Effects of rice straw,biochar and mineral fertiliser on methane (CH<Subscript>4</Subscript>) and nitrous oxide (N<Subscript>2</Subscript>O) emissions from rice (<Emphasis Type="Italic">Oryza sativa</Emphasis> L.) grown in a rain-fed lowland rice soil of Cambodia: a pot experiment

We studied the effects of water regimes and nutrient amendments on CH₄ and N₂O emissions in a 2 × 3 factorial, completely randomised growth chamber experiment. Treatments included continuously flooded (CF) and alternate wetting and drying (AWD), and three organic amendments: no amendment-control, rice straw (RS) and biochar (BC). Compound fertiliser was applied to all treatments. Rice was grown in columns packed with a paddy soil from Cambodia. Results revealed faster mineralisation of organic carbon (RS and BC) when applied in water-saturated conditions lasting for 2 weeks instead of flooding. This resulted in lower total CH₄ emissions in treatments under AWD than those under the CF water regime, namely 44 % in RS treatments and 29 % in BC treatments. Nitrous oxide fluxes were generally non-detectable during the experimental period except after fertilisation events, and the total N₂O–N emissions accounted for on average 1.7 % of the total applied mineral fertiliser N. Overall, the global warming potentials (GWPs) were lower in treatments under AWD than those under the CF water regime except for the control treatment with only mineral fertiliser application. Grain yields were slightly higher in treatments under AWD than the CF water regime. Hence, the yield-scaled GWP was also lower in the treatments under the AWD water regime, namely 51 % in RS, 59 % in BC and 17 % in control treatments. Control treatments had the lowest GWP, but provided the highest yield. The yield-scaled GWP under these treatments was therefore lower than under the other treatments.     

The impact of dry and wet cleaning on fabric electromagnetic field shield effect

The aim of this research is to investigate shield effect properties of the fabrics with inox yarns included in the construction, which are used for special professional garments and should protect from electromagnetic microwave irradiation. The investigation was done prior to and after the professional care procedures of dry and wet cleaning in ten cleaning cycles. Shield effect measurements were done on the face and on the back of the fabric, weftwise and warpwise, prior to and after the first, third, fifth, seventh and tenth cycles of dry and wet cleaning, at the frequencies from 0.9 to 2.4 GHz. The results obtained indicated that shield effect of the fabric tested was reduced after professional care procedures, especially so after 5 cycles. The investigations also revealed that shield effect could be considerably enhanced if the inox yarns were incorporated into the fabric in the direction of the warp.     

Conjugating S-nitrosothiols with fluorescent nanofibers for the controlled release and real-time detection of nitric oxide

In this work, a novel hybrid fibrous vehicle was developed for the release and real-time detection of nitric oxide (NO). The vehicle consisted of poly(L-lactide)/chitosan (PLLACS), cadmium tellurium quantum dots (CdTe QDs), and conjugating S-nitrosothiols. CdTe QDs were placed on the surface of PLLACS fibers as NO fluorescent probes through coaxial electrospinning; in this method, the PLLACS was used as filament material. Water-dispersible CdTe QDs were synthesized using mercaptoacetic acid as a stabilizer. The amino groups of chitosan served as reactive sites where chitosanbased S-nitrosothiols were formed. The fibrous PLLACS-QDs-NO composite was found to release NO under UV. The released NO could be detected in real time on the basis of the fluorescence quenching mechanism of QDs. These PLLACSQDs-NO nanofibers provide insights into novel designs of biocompatible NO delivery systems.     

Mechanical behavior of composites reinforced with fibers caroa

Composites were prepared with 13, 23 30 and 40 % fiber and evaluated the mechanical performance in tensile, flexural and impact. The mechanical properties of these composites were also evaluated function of time at 110 °C thermal exposure. Caroa fibers were characterized by techniques such as thermal gravimetric analysis (TGA), X-ray diffraction (XRD) and scanning electron microscopy (SEM). It was found that the best mechanical properties were achieved for composites containing 23 to 30 % fiber. The incorporation of 23 % fiber caroa increased both the modulus of elasticity in the tensile test as the flexural strength and impact, the composite with 30 % fiber caroa showed higher tensile strength. The results show that the tensile and flexural strength of the composite decreased with time of thermal exposure. The thermal aging at 110 °C caused a decrease in tensile properties of the composites.     

