基于ZigBee的寒地水稻温室大棚智能控制系统设计

针对我国北方寒地水稻育秧大棚的结构特点,设计并开发了一套基于ZigBee的智能控制系统,并构建了该系统的星型网络,用以实现将传感器采集到的数据进行无线传输的功能。系统进行数据采集的模块分别采用AT89S52单片机、数字式空气温湿度传感器DB420、数字式土壤温度传感器DS18B20和数字式土壤水分传感器SM2802M,用这些模块来监测空气中的温湿度、土壤温度以及土壤水分等,将监测到的数据通过JM12864F显示出来。这些采集模块还可以监测到大棚内的空气温湿度、土壤温度、土壤水分含量等实时信息,并对这些信息进行分析处理,将分析处理的结果发送到用户手中,达到远程监控的目的。     

水电站进水塔结构分析方案研究

水电站进水塔结构的安全直接关系到整个电站的安全和效益。采用三维有限元法分别建立了实体单元模型和梁单元与实体单元混合模型,开展了静、动力分析研究,对两种模型的计算结果进行了对比。结果表明,水电站进水塔采用两种模型计算的结果呈现出相同的规律。水电站进水塔结构分析可采用以实体单元模拟的成果作为结构分析的基础,在前部拦污栅框架部分的内力分析和配筋计算上以梁系与实体联合模拟的成果作为有效补充,为工程设计提供更为科学合理的参考依据。     

用于冬小麦组分信息检测的便携式LVF光谱仪研究

小麦是我国主要的粮食作物,能够实时准确地对小麦进行长势监测具有重要意义。为此,介绍了一种自主研发的便携式LVF光谱仪的软硬件结构,采集冬小麦冠层叶片光谱数据,利用偏最小二乘法建立了冬小麦组分信息的内嵌反演模型,使其成为可以测量冬小麦叶片组分信息的专用型光谱仪。同时,用校验集对预测模型进行验证,相关系数分别达到0.906和0.876。结果表明:便携式LVF光谱仪在冬小麦叶片组分信息的检测方面是可行性的。     

玉米播种机排种监测的试验研究与设计

在对目前玉米播种机排种监测方法的研究基础上,设计了一套新的玉米播种机排种监测的试验方法:将4对光电传感器并排安装在导种管内壁以监测空或堵的情况并进行报警;同时,利用安装在排种盘的中心轴上的空心转速编码器,测出排种盘转速连同试验所得的空穴率,从而得出玉米排种量。试验结果表明:该方案模拟实际空或堵的报警率达100%,排种量检测平均精度98.37%,各项性能指标均达到了实际要求。     

4LMZ160型履带式苎麻联合收割机的研究

分析了我国苎麻联合收割机现状及存在的问题,设计了适合我国苎麻主产区收获作业的履带式苎麻联合收割机,并对样机的关键部件进行了详细说明。该机一次可完成割幅160mm收割,整机转弯半径小,操作方便,对麻地高垄有较好适应性。其整机结构配置新颖独特,使用半喂入稻麦联合收获机底盘,采用全液压传动技术直接驱动苎麻收割机行走和机具作业,可一次性完成切割、输送、收集功能。田间性能测试结果表明:该机漏割率、割茬高度、作业小时生产率等各项性能指标均到达设计要求。     

我国蔬菜育苗产业现状及发展动态

蔬菜育苗是蔬菜生产中的关键环节之一,不仅可以节约用种量、增加复种指数,而且便于集约化管理,在我国有广阔的市场前景。为此,阐述了我国目前主要的几种育苗方法及相关技术,指出现阶段我国蔬菜育苗产业存在着育苗企业良莠不齐、缺乏规范化管理、育苗方法技术滞后和劳动者技术水平低等问题,并有针对性地提出了解决措施。目前,随着我国农业种植结构的调整,蔬菜育苗产业正向基质低廉化、育苗工厂化、育苗专业化及种苗标准化等方向发展。     

Evaluating and Comparing the Natural Cell Structure and Dimensions of Honey Bee Comb Cells of Chinese Bee,Apis cerana cerana (Hymenoptera: Apidae) and Italian Bee,Apis mellifera ligustica (Hymenoptera: Apidae)

The hexagonal structure of the honey bee comb cell has been the source of many studies attempting to understand its structure and function. In the storage area of the comb, only honey is stored and no brood is reared. We predicted that honey bees may construct different hexagonal cells for brood rearing and honey storage. We used quantitative analyses to evaluate the structure and function of the natural comb cell in the Chinese bee, Apis cerana cerana and the Italian bee, A. mellifera ligustica. We made cell molds using a crystal glue solution and measured the structure and inclination of cells. We found that the comb cells of A. c. cerana had both upward-sloping and downward-sloping cells; while the A. m. ligustica cells all tilted upwards. Interestingly, the cells did not conform to the regular hexagonal prism structure and showed irregular diameter sizes. In both species, comb cells also were differentiated into worker, drone and honey cells, differing in their diameter and depth. This study revealed unique differences in the structure and function of comb cells and showed that honey bees design their cells with precise engineering to increase storage capacity, and to create adequate growing room for their brood.     

