Screening of extracts of Japanese woods for melanin biosynthesis inhibition

The effects of 120 methanol extracts prepared from bark and heartwood of 69 types of Japanese wood on the melanin production of B16 melanoma cells were examined. The melanin content of B16 melanoma cells was determined spectrophotometrically at 405nm. The extracts were also examined for their effects on cell viability. We found that the methanol extracts of Fagus crenata (buna, wood, 100μg/ml), Sapium sebiferum (Nankinhaze, wood, bark, 10μg/ml), and Zelkova serrata (keyaki, wood, 10μg/ml) greatly inhibited the melanin production of B16 melanoma cells without significant cytotoxicity. However, these extracts did not inhibit tyrosinase activity at the concentration of 100μg/ml. These findings indicate that the depigmenting mechanism of these extracts involves the suppression of some pigmenting signals in stimulating melanogenesis rather than the inhibition of tyrosinase activity. Part of this study was presented at the 53rd Annual Meeting of the Japan Wood Research Society, Fukuoka, Japan, March 2003     

Lignin-degrading activity of edible mushroom <Emphasis Type="Italic">Strobilurus ohshimae</Emphasis> that forms fruiting bodies on buried sugi (<Emphasis Type="Italic">Cryptomeria japonica</Emphasis>) twigs

Strobilurus ohshimae is an edible mushroom, and it specifically forms its fruiting bodies on buried sugi (Cryptomeria japonica) twigs. In this research, we studied lignindegrading activity of S. ohshimae. We isolated 18 strains of S. ohshimae from various regions of Japan, and determined their lignin degradation rates on sugi wood meal medium. All the strains of S. ohshimae degraded approximately 6%–12% of sugi lignin in 30 days, and these lignin degradation rates were 1.5–3 times higher than those of Trametes versicolor, which is a typical lignin-degrading fungus. Among the three main lignin-degrading enzymes, activity of lignin peroxidase and manganese peroxidase was not observed, while 4340U/g of laccase was produced in 30 days. To investigate the effect of wood species on lignin degradation by S. ohshimae, the lignin degradation rate and laccase productivity on sugi wood meal medium were compared with those on beech (Fagus crenata). In T. versicolor, both lignin degradation rate and laccase productivity were higher on beech than on sugi. Conversely, in S. ohshimae, lignin degradation rate and laccase productivity were higher on sugi than on beech. Therefore, it was suggested that coniferous lignin is not always difficult to degrade for the fungi that inhabit softwood. Part of this article presented at the 54th Annual Meeting of the Japan Wood Research Society, Sapporo, August 2004     

Ecosystem services from coffee agroforestry in Central America: estimation using the CAF2021 model

The goal of sustainable coffee production requires multiple functions from agroforestry systems. Many are difficult to quantify and data are lacking, hampering the choice of shade tree species and agronomic management. Process-based modelling may help quantify ecosystem services and disservices. We introduce and apply coffee agroforestry model CAF2021 (https://doi.org/10.5281/zenodo.5862195). The model allows for complex systems with up to three shade tree species. It simulates coffee yield, timber and fruit production by shade trees, soil loss in erosion, C-sequestration, N-fixation, -emission and -leaching. To calibrate the model, we used multivariate data from 32 different treatments applied in two long-term coffee agroforestry experiments in Costa Rica and Nicaragua. Without any further calibration, the model was then applied to agroforestry systems on 89 farms in Costa Rica and 79 in Guatemala where yields had been reported previously in farmer interviews. Despite wide variation in environmental and agronomic conditions, the model explained 36% of yield variation in Costa Rica but only 15% in Guatemala. Model analysis quantified trade-offs between yield and other ecosystem services as a function of fertilisation and shading.

     

Impacts of mixed litter decomposition from <Emphasis Type="Italic">Robinia pseudoacacia</Emphasis> and other tree species on C loss and nutrient release in the Loess Plateau of China

The productivity of Robinia pseudoacacia (R.p.) pure forest usually declines at the late growth stage, and reforming it into mixed forests could be a promising way to resolve this problem. When choosing a suitable tree species that can be mixed with R.p., the interspecific relationship is an important issue. Therefore, we gathered the autumn litter fall from R.p. and 10 other species from the Loess Plateau of China were mixed in dual species litterbags (R.p. + each other species) and buried them in soil for a 345 days lab decay incubation. We measured the litter mass loss and nutrient contents to determine whether the nutrient release was affected by mixed species litter decomposition. The impacts of mixed litter decomposition on macro-elements release were more obvious than on micro-elements. The litters with similar substrate quality might show variable impacts on nutrients release in mixed decomposition. The C loss and release of nutrient was improved by descending order when R.p. litter was mixed with Hippophae rhamnoides, Ulmus pumila, Populus simonii, Larix principis-rupprechtii and Quercus liaotungensis (Q.l.). But, except for Q.l., only the other species were recommended as suitable mix-plants for R.p. since promoting a high turnover of the nutrient in the litter compartment and a rapid availability for tree.     