Copper functionalization of polypropylene fabric surface in order to use in fog collectors

Polypropylene fabrics were coated with copper particles using electroless plating, screen printing and wire arc spray coating techniques. Surface morphology of the fabrics was studied using optical and scanning electron microscopes (SEM). Furthermore, tensile strength, electrical conductivity, thermal conductivity, air permeability, water contact angle and fog collection efficiency of the coated fabrics were measured and the obtained results were analyzed. SEM micrographs showed that a very thin and uniform layer of copper deposited on the surface of the electroless plated polypropylene fibers. In the printed or spray coated fabrics the copper particles filled the spaces between yarns and fibers. The polypropylene electroless copper plated fabrics showed higher tensile strength, electrical conductivity, air permeability and thermal conductivity when compared with the fabrics coated with copper screen printed and copper spray coated fabrics. Finally, the obtained results showed that copper electroless plating could increase the fog collection efficiency of polypropylene fabrics considerably. As a conclusion, the surface modified copper electroless polypropylene fabrics are good candidates for fog collection in appropriate regions which need further investigations.     

Tools for knowledge acquisition within the NeuroScholar system and their application to anatomical tract-tracing data

Background

Knowledge bases that summarize the published literature provide useful online references for specific areas of systems-level biology that are not otherwise supported by large-scale databases. In the field of neuroanatomy, groups of small focused teams have constructed medium size knowledge bases to summarize the literature describing tract-tracing experiments in several species. Despite years of collation and curation, these databases only provide partial coverage of the available published literature. Given that the scientists reading these papers must all generate the interpretations that would normally be entered into such a system, we attempt here to provide general-purpose annotation tools to make it easy for members of the community to contribute to the task of data collation.

Results

In this paper, we describe an open-source, freely available knowledge management system called 'NeuroScholar' that allows straightforward structured markup of the PDF files according to a well-designed schema to capture the essential details of this class of experiment. Although, the example worked through in this paper is quite specific to neuroanatomical connectivity, the design is freely extensible and could conceivably be used to construct local knowledge bases for other experiment types. Knowledge representations of the experiment are also directly linked to the contributing textual fragments from the original research article. Through the use of this system, not only could members of the community contribute to the collation task, but input data can be gathered for automated approaches to permit knowledge acquisition through the use of Natural Language Processing (NLP).

Conclusion

We present a functional, working tool to permit users to populate knowledge bases for neuroanatomical connectivity data from the literature through the use of structured questionnaires. This system is open-source, fully functional and available for download from [1].

     

Collaboration and distances between German immunological institutes – a trend analysis

Background

The hypothesis that distance matters but that in recent years geographical proximity has become less important for research collaboration was tested. We have chosen a sample–authors at German immunological institutes–that is relatively homogeneous with regard to research field, language and culture, which beside distance are other possible factors influencing the willingness to co-operate. We analyse yearly distributions of co-authorship links between institutes and compare them with the yearly distributions of distances of all institutes producing papers in journals indexed in the Science Citation Index, editions 1992 till 2002. We weight both types of distributions properly with paper numbers.

Results

One interesting result is that place matters but if a researcher has to leave the home town to find a collaborator distance does not matter any longer. This result holds for all years considered, but is statistically most significant in 2002. The tendency to leave the own town for collaborators has slightly increased in the sample. In addition, yearly productivity distributions of institutes have been found to be lognormal.

Conclusion

The Internet did not change much the collaboration patterns between German immunological institutes.

     

Effects of silver content and morphology on the catalytic activity of silver-grafted titanium oxide nanostructure

As titanium oxide is a well-known photocatalyst, we investigated the effects of silver content and nanostructural morphology on the photocatalytic degradation of two dyes, methylene blue and rhodamine B. Two nano-formulations were utilized, including nanofibers and nanoparticles. Silver-grafted titanium oxide nanofibers were synthesized using the electrospinning of silver nitrate/titanium isopropoxide/poly(vinyl acetate) sol-gel. The nanoparticulate form was obtained by calcination of a ground powder prepared from the same electrospun sol-gel. The results affirmed the advantage of the silver-grafted titanium oxide nanostructures over the silver-free ones. Increasing the silver content in the nanofibers led to increases in their surface area, which is an important parameter in heterogeneous catalytic chemical reactions. Therefore, the results strongly suggest the use of silver-grafted titanium oxide in a nanofibrous form. These results further support utilizing Agloaded titanium oxide nanofibers as a photocatalyst.     

Union dyeing of the photografted PET/wool blend fabrics with dimethylaminopropyl methacrylamide

Dimethylaminopropyl methacrylamide (DMAPMA) was grafted onto PET/wool blend fabrics by continuous UV irradiation. Union dyeing of the photografted fabrics was investigated using three reactive dyes of α-bromoacrylamide reactive groups. The influence of grafting yield, DMAPMA concentration, NaCl amount, pH value, and dyeing temperature on the dyeability was evaluated. The dyeability of both PET and wool components was improved significantly by the DMAPMA photografting and successive reactive dyeing. Although the dyeability of the PET component in the blend substantially was improved with higher grafting, equal dyeability between PET and wool was difficult to achieve due to more facile grafting and higher reactivity of the wool component compared with the modified PET component. However, the color fastness of the PET/wool blend fabric was excellent for all three colors. This study may offer a way to achieve union dyeing of PET/wool blend fabrics.