Specific dynamic action in two body size groups of the southern catfish (<Emphasis Type="Italic">Silurus meridionalis</Emphasis>) fed diets differing in carbohydrate and lipid contents

Specific dynamic action (SDA), the energy costs associated with meal digestion and assimilation, is generally affected by body size and food composition. We assessed the postprandial metabolic response and calculated SDA in two size groups of the southern catfish (Silurus meridionalis), each fed one of two diets, high lipid or high carbohydrate, at a meal size of 4% the body mass. Using a continuous-flow respirometer, we determined the oxygen consumption rate at 2-h intervals until the postprandial oxygen consumption rate returned to the prefeeding level. None of the parameters (resting metabolic rate, Rpeak, factorial ratio, time-to-peak, duration, energy expended on SDA, or SDA coefficient) were significantly affected by diet nor was there an interaction between diet and body mass. Rpeak and energy expended on SDA for the whole fish body were significantly higher in the larger fish than the smaller one in both dietary treatments, whereas no significant effect of body size was found in mass specific values. Factorial ratio (range 3.41 to 3.60), peak time (range 9.6 to 12.7 h), SDA coefficient (range 9.36 to 10.36%), and SDA duration (range 62.0 to 71.0 h) did not significantly differ between body size groups. These results suggest that in S. meridionalis the percentage of assimilated energy allocated to SDA may be independent of the body mass.     

Evaluation of three phytoplankton species as food for the pearl oyster <Emphasis Type="Italic">Pinctada fucata</Emphasis>

In the pearl cultivation farms of the Ehime Prefecture, Japan, mass mortalities of the pearl oyster Pinctada fucata have occurred since 1994. The occurrences of mass mortality roughly coincided with a shift of the dominant phytoplankton from Skeletonema and Chaetoceros to Chaetoceros and Nitzschia all of which belong to Bacillariophyceae. Hence, we evaluated Nitzschia, together with Chaetoceros and Isocrysis, as food for the oyster. Wet weights, lengths, widths, glycogen contents, and growth rates in terms of wet weight of the oysters in all the feeding treatments were significantly higher than those in the non-feeding treatment. The highest glycogen content (2.34%) and growth rate (2.21 g month⁻¹) were found in the Chaetoceros treatment. Growth rate in the Isocrysis treatment (1.63 g month⁻¹) was also high, although glycogen content in this treatment (0.41%) was low. In the Nitzschia treatment, growth rate of the oyster (0.94 g month⁻¹) was the lowest and glycogen content (0.83%) was also low relative to that in the Chaetoceros treatment. Chlorophyll a concentration in fecal pellets was lowest in the Nitzschia treatment (<2.7 μg mg⁻¹), suggesting more complete digestion of Nitzschia by the oyster. Thus, Nitzschia was edible and digestible but not assimilated by P. fucata. We propose the following scenario for the relationship between Nitzschia dominance and mass mortality. When Nitzschia dominates in a culture area, the physiological condition of P. fucata deteriorates due to low assimilation of Nitzschia by the oyster, followed by susceptibility of the oyster to infection by agents lethal to the oyster.     

The harvest of the freshwater crayfish <Emphasis Type="Italic">Astacus leptodactylus</Emphasis> Eschscholtz in Turkey: harvest history,impact of crayfish plague,and present distribution of harvested populations

This review focuses on the present distribution of populations of the crayfish Astacus leptodactylus that are harvested in Turkey. It also examines the history of this harvest and the impact that crayfish plague has had on them. Crayfish plague, caused by the fungus-like organism, Aphanomyces astaci Schikora, 1906, is a severe parasite of freshwater crayfish and has caused a lot of damage to A. leptodactylus populations in Turkey since 1984. Turkey was the largest provider of A. leptodactylus to Western Europe from 1970 (or possibly earlier) until 1986. For example, the peak production was reached in the early 1980s, with over 5,000 tonnes being exported in 1984. On the other hand, as a result of the crayfish plague the harvest of A. leptodactylus was reduced severely in most populations in Turkey after 1985. The harvest was only 320 tonnes in 1991. After the occurrence of crayfish plague in Turkey, in order to increase crayfish production uncontrolled A. leptodactylus stockings have been carried out in many waterbodies throughout Turkey. These introductions have caused an increase in the number of A. leptodactylus populations, but exploitation of A. leptodactylus is still under the pressure of the plague, although there has been a steady increase in crayfish production in recent years. The harvest increased to 2,317 tonnes in 2004. Fortunately, among those populations affected by crayfish plague, large amounts of A. leptodactylus can still be harvested from three lakes, ?znik (Bursa), E?irdir (Isparta) and Çivril (Denizli). Thus, it seems that A. leptodactylus has a degree of resistance to crayfish plague. It is therefore interesting to investigate the resistance of A. leptodactylus caught from these populations to crayfish plague.     

