Modeling soil water dynamics in a drip-irrigated intercropping field under plastic mulch

Intercropping, drip irrigation, and the use of plastic mulch are important management practices, which can, when utilized simultaneously, increase crop production and save irrigation water. Investigating soil water dynamics in the root zone of the intercropping field under such conditions is essential in order to understand the combined effects of these practices and to promote their wider use. However, not much work has been done to investigate soil water dynamics in the root zone of drip-irrigated, strip intercropping fields under plastic mulch. Three field experiments with different irrigation treatments (high T1, moderate T2, and low T3) were conducted to evaluate soil water contents (SWC) at different locations, for different irrigation treatments, and with respect to dripper lines and plants (corn and tomatoes). Experimental data were then used to calibrate the HYDRUS (2D/3D) model. Comparison between experimental data and model simulations showed that HYDRUS (2D/3D) described different irrigation events and SWC in the root zone well, with average relative errors of 10.8, 9.5, and 11.6 % for irrigation treatments T1, T2, and T3, respectively, and with corresponding root mean square errors of 0.043, 0.035, and 0.040 cm³ cm^?3, respectively. The results showed that the SWC in the shallow root zone (0–40 cm) was lower under non-mulched locations than under mulched locations, irrespective of the irrigation treatment, while no significant differences in the SWC were observed in the deeper root zone (40–100 cm). The SWC in the shallow root zone was significantly higher for the high irrigation treatment (T1) than for the low irrigation treatment, while, again, no differences were observed in the deeper root zone. Simulations of two-dimensional SWC distributions revealed that the low irrigation treatment (T3) produced serious severe water stress (with SWCs near the wilting point) in the 30–40 cm part of the root zone, and that using separate drip emitter lines for each crop is well suited for producing the optimal soil water distribution pattern in the root zone of the intercropping field. The results of this study can be very useful in designing an optimal irrigation plan for intercropped fields.     

专家控制技术在设施园艺中的应用

设施园艺环境有多因素、线性大、时间滞后和不确定性的特点。随着现代化控制技术的发展,专家控制技术可以取得较好的控制效果。为此,介绍了专家控制技术的基本概念和其在温室环境控制中的应用,并叙述了知识库、数据库和推理机的设计过程。     

Crop water requirements for rainfed and irrigated grain corn in China

A basic parametric crop water use model (WATER) that employes climatic and environmental data to calculate temporal and spatial water consumption for a variety of major corps was applied specifically for grain corn to the region of China and Korea to investigate the evapotranspiration (ET) demand on grain corn and the associated irrigation water applications necessary for optimal crop production. A network of 241 stations provided the seasonal climatic input. The climatic input consisted of data averaged over approximately a 20 year period. Among the results, highest ET under full irrigation (first harvest) occurred in the northwestern inland sections of China, whereas least ET was found for the southeast. Under rainfed conditions, the relationship became nearly inverse. In order to achieve optimum crop yields, about 1000 mm of irrigation water was needed in the northwest, contrasted with none required in the south and east of China. A sensitivity analysis was applied to determine the degree of error introduced by faulty or uncertain environmental input data.     

玉米中耕除草复合导航系统设计与试验

为了实现玉米中耕除草过程中的自动导航作业,提高自动除草的效率和准确性,设计了一种玉米中耕除草复合导航系统。系统由基于GNSS的农机自动导航部分和基于机器视觉的农具自动导航部分组成,可通过GNSS位置信息进行农机自动导航,同时根据摄像头获取的玉米作物行信息控制农具铲刀进行行间除草。对农机的转向控制部分和前轮转角检测部分进行了机械改装,以PLC和步进电机驱动器为基础设计了农机转向控制电路和农具液压控制电路;以横向偏差和横向偏差变化率作为模糊控制的输入变量设计了自适应模糊控制方法;采用摄像头获取玉米作物行,通过扫描滤波方法进行作物行检测。农机独立导航除草试验和农机具复合导航试验结果表明：在车速为0.6 m/s时,农机自动导航最大横向偏差为10.04 cm,平均偏差为4.62 cm;农机具复合导航时的最大偏差为6.35 cm,平均偏差为2.73 cm;农机具复合导航系统能较好地满足玉米中耕除草的要求。     

稻谷固定床式深层干燥试验研究

以木反和通风板构建一台面积22．3m^2的固定床干燥机，采用燃油直接燃烧加热的方式对谷物进行干燥。在不同的热风温度、稻谷初始含水率及总厚度条件下，测定了稻谷干燥的均匀性、各层稻谷的温升曲线和干燥曲线，分析了干燥参数对干燥床性能的影响。研究表明：沿层厚方向存在显著的温度梯度，干燥逐层进行。热风温度越高、总厚度越大，分层干燥现象越明显。在定风量的条件下，热风温度要对干燥的热量消耗无明显影响；总厚度增加、稻谷初含水率降低，干燥的热量消耗呈降低趋势。     

在水泵制造企业中应用成组技术

通过水泵生产企业现状的调查分析，在为某水泵厂开发计算机辅助企业现代化管理系统的基础上，提出了水泵生产企业运用成组技术，强化企业内部管理的内容和方法。     

水稻插秧机植物纤维地膜敷设装置开口机构设计

针对自制的水稻插秧机植物纤维地膜敷设装置由秧爪直接进行开口插秧、而导致开口质量较差的问题,利用ADAMS建立了偏心齿轮式分插机构的运动仿真模型,通过轨迹跟踪及逐次逼近的方法确定了开口刀尖点的最优坐标为(-159.8,54.9)。依此建立双臂同步开口机构仿真模型并对开口插秧过程进行了仿真模拟,结果表明机构满足设计要求。最后,对同步开口机构开口刀的装配结构进行了优化设计。     

电动助力转向系统直流伺服技术的研究

针对电动转向系统原有单一控制方式的不足，根据直流脉宽调制伺服系统工作原理，提出了一种带有助力和阻尼两种模式的综合控制方式。通过对两种模式分别进行分析计算，提出了一种针对占空比和控制模式的修正方法。台架性能试验验证表明，采用这种伺服控制方式，电动助力转向系统快速回正时的平稳性有所提高。     

基于Pro/E Wildfire的水泵叶轮精确建模

基于传统的叶片加工方式，从现有的二维水力木模图的型值点出发，基于Pro／E Wildfire软件，采用从点到线、从线到曲面、再从曲面到实体的方法，实现了泵叶轮空间扭曲叶片和圆柱形叶片的三维实体造型，利用制造模具的常用方法实现了泵叶轮和流道的造型，造型方法精确，为后续的流场数值模拟和数控加工奠定了基础。     

朝阳地区干旱特征分析及抗旱对策

朝阳地区位于辽宁省西部，历史上素有“十年九旱”之称，降水量少而集中，所以干旱是制约朝阳地区经济发展的主要自然因素。本文根据辽宁省朝阳地区1961~2000年历年月降水量的实测资料，用降水距平百分率、z指数方法分析朝阳干旱特征，证明：根据降水资料来判断朝阳地区干旱特征是比较准确的。并提出若干抗旱措施—大力推广节水灌溉技术、实施集水节灌农业、大力加强干旱灾害的监测、合理利用水资源。此外，本研究为朝阳地区干旱研究及其治理提供依据。