中低强度间伐对杆材阶段马尾松林生物量的影响

对杆材阶段不同密度的马尾松林在低强度间伐后生物量的动态变化进行了分析对比，结果表明间伐后平均木的单株生物量和各器官生物量随密度增加而减少；随林分年龄的增加，单株生物量与树干、皮、根的生物量因积累而增大，但枝、叶的生物量先增加后减少，在林分年龄为20a时达到最大值，随后又接近间伐前的数值；林分生物量随年龄增加而增加，其中密度为3000株     

Cooperation in private forestry of post-soviet system: Forest owners’ cooperatives in Lithuania

The current state of cooperation in private forestry in Lithuania is examined, with a focus on the analysis of objectives, organisational structure and the ways forest owners’ cooperatives operate. A postal survey has been used as a main research instrument, the questionnaire consisting of a series of multiplechoice close-ended questions. This paper provides insights into the state forest enterprises and other private companies operating in the private forestry sector, and places forest owners’ cooperatives in a broader context of the private forestry sector. A typical forest owner’s cooperative in Lithuania has up to 10 members and about 20 clients to whom services are provided. The leaders of cooperatives indicate that the optimal number of clients using their services should not exceed 40. The main stated objectives of cooperatives are the provision of services to their members under the most attractive conditions, uniting members, and earning a profit for the members. These activities of cooperatives revolve around timber harvesting and trade. It is concluded that the process of cooperation of private forest owners in Lithuania is rather slow, although positive development can be observed.     

Fatigue of structural plywood under cyclic shear through thickness I: fatigue process and failure criterion based on strain energy

The fatigue behavior of plywood specimens under shear through thickness was examined on the basis of strain energy to obtain common empirical equations for the fatigue process and failure criterion under various loading conditions. Specimens were cut from commercial plywood panels of 9-mm thickness. Loading conditions were set as follows: a square waveform at a loading frequency of 0.5 Hz, a triangular waveform at 0.5 Hz, and a triangular waveform at 5.0 Hz. Peak stress applied was determined to be 0.5, 0.7, and 0.9 of static strength, that is, stress levels of 0.5, 0.7, and 0.9. The stress-strain relationships were measured throughout the fatigue test, and the strain energy was obtained at each loading cycle. Loading conditions apparently affected the relationship between stress level and fatigue life. On the other hand, the relationship between mean strain energy per cycle and fatigue life was found to be independent of loading conditions. Mean strain energy per cycle obtained as the fatigue limit was 5.85 kJ/m³ per cycle. Assuming that the accumulation of strain energy is a fatigue indicator, the fatigue process and failure criterion for the plywood specimens under the three loading conditions were commonly expressed by the relationship between cumulative strain energy and loading cycles.     

Three-dimensional imaging of a sawn surface: a comparison of confocal microscopy,scanning electron microscopy,and light microscopy combined with serial sectioning

The three-dimensional structure of a transverse sawn wood surface was investigated using several methods, to compare techniques, and to study the types of deformation in tracheids at the saw cut. A sample of spruce sapwood was cut with a fret saw across the grain. The transverse sawn surface was imaged by confocal microscopy, field emission scanning electron microscopy (FESEM), and by light microscopy combined with serial sectioning and three-dimensional (3D) reconstruction. Both confocal microscopy and FESEM were restricted to visualising the cut surface of the wood. However, serial sectioning was able to reveal the internal structure below the cut surface providing more information on the types of cell deformation present. The wood structure was deformed to depths of more than 600 μm below the surface with twisting, crushing and tearing deformations. Near the outer surface, gaps were formed between groups of tracheids where the cell walls had been torn away to form saw dust. The deformation tended to form groups of tracheids that were twisted relative to each other. Latewood was less distorted, forming a dense solid surface compared to the highly fibrous earlywood.     

Load behaviors of a prefabricated wood framing house during lifting and transportation

Lifting for handling and flatbed truck transportation to the job site are important processes during manufacture of prefabri-cated wooden construction units like mini homes and building modules. Significant damage can occur to sections or components of units during these operations. Although damage usually will not impair its structural safety, it is costly to fix and causes the public to perceive prefabricated wooden buildings as low quality products. Field observations and preliminary numerical models for prefabri-cated units subject to lifting and transportation forces are summarized here. Once fully developed and verified, models will support the creation of damage mitigation strategies centered on structural details indicating how units are to be supported during lifting and transportation.