Restriction endonuclease analysis of canine herpesviruses isolated in Japan

Eighteen canine herpesvirus (CHV) isolates from Japan and two reference strains were compared by restriction endonuclease analysis technique using total DNA extracts from cells infected with the viruses. In order to select the suitable restriction endonucleases for differentiation of CHV isolates, ten enzymes were used and three of them, HindIII, XbaI, and PvuII, were found to be useful for strain differentiation. With these enzymes, CHV isolates from unrelated individuals were readily differentiated from each other. In contrast, all the isolates derived from the same litter were not distinguishable on the basis of restriction cleavage patterns. However, slight mobility shifts were observed among the isolates from the same litter or the same individual. The results showed that this method provides a powerful tool for epidemiological surveys of CHV infection.     

Prediction of the buckling stress of intermediate wooden columns using the secant modulus

We made several buckling tests of wooden columns with intermediate slenderness ratios () and examined the empirical formulas. On the basis of the examination, we formulated an equation for predicting the buckling stress () of an intermediate wooden column. Sitka spruce (Picea sitchensis Carr.) and buna (Japanese beech, Fagus crenata BI.) were used for the studies. A compressive load was applied on the specimen supported with pin ends, and the buckling stress was predicted by the tangent modulus theory and two empirical equations: those of Tetmajer and Newlin-Gahagan. The predicted - relations were compared with the test results, and the applicability of these predictions were examined. Based on the comparisons, we formulated an equation that can predict the - relations of materials with various stress-strain characters in the plastic strain range.     

Spectrophotometrical characteristics in the near infrared region in beech (<Emphasis Type="Italic">Fagus crenata</Emphasis>) and pine (<Emphasis Type="Italic">Pinus densiflora</Emphasis>) litters at the various decomposing stages

We examined the relationships between the absorptional characteristics in the near infrared region and the chemical changes of decomposing beech (Fagus crenata) and pine (Pinus densiflora) litters. Spectra as well as the concentrations of chemical substances approached each other and converged with decomposition, although both initial characteristics differed markedly between beech and pine. This indicated that the fundamental chemical structures were almost the same, although their organochemical composition differed. Specific absorption bands for lignin, polysaccharide, and protein were identified at 2,140 and 1,670 nm, 2,270, 1,720, 1,590, and 1,216 nm, and 2,350 nm, respectively. Absorbance at 1,670 nm, peculiar band of aromatics, showed a positive correlation with lignin concentration, which suggested the relative increment of aromatics due to condensed lignin in decomposing litters. Absorbance at 2,140 nm, characterized as the C–H bond in HRC = CHR, showed a negative correlation with lignin concentration, which suggested the decrements of some structures such as side-chains in lignin polymers unrelated to aromatics. Absorbance at 2,270, 1,720, and 1,216 nm, specified to O–H/C–O/C–H bonds in saccharide, might reflect the change of polysaccharide during decomposition because they showed a positive correlation to polysaccharide concentration. In the same way, absorbance at 2,350 nm, identified to the C–H/CH₂ bonds in protein, showed a negative correlation to nitrogen concentration in decomposing litters, which might indicate that the C–H/CH₂ bonds in protein decreased with decomposition due to microbial consumption of carbon in protein. Our findings suggested the possibility that the spectral changes indicate the litter digestibility during decomposition and that also explain the compositional change in decomposing litters.     

Accuracy of shear properties of wood obtained by simplified Iosipescu shear test

We examined the accuracy of the shear properties of wood by the Iosipescu shear test using specimens whose shape was simplified. Quartersawn boards of sitka spruce (Picea sitchensis Carr.) and shioji (Japanese ash,Fraxinus spaethiana Lingelsh.) were used. Two types of specimen for the Iosipescu shear test were compared: a standard specimen whose notch angle is 90° and a keyhole type specimen, which is more easily prepared than the standard type. The shear modulus, yield shear stress, and failure shear stress of the keyhole-type specimen were compared to those of the standard specimen. Shear stress analysis was conducted using the finite element method (FEM). The results obtained were as follows: (1) The failure pattern obtained by the simplified Iosipescu shear test was similar to that seen with the standard Iosipescu shear test. (2) The shear modulus, yield stress, and failure stress obtained by the simplified Iosipescu shear test coincided with those by the standard Iosipescu shear test. (3) The principal strain angle and principal stress angle of the simplified Iosipescu shear test were about 45°. (4) It is recognized that pure stress is applied to the strain-gauge regions in the simplified Iosipescu shear test, and it is expected that the shear properties are independent of the notch angle.     