Preparation and Identification of Canine Parvovirus NY Strain VP2 Protein Polyclonal Antibody

This study was aimed to prepare canine parvovirus (CPV) VP2 protein polyclonal antibody.The recombinant expression vector pET28a-CPV-VP2 was constructed and transfromed into E.coli BL21 (DE3),the expression of recombinant proteins was induced by IPTG from which the fusion protein was identified by SDS-PAGE.The target protein was purified and emulsify with adjuvant,the prepared immunogen was inoculated into rabbit by subcutaneous injections to prepare of VP2 protein specific polyclonal antibody.The immuno-activity,titers,neutralization titers of the prepared polyclonal antibody were determined by immunoperoxidase monolayer assay (IPMA).The results showed that the expressed recombinant protein VP2 (rVP2) existed in the form of inclusion body with a molecular weight of 72 ku.The prepared polyclonal antibody titer was 1 600 dilution,the virus titer was 10⁷ TCID₅₀/mL,the neutralizing titer was 1∶2 884.The antibodies showed specific reaction with CPV.In conclusion,rVP2 specific polyclonal antibody showed wonderful immunocompetence,specificity and neutralizing activity,providing foundation for the development of genetic vaccine and clinical therapeutic method.     

Effects of water‐misting sprays with forced ventilation on post mortem glycolysis,AMP‐activated protein kinase and meat quality of broilers after transport during summer

Effects of water‐misting sprays with forced ventilation on post mortem glycolysis, adenosine monophosphate‐activated protein kinase (AMPK) and meat quality of broilers after transport during summer were investigated in the present paper. A total of 105 mixed‐sex Arbor Acres broilers were divided into three treatment groups: (i) 45 min transport without rest (T); (ii) 45 min transport with 1 h rest (TR); and (iii) 45 min transport with 15 min water‐misting sprays with forced ventilation and 45 min rest (TWFR). Each treatment consisted of five replicates with seven birds each. The results indicated that the water‐misting sprays with forced ventilation could mitigate the stress caused by transport under high temperature conditions during summer, which reduced the energy depletion in post mortem Pectoralis major (PM) muscle. This resulted in a higher energy status compared to the T group, which would decrease the expression of phosphorylation of AMPK (p‐AMPK). Furthermore, decreased the expression of p‐AMPK then slowed down the rate of glycolysis in post mortem PM muscle during the early post mortem period, which in turn lessened the negative effects caused by transport on meat quality. In conclusion, water‐misting sprays with forced ventilation may be a better method to control the incidence of the pale, soft and exudative meat in broilers.     

Effect of urea supplementation on performance and safety in diets of Dorper crossbred sheep

This study was conducted to evaluate the efficacy and safety of dietary urea in sheep rations having a 50:50 concentrate:roughage ratio. Sixty‐four Dorper × thin‐tailed Han crossbred ram lambs with an average body weight of 30.8 (±0.02) kg were randomly divided into four groups of 16 sheep each, and each group was fed one of the following diets: a basal diet (CON), or CON supplemented with 0.5% (0.5UTM), 1.5% (1.5UTM) or 2.5% (2.5UTM) urea. Growth performance, carcass characteristics, non‐carcass offals, meat quality and peptic tissue lesions were assayed. The average daily weight gains for CON, 0.5UTM, 1.5UTM and 2.5UTM were 216, 218, 200 and 170 g, respectively, with the CON and 0.5UTM groups higher than 2.5UTM group (p < 0.05). Sheep from the 2.5UTM treatment had a significantly lower dry matter intake (1.29 kg/day) than those from the CON and 0.5UTM treatments (1.42 and 1.43 kg/day, p < 0.05), and the feed conversion ratio in the 2.5UTM group was the highest (p < 0.05). Carcass characteristics, including shrunk body weight, empty body weight, hot carcass weight, dress percentage, and the absolute or relative weight (% body weight) of heart, liver, spleen, lung and kidney, were not altered by the treatments (p > 0.05). The muscular pH of 2.5UTM was higher than that of CON (5.68 vs. 5.52, p < 0.05), and shear force in 0.5UTM was lower compared with CON and 2.5UTM (p < 0.05). The anatomical structure lesions in kidneys became more serious with the increasing dietary urea concentrations, with the 2.5UTM animals showing the most severe lesions compared with CON animals. Therefore, supplementary urea as a non‐protein nitrogen source for sheep should not exceed 1.5% of ration having a 50:50 concentrate:roughage ratio to ensure efficacy and safety.