Transpositional feeding rhythm of loach <Emphasis Type="Italic">Misgurnus anguillicaudatus</Emphasis> from larvae to juveniles and its ontogenesis under artificial rearing conditions

The diel feeding rhythm and ontogenesis during early life stage of loach Misgurnus anguillicaudatus were investigated under experimental conditions (light: L 06:00–18:00, D 18:00–06:00 h). Morphological and behavioral developments of loach from newly hatched to 40 days after hatching were observed. Larvae were able to prey on daphnia 3–4 days after hatching at 23 ± 0.5°C. As the larvae grew, they showed an increasing feeding capacity and a distinct feeding rhythm. Feeding intensity and incidence for day-4 larvae were highest at 10:00 and 16:00 h. The highest levels of feeding intensity for day-12 larvae occurred at 08:00, 12:00, and 18:00 h as did feeding incidence. By day 20, when the larvae metamorphosed, the highest levels of feeding intensity occurred at 06:00, 18:00, and 24:00 h and were concurrent with the highest feeding incidence. After metamorphosis, feeding capacity had again increased considerably and, in contrast to the earlier stages before day 20, feeding intensity for day-30 juveniles peaked at 05:00 and 20:00 h, about 1–2 h after the maximum feeding incidence. The feeding rhythm of loach juveniles at day 40 was almost the same as the day-30 juveniles. The estimated maximum daily feeding rates were 43.1%, 33.4%, 19.0%, 12.8%, and 5.8% of body weight on days 4, 12, 20, 30, and 40, respectively. Thus, loach was found to have different feeding rhythms in the pre- and post-metamorphosis stages, with the highest feeding activity in daytime during the larval planktonic stage before metamorphosis, and intensely nocturnal feeding behavior during the juvenile benthic stage after metamorphosis.     

Growth rates and survival of western rock lobster (Panulirus cygnus) at two temperatures (ambient and 23 °C) and two feeding frequencies

Wild caught post-pueruli, year one and year two post settlement juvenile western rock lobster, Panulirus cygnus, were held at ambient temperatures (15.6 °C to 23.1 °C; mean 19.0 ± 0.07 °C) or at 23 °C, and fed the same ration of a formulated pellet diet either once per night, or 3 times per night, over 12 months, to determine whether elevated temperatures and multiple feeds per night would stimulate growth through increased metabolism and feed utilisation without significant negative impacts on survival. Survival of post-pueruli (mean 63%) did not differ between ambient and 23 °C. Survival of year 1 and 2 juveniles was higher at ambient temperatures (p < 0.01 ambient: year 1 juveniles, 68%; year 2 juveniles, 88%; 23 °C: 57% and 74%, respectively). Feeding frequency did not affect survival of post-pueruli and year 2 juveniles (mean 63%, 81% respectively), but survival was 9% higher for year 1 juveniles fed three times per night (58% versus 67%; p < 0.01). All lobsters grew faster at 23 °C than at ambient temperatures (p < 0.05), with the growth of post-pueruli almost doubled at 23 °C (weight gain at 23 °C versus ambient: post-pueruli, 18 438 % versus 9 915 %; year 1 juveniles 259% versus 165%; year 2 juveniles 23% versus 21%). Feed frequency did not influence the growth of year 1 and 2 juveniles. However, there was an interaction effect of temperature and feed frequency on post-pueruli where weight and carapace length were significantly higher at ambient temperatures when post-pueruli were fed three times a day, whereas at 23 °C weight and carapace length were significantly greater when fed once per day (p < 0.05). Feed intake (g pellet dry matter lobster^− 1 day^− 1) of pellet was higher at 23 °C for all lobsters (p < 0.05), but was the same between lobsters fed 3 times per night versus once per night. This study has shown that increasing temperatures to 23 °C significantly improved the growth of P. cygnus post-pueruli without any adverse effects on survival. The faster growth rates exhibited by year 1 and 2 juveniles at 23 °C may potentially offset their lower survival by significantly reducing culture period. There is no benefit of feeding P. cygnus multiple times at night in terms of growth and survival. The implications for P. cygnus culture are that temperatures should be maintained close to 23 °C during the entire growout period, with due care taken to minimise mortalities through adequate provision of food and shelter. Feeding P. cygnus once daily to excess just prior to dusk to co-incide with nocturnal feeding behaviour is recommended.     

Preparation and characterizations of polypyrrole on liquid ammonia pre-treated wool fabric

Wool fabric was treated with liquid ammonia at -40 °C for 30 and 60 s prior to the application of polypyrrole (PPy). The polymer was deposited on wool fiber using the chemical oxidation method with 0.02 and 0.05 mol/l (Py) monomer concentration and FeCl₃ as a catalyst. Functional groups of wool samples were analyzed using FT-IR, and surface morphology was investigated using SEM micrographs. Properties such as water absorbency, surface resistivity, abrasion resistance, weight add-on, and air permeability of coated specimens were explored. The FT-IR outcomes revealed the liquid ammonia pre-treatment changed the amount of amide I (NH), cystic acid, cystic monoxide, and dioxide content of the fiber. SEM micrographs revealed the descaling of wool surface after pre-treatment and smooth coating of polymer. Pre-treatment of wool in liquid ammonia improved absorbency of wool fabric with respect to the treatment duration. The surface resistivity of wool fabric decreased with the increase of monomer concentration and pre-treatment duration. The results of abrasion resistance confirmed that the pre-treated fabric exhibited lower loss of polymer after 200 cycles of abrasion. The weight of the fabric was increased and air permeability decreased when the monomer concentration and liquid ammonia pre-treatment duration was increased.     

