling and dispatching. The paper represented in detail the main purposes, requirements and scheduling actions in each phase. It suits to general machining FMSs.     

单株幼龄苹果树修剪仿真研究

修剪是果树生产中重要的技术手段,要想研究更加合理的修剪技术体系,就必须保证能够对修剪反应有准确、直观和及时的判断,而仿真模拟技术提供了这种可能。以幼龄苹果树为研究对象,采用不同修剪处理对比的方法,在田间试验的基础上,总结修剪反应规律,构建苹果树结构和修剪模型。在此基础上基于Qt框架和OpenGL图形库,开发了单株苹果树修剪仿真软件平台。结合优化算法,通过仿真平台模拟了给定生产目标的修剪方案优化,优化结果对虚拟学习和实际生产提供了可视化指导。     

Effect of soil matric potential on tomato yield and water use under drip irrigation condition

Field experiment was carried out to investigate the effect of soil matric potential (SMP) on tomato yield, evapotranspiration (ET), water use efficiency (WUE) and irrigation water use efficiency (IWUE) under drip irrigation condition in North China Plain. The experiment included five treatments, which controlled SMP at 0.2 m depth immediately under drip emitter higher than −10 (S1), −20 (S2), −30 (S3), −40 (S4) and −50 kPa (S5), respectively, after tomato plant establishment. The results showed that different SMP affected irrigation amount and tomato ET. Irrigation amount decreased from 185 mm (S1) to 83.6 mm (S5) in 2004, and from 165 mm (S1) to 109 mm (S5) in 2005, respectively. The ET decreased from 270 mm (S1) to 202 mm (S5) in both years. However, it was found that SMP did not affect the tomato yield significantly, for the range of SMP investigated. Both WUE and IWUE increased as SMP decreased. The maximum WUE (253 and 217 kg/ha mm) and IWUE (620 and 406 kg/ha mm) were for S5 in 2 years, whereas the minimum WUE (178 and 155 kg/ha mm) and IWUE 261 and 259 kg/ha mm) were for S1 in 2004 and 2005. Based on the above results, therefore, it is recommended that if the tomatoes are well irrigated (SMP is higher than −20 kPa) during establishment, controlling SMP higher than −50 kPa at 0.2 m depth immediately under drip emitter can be used as an indicator for drip irrigation scheduling during following period of tomato growth in North China Plain.     

苹果汁中展青霉素的去除动力学与热力学研究

利用Langmuir、Freundlich及Temkin吸附等温模型对LSA-800B型树脂吸附苹果汁中展青霉素的等温线数据进行拟合,确定较佳吸附模型,并且对吸附过程的热力学性质进行研究。此外,利用Lagergren拟一级、Mc Kay拟二级吸附速率模型和Weber-Morris颗粒内扩散模型对LSA-800B型树脂吸附苹果汁中展青霉素的静态吸附过程进行分析,确定较佳的吸附速率模型及吸附机理。结果表明:LSA-800B型树脂吸附苹果汁中展青霉素符合Freundlich吸附等温模型;吸附自由能变量ΔG0,证明LSA-800B型树脂对展青霉素的吸附是自发的物理过程;吸附焓变量ΔH0,说明吸附过程是放热过程,温度降低有利于展青霉素的吸附;吸附熵变量ΔS0,说明水分子不易对被吸附的展青霉素进行解析,解析过程需要其他溶剂;Lagergren拟一级吸附速率模型适合描述吸附过程的动力学,WeberMorris颗粒内扩散模型揭示其吸附过程由液膜扩散和颗粒内扩散共同控制。