大豆蛋白-多糖复合物结构与性能及其稳定性研究

以大豆分离蛋白（SPI）、阿拉伯树胶（GA）及卡拉胶（CA）为原料,经物理混合成功制备不同多糖与SPI复合物,考察不同添加量（SPI与GA/CA质量比为20、15、10、5）对蛋白-多糖复合物结构、性能变化趋势及其乳液稳定性的影响规律,最终探明蛋白与不同多糖复合物的相互作用机制;运用红外光谱、荧光光谱及电子显微镜解析不同复合物的结构特征,采用乳化特性、粒径、Zeta-电位、表面疏水性等指标明确不同复合物的理化特性,并通过探讨不同复合物乳液的乳化活性、乳化稳定性、表观粘度及乳析指数明晰其稳定特性。结果表明,两种多糖在酸性条件下可与SPI生成复合物,并且当SPI与CA质量比为20时,复合物的Zeta-电位最高,为（20.47±0.82） mV,平均粒径最小,为（1.37±0.01）μm,分布均匀,乳化活性指数最高,为（106.46±4.75） m²/g,乳化稳定性指数为（145.33±8.53） min,此时复合乳液的稳定性较好,CA的加入显著降低SPI内源荧光强度并改变SPI的二级结构,SPI与CA结合形成了稳定的复合物。     

Auswirkungen des Klimawandels auf die Verfügbarkeit von Kältewirkung (Chilling) für Obstgehölze in Deutschland

To quantify the effects of climate change on fruit production in Germany, this study aimed at determining long-term trends in winter chill, as calculated with the Chilling Hours and Dynamic Models (Chill Portions). An idealized daily temperature curve was used to convert daily temperature records from 43 weather stations, taken throughout the twentieth and late nineteenth centuries, into an hourly dataset, which was then converted to units of winter chill. Besides exposing temporal trends in winter chill, the data could be spatially interpolated, yielding contiguous maps of typical winter chill in Germany around 2010, as well as chilling losses since 1950. Throughout Germany, winter chill varied between 1700 and 3000 Chilling Hours or 125 and 150 Chill Portions. The areas of highest winter chill were located in the northern parts of the country. For the whole of Germany, there were no significant temporal trends. The extent of interregional variation in winter chill depended on the chilling model used. While the Chilling Hours Model showed strong declines in winter chill for the areas around Dresden and Leipzig, as well as for the Lake Constance region, the Dynamic Model did not detect such dramatic changes. More than a decline in winter chill, increased heat during the winter months might become a challenge to German fruit growers. As already experienced during the extraordinarily warm winter of 2006/07, warm temperatures during the winter can cause fruit trees that fulfill their chilling requirements relatively early to bloom prematurely. This can then lead to elevated risk of frost damage and hamper the homogeneity of flowering.     

Einfluss selektiver mechanischer Fruchtbehangsregulierung auf Ethylensynthese als Stressindikator sowie Ertrag und Fruchtqualität bei Kernobst

The overall objective of this work was to improve fruit quality, break alternate bearing and reduce hand thinning using fewer chemicals in fruit crops. A device was constructed for mechanical thinning, which consisted of three independent horizontal rotors with ropes and freely adjustable angles on a frame, mounted on a front three point hitch and powered by the tractor hydraulics. This can be adapted to any fruit tree trained as spindle, Solaxe, (tall) vertical axis or fruit wall (le mur fruitier) irrespective of rootstock employed. Rotor speed varied from 300 to 460?rpm at either 5 or 7.5?km/h tractor speed. Eight-year-old or twelve-old apple trees cvs. ‘Gala’ and ‘Golden Delicious’ were mechanically thinned in 2007 between pink bud and full bloom (flower bud stages 6–8 or F1–F2) near Bonn, Germany; non-thinned and hand-thinned apple trees of the same block and variety served as control. Mechanically thinned flowering branches showed a similar amount of ethylene efflux (0.4–0.6?ppm C₂H₄/branch) as non-thinned flower branches, preventing potentially unexpected subsequent fruit drop, except for those removed by the rotors. The impact of the horizontal rotors on the branches was from the upper side and removed excessive flowers right to the tree trunk viz. the centre of the tree canopy, where fruits of lesser quality are expected leaving 2–3 flowers per cluster. Leaf damage was less than??10%, even at the fast rotor speed of 420?rpm, which was associated with negligible wood injury. Mechanical thinning induced firmer and sweeter fruit, i.e. tastier apples with longer shelf life, relative to control fruit from non-thinned apple trees. The greatest efficacy in terms of final fruit quality in the grading/sorting was achieved by a rotor speed of 360?rpm at a tractor speed of 5?km/h: Fruit mass increased by up to 20?g and the proportion of fruit larger than 70–75?mm by 10–30% compared with the fruit from non-thinned trees. Mechanical thinning with this newly constructed device led to a 10–20% reduction in yield, but increased returns due to better fruit size and colouration in apple with the potential to overcome alternate bearing.     

