Fault Section Diagnosis Algorithm of Distribution Networks Based On Topology Identification

An algorithm of fault section diagnosis based on topology identification for distribution networks is presented. By decomposing the topologic matrix which describing the distribution network into two parts,one part only contain the complex coupling factor ,and the other ignore the complex coupling factor. Using this method, the fault zones in distribution network can be identified and isolated efficiently, and the vertexes of the zones can also be identified automatically. This approach adapts to the changefully network structures.     

Analysis of Radial Forces on the Seal Block in a Compound Gear Pump with 3 Idle Gears

By analyzing the pressure distribution between gears and sealing blocks in compound gear pump with three idlers,the resultant hydraulic forces acting on seal blocks are obtained.The conclusion is the unbalanced resultant hydraulic forces are relatively small in magnitude.In the pump,the inner sealing edges are long and so it s Sealing effect is good,but the outer sealing effect is relatively poor because of its short sealing edges.The little unbalanced force pushes the sealing block to te pumping chamber,therefore it is advantageous to meliorating the pump's sealing effect,thereby to improving it's volumetric efficiency as well.     

A FINITE ELEMENT ALGORITHM FOR PARALLEL PROCESSING OF MULTI-FRONTS

In this paper,a new algorithm for solving large-scale finite element system is presented, which utilizes the architecture of parallel processing. Firstly, the structure is partitioned into sub-regions. Then multi-fronts are used to assemble and eliminate concurrently in every sub-region. Thus the condensed interface stiffness matrices and load vectors are obtained. By serially assembling and solving global equation to get interface displacements and backing to every sub-region, the inter-nodal displacements and element stresses can be solved. The results of computation show that it can not only increase the speed of computation,but also save the memory space of computer effectively. This algorithm is an effective method for solving large-scale structural finite element systems.     

A Spot Price Model with Var Cost

This paper has applied the var cost to the theory of spot price.An augmented Lagrange method is employed to develop the exact model of spot price of active power and reactive power,and the physical means of Lagrange multipliers are explained.The numerical examples are given to demonstrate the validity of the proposed model.     

Loads Equalization Based on Optimization Principle and the Hierarchical Model for Distribution Networks

Loss reduction is important for distribution networks and it is available to reduce loss by loads equalization. With increasing numbers of vertexes in distribution networks, compounding of loads are rapid increasing. It is hard to achieve the global optimization for load balancing by traditional model of distribution networks. Base on analyzing character of loads equalization for distribution networks, this paper provides a new method which conjugate the optimization principle and the hierarchical model of the distribution networks, can transfer the optimization issues into multi stage decision making problems,and can also achieve the optimization equalization of the distribution networks loads.     

Summarization of Current Research on Application of Durability of Structures

This paper summarized the recent research results about the durability of structures, introduced their current application in durability design, appraisal, estimation of rest life and strategy of maintenance and strengthening as well as in other fields.     

Seismic Behavior of Asymmetric Building under Pushover Analysis

Pushover analysis is a tool to study the inelastic behavior of structures under strong seismic action. The 3D-pushover analysis was performed to analyze the inelastic lateral-torsional coupled response of multistory asymmetric structures. The symmetric frame and frame-wall systems were studied in this paper, and the capability curve of the top displacement and base shear,the story drift and the position of rotation center were compared with reference to corresponding symmetric structures. The characters of inelastic response of multistory asymmetric structures were found. The conclusion provides reference for performance-based seismic design of asymmetric structures.     

Using midday stem water potential for scheduling deficit irrigation in mid–late maturing peach trees under Mediterranean conditions

Irrigation techniques that reduce water applications are increasingly applied in areas with scarce water resources. In this study, the effect of two regulated deficit irrigation (RDI) strategies on peach [Prunus persica (L.) Batsch cv. “Catherine”] performance was studied over three growing seasons. The experimental site was located in Murcia (SE Spain), a Mediterranean region. Two RDI strategies (restricting water applications at stage II of fruit development and postharvest) based on stem water potential (Ψ_s) thresholds (?1.5 and ?1.8 MPa during fruit growth and ?1.5 and ?2.0 MPa during postharvest) were compared to a fully irrigated control. Soil water content (θ_v), Ψ_s, gas exchange parameters, vegetative growth, crop load, yield and fruit quality were determined. RDI treatments showed significantly lower values of θ_v and Ψ_s than control trees when irrigation water was restricted, causing reductions in stomatal conductance and photosynthesis rates. Vegetative growth was reduced by RDI, as lower shoot lengths and pruning weights were observed under those treatments when compared to control. However, fruit size and yield were unaffected, and fruit quality was slightly improved by RDI. Water savings from 43 to 65 % were achieved depending on the year and the RDI strategy, and no negative carryover effect was detected during the study period. In conclusion, RDI strategies using Ψ_s thresholds for scheduling irrigation in mid–late maturing peach trees under Mediterranean conditions are viable options to save water without compromising yield and even improving fruit quality.     

Measured and estimated water use and crop coefficients of grapevines trained to overhead trellis systems in California’s San Joaquin Valley

The use of overhead trellis systems for the production of dry-on-vine (DOV) raisins and table grapes in California is expanding. Studies were conducted from 2006 to 2009 using Thompson Seedless grapevines grown in a weighing lysimeter trained to an overhead arbor trellis and farmed as DOV raisins for the first two years and for use as table grapes thereafter. Maximum canopy coverage for the two lysimeter vines across years was in excess of 80 %. Seasonal (15 March–31 October) evapotranspiration for the lysimeter vines (ET_Lys) was 952 mm in 2007 (farmed as DOV raisins) and 943 and 952 mm (when farmed as table grapes). The maximum crop coefficient (K _cLys) across all 4 years ranged from 1.3 to 1.4. These maximum values were similar to those estimated using the relationship where K _c is a function of the amount of shaded area measured beneath the canopy at solar noon (K _c = 0.017 × percent shaded area). Covering the lysimeter’s soil surface with plastic (and then removing it) numerous times during the 2009 growing season (1 June–14 September) reduced ET_Lys from an average of 6.4 to 5.6 mm day^?1 and the K _c from 1.07 to 0.93. A seasonal basal K _c (K _cb) was calculated for grapevines using an overhead trellis system with a 13 % reduction in the K _cLys across the growing season.     

Crop response of drought-tolerant and conventional maize hybrids in a semiarid environment

In the High Plains, corn (Zea mays L.) is an important commodity for livestock feed. However, limited water resources and drought conditions continue to hinder corn production. Drought-tolerant (DT) corn hybrids could help maintain high yields under water-limited conditions, though consistent response of such hybrids is unverified. In this two-year study, the effects of three irrigation treatments were investigated for a DT and conventional maize hybrid, Pioneer AQUAMax P0876HR and Pioneer 33Y75, respectively. In 2013, the drier of the 2 years, irrigation amounts and crop water use (ET_c) were greater for the conventional hybrid, but grain water use efficiency (WUE) and harvest index were significantly greater for the DT hybrid. In 2014, grain yields and WUE were not significantly different between hybrids. However, irrigation amounts, ET_c and biomass yields were greater for the conventional hybrid. Results from both years indicate that the DT hybrid required less water to maximize grain yield as compared to the conventional hybrid. Producing relatively high yields with reduced amounts of water may provide a means for producers to continue corn production in a semiarid environment with declining water supplies.