Assignment of the 1H and 13C NMR spectra of 2-aminobenzamide-labeled galacto- and arabinooligosaccharides

1,4-Linked β-d-galactooligosaccharides with a degree of polymerization (DP) between 1 and 7 and 1,5-linked α-l-arabinooligosaccharides with a DP between 1 and 8 were labeled at their reducing ends with 2-aminobenzamide (2AB) in the presence of sodium cyanoborohydride. The 2AB-labeled oligosaccharides were shown to be homogeneous using high-performance anion-exchange chromatography (HPAEC) and by electrospray ionization mass spectrometry (ESI-MS). The signals in the ¹H and ¹³C nuclear magnetic resonance (NMR) spectra of the 2AB-labeled oligosaccharides were then assigned using one- and two-dimensional NMR spectroscopy. These NMR data will be useful for the structural analysis of enzymatically synthesized galactan and arabinan side chains derived from rhamnogalacturonan I.     

Characterization of the products resulting from ethylene glycol liquefaction of cellulose

The composition of liquefied cellulose in the presence of ethylene glycol (EG) was studied. The liquefied products were fractionated and analyzed with highperformance liquid chromatography and nuclear magnetic resonance. EG-glucosides were detected as the only saccharides and 2-hydroxyethyl levulinate as the highly decomposed compound derived from cellulose. Quantitative analysis of the EG-glucosides and levulinic acid that comes from the levulinate shows the presence of the following mechanism in the EG-liquefaction of cellulose. First, cellulose is degraded and produces considerable amounts of EG-glucosides during the early stage of liquefaction. Then, when liquefaction is prolonged, the glucosides are decomposed, leading to a large quantity of levulinates.     

Chemical analysis of the product in acid-catalyzed solvolysis of cellulose using polyethylene glycol and ethylene carbonate

Degradation and decomposition of cellulose were studied in an acid-catalyzed solvolysis treatment of biomass using polyethylene glycol (PEG) and ethylene carbonate (EC). The solvolysis reaction was followed by a typical reaction system of wood liquefaction that uses sulfuric acid catalyst at 140° or 150°C at atmospheric pressure. The methods of fractionation and chemical analysis of the degraded cellulose in the solvolyzed product are discussed. The solvolyzed product was separated into several fractions, and they were hydrolyzed to release glucose and levulinic acid to determine the quantity of glucosides and levulinates in the solvolysis product. The data clearly showed that the solvolysis reaction had the same mechanism when using PEG or EC. Degradation of cellulose leads to the formation of glucosides, which then decompose, resulting in a levulinic acid structure, and producing a water-insoluble fraction. The conversion rates of both glucosides and levulinates strongly depend on the reaction conditions of the solvolysis. In particular, EC promotes faster conversion of the reactions. The method discussed here is a chemical analytical technique for characterization of the products of wood liquefaction.     

The duality of teleost gonadotropins

The duality of salmon gonadotropins has been proved by biochemical, biological, and immunological characterization of two chemically distinc gonadotropins. GTH I and GTH II were equipotent in stimulating estradiol production, whereas GTH II appears to be more potent in stimulating maturational steroid synthesis. The ratio of plasma levels and pituitary contents of GTHs and the secretory control by a GnRH suggest that GTH I is the predominant GTH during vitellogenesis and early stages of spermatogenesis in salmonids, whereas GTH II is predominant at the time of spermiation and ovulation. GTH I and GTH II are found in distinctly separate cells. In trout, GTH I is expressed first in ontogeny, whereas GTH II cells appear coincident with the onset of spermatogenesis and vitellogenesis, and increase dramatically at the time of final reproductive maturation. Comparison of the amino acid sequences of polypeptides and the base sequences of cDNA revealed that salmon GTH I β is more similar to bovine FSHβ than bovine LHβ and salmon GTH II β shows higher homology to bovine LHβ than to bovine FSHβ. The existence of two pituitary gonadotropins in teleosts as well as tetrapods suggests that the divergence of the GTH gene took place earlier than the time of divergence of teleosts from the main line of evolution leading to tetrapods.