Relating tradable credits for biodiversity to sustainability criteria in a dynamic landscape

Tradable biodiversity credit systems provide flexible means to resolve conflicts between development and conservation land-use options for habitats occupied by threatened or endangered species. We describe an approach to incorporate the influence of habitat fragmentation into the conservation value of tradable credits. Habitat fragmentation decreases gene flow, increases rates of genetic drift and inbreeding, and increases probabilities of patch extinction. Importantly, tradable credit systems will change the level of fragmentation over time for small and/or declining populations. We apply landscape equivalency analysis (LEA), a generalizable, landscape-scale accounting system that assigns conservation value to habitat patches based on patch contributions to abundance and genetic variance at landscape scales. By evaluating habitat trades using two models that vary the relationship between dispersal behaviors and landscape patterns, we show that LEA provides a novel method for limiting access to habitat at the landscape-scale, recognizing that the appropriate amount of migration needed to supplement patch recruitment and to offset drift and inbreeding will vary as landscape pattern changes over time. We also found that decisions based on probabilities of persistence alone would ignore changes in migration, genetic drift, and patch extinction that result from habitat trades. The general principle of LEA is that habitat patches traded should make at least equivalent contributions to rates of recruitment and migration estimated at a landscape scale. Traditional approaches for assessing the “take” and “jeopardy” standards under the Endangered Species Act based on changes in abundance and probability of persistence may be inadequate to prevent trades that increase fragmentation.     

Bahiagrass crop coefficients from eddy correlation measurements in central Florida

Bahiagrass (Paspalum notatum) is a warm-season grass used primarily in pastures and along highways and other low maintenance public areas in Florida. It is also used in landscapes to some extent because of its drought tolerance. Bahiagrass can survive under a range of moisture conditions from no irrigation to very wet conditions. Its well-watered consumptive use has not been reported previously. In this study, bahiagrass crop coefficients (K _c) for an irrigated pasture were determined for July 2003 through December 2006 in central Florida. The eddy correlation method was used to estimate crop evapotranspiration (ET_c) rates. The standardized reference evapotranspiration (ET_o) equation (ASCE-EWRI standardization of reference evapotranspiration task committee report, 2005) was applied to calculate ET_o values using on site weather data. Daily K _c values were estimated from the ratio of the measured ET_c and the calculated ET_o. The recommended K _c values for bahiagrass are 0.35 for January–February, 0.55 for March, 0.80 for April, 0.90 for May, 0.75 for June, 0.70 for July–August, 0.75 for September, 0.70 for October, 0.60 for November, and 0.45 for December in central Florida. The highest K _c value of 0.9 in May corresponded with maximum vapor pressure deficit conditions as well as cloud free conditions and the highest incoming solar radiation as compared to the rest of the year. During the summer (June to August), frequent precipitation events increased the cloud cover and reduced grass water use. The K _c annual trend was similar to estimated K _c values from another well-watered warm-season grass study in Florida.     

Tracking change in a human‐dominated landscape: developing conservation guidelines using freshwater fish

• 1. To conserve biodiversity in a human‐dominated landscape, a science‐based inventory and monitoring plan is needed that quantifies existing resources, isolates drivers that maintain natural communities, determines harmful stressors, and links ecological drivers and human stressors. A tactical approach is proposed for conservation planning using freshwater fish at the Cape Cod National Seashore.
• 2. Freshwater fish are well studied and occur across environmental gradients. The lentic systems at the national park are relatively pristine yet are enveloped by a region of high population density. Using fish community data, three steps were taken for tracking anthropogenic impacts in a human dominated landscape. First, fish and potential drivers were sampled intensively along a gradient to determine which fish metrics reflect natural communities and which abiotic and biotic factors structure them. Second, emerging and existing regional human threats were identified. Third, these human threats were linked to the potential drivers that maintain natural communities to identify the most informative metrics to monitor and track change.
• 3. Fish communities, water quality, habitat, and food resources were sampled concurrently in 18 ponds in 1999 and 2000. Three common fish species explained 98% of variation in numbers across systems. Based on ecological relationships, pH, depth, vegetation, prey, and community complexity were determined to maintain biodiversity of freshwater fish communities.
• 4. The primary human threats here included: development‐related, land‐use changes; non‐point source pollution; eutrophication from septic systems; and introduced species that are a byproduct of high human visitation. These are common threats in many rapidly urbanized areas and are likely to have relevance to many sites.
• 5. To track the impact of emerging threats to freshwater ponds related to increased human population, monitoring changes in water quality, vegetated habitat, fish diversity, and trophic interactions are recommended.

Copyright © 2008 John Wiley & Sons, Ltd.     