Chemical synthesis of polypyrrole film and its adsorption capacity for aromatic polycarboxylic acids

Polypyrrole (PPy) film was prepared via in-situ chemical polymerization of pyrrole monomer on the surface of red-clay-brick (RCB) substrate. The deposited PPy film was characterized and used as an adsorbent for removal of benzene polycarboxylic acids from aqueous solutions. The effects of solution pH, contact time, initial concentration, and temperature on the adsorption process were systematically investigated to find the optimum operating conditions. Adsorption kinetic data were best fitted by pseudo-second order kinetic model. The adsorption equilibrium data were most represented by the Freundlich isotherm model. The maximum adsorption amounts of Trimellitic, Hemimellitic, and Pyromellitic acids were 189.27, 177.26, and 203.31 mg/g, respectively. The thermodynamic studies indicate that the adsorption was an endothermic and spontaneous process. Also, the PPy-RCB film was successfully regenerated using sodium hydroxide solution. The regenerated PPy-RCB can be reused for more than four successive cycles with a low reduction in adsorption efficiency.     

Influence of synergism caused by organic montmorillonite and nanometer calcium carbonate on mechanical properties and crystallization of polyamide 1010-based composites

This account showed that nanometer-active calcium carbonate (CaCO₃) improved polyamide 1010/organic montmorillonite (OMMT) composites and OMMT boosted polyamide 1010/CaCO₃. The mechanical performance suggested the composites to be reinforced through adsorption forces present between the nanofillers and the matrix. The synergistic effect of CaCO₃ and OMMT increased the yields and shrunk cavities when observed by scanning electron microscopy. The obvious resulting synergism was verified by X-ray scattering techniques after the addition of OMMT. The concentration of CaCO₃ did not change lamellar-size or influence the crystal growth. The effect of CaCO₃ on melting behavior was found less significant than that exert on crystallization behavior.     

Effects of date palm leaf fiber on the thermal and tensile properties of recycled ternary polyolefin blend composites

This work investigated the effects of date palm leaf fiber (DPLF) content on the thermal and tensile properties; and morphology of compatibilized polyolefin ternary blend. Recycled polyolefin ternary blend consisting of low density polyethylene (RLDPE), high density polyethylene (RHDPE) and polypropylene (RPP) were fabricated at different parts per hundred resin (phr) of DPLF. Maleic anhydride grafted polyethylene (MAPE) was used as compatibilizer to enhance the adhesion between filler and polymer matrix. The composites were prepared using melt extrusion and tests samples were produced via injection molding process. Thermal conductivity results showed that as much as 11 % reduction in thermal conductivity was achieved with the incorporation of 30 phr DPLF. Highest tensile strength was observed with the incorporation of 10 phr DPLF. The elongation at break was reduced with the addition of DPLF due to impediment of chain mobility by the fillers. Initial degradation temperature increased with the addition of DPLF. Hence, it is concluded that DPLF can be used to develop green and thermally insulating composites. It is hoped that the present results will stimulate further studies on the thermally insulative materials based on natural fibers reinforced polymer composites for applications in the building industries.     

Characterization of the surface properties of cellulosic fibers in fibrous and ground forms by IGC and contact angle measurements

Surface properties of fibrous and ground cotton and linen were investigated by inverse gas chromatography (IGC) and the contact angle with different liquids was also measured on fabrics composed of both fibers. Results proved that dispersion component of surface tension (γ _s ^d ) determined by IGC depends not only on the surface energy, but also on several factors influencing the adsorbability of probe molecules on the cellulosic substrates. For cotton samples, the trapping of n-alkanes among waxy molecules in the outer layer of fibers can be presumed. This effect results in larger γ _s ^d for cotton fibers than for linen in spite of the higher wettability of the linen fabrics. Besides the surface energy and trapping effects, the grinding also influences the γ _s ^d values. Specific enthalpy of adsorption (ΔH _A ^ab ) of polar probes could be determined on all linen samples, but only on the ground cotton sample. Lewis acid-base character calculated for linen and ground cotton samples depends on the same effects as the γ _s ^d does. The similar ΔH _A ^ab values of chloroform (acidic) and THF (basic) measured on each of the samples support the conclusion that the surface character is amphoteric, which is also proved by the high ΔH _A ^ab values of the amphoteric ethyl acetate and acetone probes.