Application of a modified rate equation to the acetylation of wood

A modified rate equation, in which the diffusion of reagent was taken into consideration, was proposed and applied to results reported previously for the acetylation of wood. The equation was fitted more successfully to the prolonged as well as the early stage of the reaction than a common first-order rate equation. Although the conclusions were virtually unchanged, the reliability was enhanced because reaction parameters such as the rate constant, ultimate extent of the reaction, and activation energy calculated for the modified equation were based on much more data than those reported previously. The equation proposed here may be applicable not only to acetylation but to other chemical modifications of cellulosic materials in heterogeneous systems.     

Powdery mildew resistance gene (<Emphasis Type="Italic">Pm</Emphasis>-<Emphasis Type="Italic">AN</Emphasis>) located in a segregation distortion region of melon LGV

Powdery mildew is one of the most important melon pathogens all over the world. So far, many genes conferring resistance to powdery mildew of melon have been described, but few of these have been finely mapped or cloned. Two F₂ populations derived from Ano2 × Hami413 and Ano2 × Queen were used to map the powdery mildew resistance gene by methods of Bulked Segregation Analysis (BSA), comparative genomics and Resistance Gene Analogues (RGA) mapping. It was found that the resistance to powdery mildew in Ano2 was conferred by a dominant gene, and the gene was named Pm-AN. The genetic analysis revealed that Pm-AN located between two codominant markers RPW and MRGH63B in linkage groupV. The genetic distances between Pm-AN and these two markers were 1.4–1.8 and 1.6–2 cM. No recombination was found between Pm-AN and markers ME/E1, SRAP23. Pm-AN was located in a RGA-rich region and cosegregated with the RGA marker MRGH5 and the resistance gene Vat. Synteny analysis showed that markers in this region were collinear between melon and cucumber. Segregation distortion was found in this region using both Ano2 × Hami413 and Ano2 × Queen F₂ populations, and the distortion was more distinct in Ano2 × Hami413 F₂ population. The center of segregation distortion was located in the RGA rich region harboring Pm-AN.     

Comparison of stand dynamics after dieback caused by pine wilt disease among pine forests with different management regimes in western Japan

In pine forests damaged by pine wilt disease, in western Japan, the effect of protection regimes of pine trees on the stand dynamics were examined in the following four stands: (1) lightly damaged stand (age 30–40 years) with no procedure in operation for protecting pine trees; (2) severely damaged stand (age 30–40 years) with no procedure in place for protecting pine trees; (3) severely damaged stand (age 50 years) with a selective cutting of infected trees; (4) severely damaged stand (age 30–40 years) with a selective cutting of infected trees. All the stands had been abandoned before the pine wilt disease damage. The understory structure of the severely damaged stand with no protection procedure was similar to that of the lightly damaged stand. Frequent invasion by tree species and acceleration in the growth of understory trees occurred after the dieback in the selective cutting stand. These results suggest that a deficiency in the canopy layer caused by the dieback resulted in low disturbance intensity in the early stages after the dieback, but the selective cutting increased the intensity by the reduction in the understory as well as the canopy layer. The intensity of the disturbance in the selective cutting stands was larger in the younger stand because it had a higher density of selectively cut pine trees. The different stand structure of pine forests occurred after the dieback because the intensity of the disturbance varied as a result of the selective cutting operation and the stand age.     

Compressive and tensile properties of a butt-jointed lamination model

A study was undertaken to evaluate the effect of glue application and placement of butt-joints on the compressive and tensile properties in a butt-jointed lamination. The aim was to provide background information for producing butt-jointed, glued, laminated timber. Three butt-jointed lamination models were prepared from spruce-pine-fir (S-P-F) dimension lumber with glued and nonglued butt joints, with different placements of the butt joints in the models. The axial stiffness and strength properties were assessed using both compressive and tensile tests. The results of the study indicated that for the compressive lamination model the application of glue at the butt joint gave more stiffness than the nonglued butt joint. Neither glue application nor placement of the joint had a statistically significant effect on the compressive strength. There were no significant differences between the glued and nonglued butt joint for either tensile strength or stiffness.     

Thermal diffusion in Masson pine wood

In order to analyze the effects of the temperature gradient on moisture movement during the highly intensive microwave-vacuum drying, thermal diffusion of Masson pine wood was studied. Internal distribution of temperature and moisture in Masson pine samples sealed by epoxy resin and aluminum foil was measured, the magnitude of thermal diffusion was calculated and the influencing factors of thermal diffusion were discussed. Results showed that with the transfer of moisture toward the low temperature in wood, opposite temperature and moisture gradient occurred. The initial moisture content （MC）, temperature and time are important factors affecting this process; the thermal diffusion is in proportion to wood temperature, its initial moisture and time. The temperature and distance from hot surface is strongly linearly correlated, and the relationship between MCs at different locations and distance from the hot end surface changes from logarithmically form to exponentially form with the increase in experimental time.     