Effect of casein substitution with fishmeal, soybean meal and crustacean meal in the diet of the abalone Haliotis discus hannai Ino

The effect of dietary substitution of casein with fishmeal, soybean meal and crustacean meal on the growth of the abalone Haliotis discus hannai Ino was determined. A 350 g casein per kilogram diet was included into the CS diet. The whole casein was then substituted by: (1) 300 g fishmeal and 200 g soybean meal per kilogram diet (FS), (2) 200 g fishmeal, 200 g soybean meal and 130 g krill meal per kilogram diet (FSK), (3) 200 g fishmeal, 200 g soybean meal and 280 g red crab meal per kilogram diet (FSC) or (4) 200 g fishmeal, 200 g soybean meal and 130 g shrimp head meal per kilogram diet (FSS). In addition, a 50‐g by‐product of green tea per kilogram diet was included in the FS diet to form the FSG diet. Sea tangle (ST)diet was supplied to abalone as a control feed. Weight gain, final shell length and final shell width of abalone fed with the various substitution feeds (FS, FSK, FSC, FSS and FSG) were not different from those obtained with the CS diet. All the formulated feeds, however, produced higher weight gain and final shell width values than the ST diet. The results of this study show that casein can be replaced with a combination of fishmeal, soybean meal, krill meal, crab meal and/or shrimp head meal in the diet without a retardation of growth of abalone.     

Energy and resource consumption of land-based Atlantic salmon smolt hatcheries in the Pacific Northwest (USA)

This paper evaluates the resource and energy requirements of six different types of land-based, hatchery production systems located in the U.S. Pacific Northwest: flow-through with a gravity water supply, flow-through with a pumped water supply, flow-through with pure oxygen, partial reuse system, partial reuse with heating, and a reuse system for the production of Atlantic salmon (Salmo salar) smolts. Key parameters used in the evaluation include direct energy, indirect energy, transportation energy, greenhouse gas emissions, and pollutant discharges.Power (electricity and natural gas) and feed energy accounted for the majority of the required energy for all the rearing option evaluated. The sum of the fixed capital and chemicals components accounted for less than 2–12% of the total energy budget for any rearing option. The energy efficiency (energy output/energy input) of the six options ranges from 0.97% for flow-through with pumped supply to 3.49% for the flow-through with gravity supply. The rearing options with the three highest energy efficiencies were flow-through with gravity supply (3.49%), partial reuse (2.75%), and reuse (2.64%).On a kg of smolt produced basis, the six rearing options showed a wide range in performance. The reuse system had the lowest water (2 m³ kg^− 1) and land (0.13 m² kg^− 1) requirements and the third lowest total energy requirement (288 MJ kg^− 1). The partial reuse system had the second lowest total power requirement (276 MJ kg^− 1), a low land requirement (0.21 m² kg^− 1), and moderate water requirements (33 m³ kg^− 1). The partial reuse with temperature control had the second highest total power requirement (657 MJ kg^− 1) and land and water requirements similar to the partial reuse system without temperature control. The flow-through system with pumped water supply had the highest water (289 m³ kg^− 1), land (2.19 m² kg^− 1), and energy requirements (786 MJ kg^− 1) of any of the rearing options. By comparison, the flow-through system with gravity water supply had the lowest energy requirement (218 MJ kg^− 1), a moderate land requirement (0.78 m² kg^− 1), and a high water requirement (214 m³ kg^− 1). The ranking of the six rearing options based capital and operating costs are likely to be quite different from those based on energy, water, and greenhouse gas emissions.     

Large-scale deployment of a rice 6 K SNP array for genetics and breeding applications

Background

Fixed arrays of single nucleotide polymorphism (SNP) markers have advantages over reduced representation sequencing in their ease of data analysis, consistently higher call rates, and rapid turnaround times. A 6 K SNP array represents a cost-benefit “sweet spot” for routine genetics and breeding applications in rice. Selection of informative SNPs across species and subpopulations during chip design is essential to obtain useful polymorphism rates for target germplasm groups. This paper summarizes results from large-scale deployment of an Illumina 6 K SNP array for rice.

Results

Design of the Illumina Infinium 6 K SNP chip for rice, referred to as the Cornell_6K_Array_Infinium_Rice (C6AIR), includes 4429 SNPs from re-sequencing data and 1571 SNP markers from previous BeadXpress 384-SNP sets, selected based on polymorphism rate and allele frequency within and between target germplasm groups. Of the 6000 attempted bead types, 5274 passed Illumina’s production quality control. The C6AIR was widely deployed at the International Rice Research Institute (IRRI) for genetic diversity analysis, QTL mapping, and tracking introgressions and was intensively used at Cornell University for QTL analysis and developing libraries of interspecific chromosome segment substitution lines (CSSLs) between O. sativa and diverse accessions of O. rufipogon or O. meridionalis. Collectively, the array was used to genotype over 40,000 rice samples. A set of 4606 SNP markers was used to provide high quality data for O. sativa germplasm, while a slightly expanded set of 4940 SNPs was used for O. sativa X O. rufipogon populations. Biparental polymorphism rates were generally between 1900 and 2500 well-distributed SNP markers for indica x japonica or interspecific populations and between 1300 and 1500 markers for crosses within indica, while polymorphism rates were lower for pairwise crosses within U.S. tropical japonica germplasm. Recently, a second-generation array containing ~7000 SNP markers, referred to as the C7AIR, was designed by removing poor-performing SNPs from the C6AIR and adding markers selected to increase the utility of the array for elite tropical japonica material.

Conclusions

The C6AIR has been successfully used to generate rapid and high-quality genotype data for diverse genetics and breeding applications in rice, and provides the basis for an optimized design in the C7AIR.