Effect of coupling media on velocity and attenuation of ultrasonic waves in Brazilian wood

Coupling media are necessary to ensure that transducers bond to wood specimens to minimize coupling losses and improve the accuracy of ultrasonic measurements. There are several types of coupling media available, and the optimal choice is not known. In this work, we analyzed the results of ultrasonic wave attenuation for 0.1-MHz longitudinal and transverse transducers with six different materials as coupling media in nine species of Brazilian wood with densities in the range 700–1170 kg/m³. Tests were performed using constant pressure on the transducer and with wave propagation in the longitudinal direction. For transverse transducers, the polarization was in the radial and tangential directions. The results were analyzed statistically and showed that, for attenuation in both longitudinal and transverse waves, the material used for coupling had significant effects, whereas the wood species had no effect. For longitudinal waves, the statistical evaluation showed that the coupling material performance was strongly dependent on the species of wood, but it was not possible to observe any tendency of behavior associated with specific anatomical properties.     

Development and Implementation of a Forest Nursery Accreditation Policy at a Local Level in Leyte, Philippines

Through a series of workshops with the stakeholders including nursery operators, tree farmers, staff of the Department of Environment and Natural Resources, local government units and the academe, a forestry seedling nursery accreditation policy was developed. The resulting policy was subsequently implemented by the municipal government of Palompon, Leyte. The accreditation policy encouraged nursery operators to follow smallholder-based best management practices for tree nurseries. Implementation of the nursery accreditation policy improved farmers’ knowledge and skills in the production of high quality seedlings, encouraged adoption of BMP for forest nurseries, provided additional source of income for the farmers, enabled members of the groups operating the communal nursery to forge closer relationship with each other, encouraged utilization of farmers’ free time in productive activities, developed farmers’ confidence in producing high quality planting materials, and gained for the farmers favourable attention from various organizations and groups. The Bennett’s hierarchy of project outcomes showed that the implementation of accreditation scheme achieved high levels of outcomes, indicating that it led to substantial improvements in the lives of the farmers.     

Coffee agroecosystem performance under full sun, shade, conventional and organic management regimes in Central America

Changes in coffee economics are leading producers to reduce agrochemical use and increase the use of shade. Research is needed on how to balance the competition from shade trees with the provision of ecological services to the coffee. In 2000, long-term coffee experiments were established in Costa Rica and Nicaragua to compare coffee agroecosystem performance under full sun, legume and non-legume shade types, and intensive and moderate conventional and organic inputs. Coffee yield from intensive organic production was not significantly different from intensive conventional in Nicaragua, but in Costa Rica it was lower during three of the six harvests. Full sun coffee production over 6 years was greater than shaded coffee in Costa Rica (61.8 vs. 44.7 t ha^?1, P = 0.0002). In Nicaragua, full sun coffee production over 5 years (32.1 t ha^?1) was equal to coffee with shade that included Tabebuia rosea (Bertol.) DC., (27?C30 t ha^?1) and both were more productive (P = 0.03) than coffee shaded with Inga laurina (Sw.) Willd. (21.6 t ha^?1). Moderate input organic production was significantly lower than other managements under all shade types, except in the presence of Erythrina poepiggina (Walp.) O.F. Cook. Inga and Erythrina had greater basal area and nutrient recycling from prunings than other shade species. Intensive organic production increased soil pH and P, and had higher K compared to moderate conventional. Although legume shade trees potentially provide ecological services to associated coffee, this depends on management of the competition from those same trees.     

Evaluation of VI-alpha and PIT-tagging of the seahorse <Emphasis Type="Italic">Hippocampus abdominalis</Emphasis>

The suitability of visible implant alphanumeric (VI-alpha) and passive integrated transponder (PIT)-tagging to individually identify seahorses (Hippocampus abdominalis) was assessed in two trials. For each trial, 24 seahorses were tagged and mortality, growth, tag retention and tag visibility/readability assessed, together with 24 control seahorses, over a period of 3 months. For VI-alpha tagging, a single tag was inserted under the skin between the first two anterior lateral tail rings of the seahorses. There was no difference in final seahorse length, wet weight, or mean SGR in tagged seahorses, compared with control seahorses, after 3 months. Tag retention was 100%, as was survival, in both treatments. Tag detection with the naked eye was generally poor but improved using LED blue light. However, readability of tag codes was highly variable and insufficiently reliable for VI-alpha to be suitable for identification of individual seahorses. In PIT-tagged seahorses, a single FDX-B transponder was inserted into the abdominal cavity of seahorses. There was also no difference in final seahorse length, wet weight, or mean SGR, compared with control seahorses, after 3 months. Tag retention was also 100%, as was survival in both treatments. Readability of transponders was reliable and quick using a compact reader. PIT-tagging is considered suitable for individual identification of large H. abdominalis.