Viscoelastic Properties of Soil with Different Ammonium Nitrate Addition

Four different soils samples were taken from not cultivated recreational places. Particle-size distribution and pH (in water and in 1 M KCl) of the soil samples were measured. Soil samples were saturated with deionized water and solution of ammonium nitrate with the concentration of 5, 50 or 500 mM for 3 days. The samples were analyzed using dynamic oscillatory rheometer by frequency and strain sweeps. Soil samples were similar to physical gels, as they presented rheological properties between those of a concentrated biopolymer and a true gel. 50 mM concentration of the salt was enough to make changes in the elasticity of the soils. Small concentration of the fertilizer caused weakening of the soil samples structure. Higher concentration of ammonium nitrate caused the increase in the moduli crossover strain value. For the loam sample taken from a playground, with the highest content of the particles <0.002 mm (clay aluminosilicates), the lowest value of strain was observed at the moduli intersection. Lower strain value was necessary for the sliding shear effect of soil A sample effecting transgression to the “flowing” state. Strain sweep moduli crossover point can be used as a determinant of the rheological properties of soil.     

AFLP analysis of genetic diversity in five accessions of Polish runner bean (<Emphasis Type="Italic">Phaseolus coccineus</Emphasis> L.)

Runner bean (Phaseolus coccineus L.) is traditionally cultivated in Poland for dry seeds. The national collection of runner bean maintained in the National Center for Plant Genetic Resources gathers 152 accessions, which are mainly landraces originated in Poland (68%), Ukraine (17%) and Slovakia (10%). The collection contains valuable genetic resources for bean breeders and research. The aim of this study was to describe the level and structure of genetic diversity of three landraces and two commercial cultivars of runner bean from the national collection in order to assess their genetic potential for breeding. Amplified Fragment Length Polymorphism analysis included five combinations of selective primers. Analysis of seven genetic diversity parameters reveled fair amount of genetic variation both in landraces and cultivars. High genetic diversity of commercial cultivars relative those of landraces suggests that the breeding process leading to their release was rather moderate and most likely included domestic gene pool of runner bean. Low gene diversity and low Nei’s genetic distance values as well as intergradations among accessions in the PCoA may indicate reduced variability P. coccineus grown in Poland as a result of its migration pathways.     

Effect of tillage systems on pea crop infestation with weeds

In a multi-year experiment, weed infestation of pea crop in three tillage systems was analyzed: a) conventional tillage (CT), b) reduced tillage (RT), and c) no-tillage (NT), and in two terms: 1) at 2–3 pea leaves stage (23–25 stage in BBCH scale) and 2) at the flat pod stage (75–79 BBCH). Treatments conducted in the CT system included shallow ploughing and pre-winter ploughing in the autumn. In the RT system, both these treatments were replaced by double cultivation, whereas only glyphosate treatment was applied in the NT system. In both terms of weed infestation assessment, the highest number and air-dry weight of weeds were determined in the RT system, lower ones in CT and the lowest ones in the NT system. In the first term, the number of weeds m^?2 in the RT system was higher by 43.9% than in NT and by 26% than in CT system. Also in the second term was the weed number m^?2 in RT higher by 58.6% than in NT and by 27.9% than in CT. Tillage systems differentiated also weed mass in pea crop. In RT, it was 4-fold higher than in NT and over 2-fold higher than in CT.     

Records of Anthropogenic Pollution in Silesia Captured in Scots Pine Tree Rings: Analysis by Radiocarbon,Stable Isotopes,and Basal Area Increment Analysis

Water, Air, &; Soil Pollution - This paper proposes adaptive microwave technologies for assessing the state of water systems. The expected results will allow the rapid assessment of temperature,...     

Analysis of leaf surface sesquiterpenes in potato varieties

A comparative study of potato leaf sesquiterpenes was carried out. GC, GC-MS, and NMR analyses were used to identify and quantify the sesquiterpenes in the leaf surfaces of 10 potato (Solanum tuberosum) varieties. Two sesquiterpene alcohols and 17 sesquiterpene hydrocarbons were identified and quantitatively determined. The distribution of the sesquiterpenes was found to be variety-specific. The sesquiterpene contents of the different potato varieties were subjected to cluster and principal component analyses. The eight potato varieties of the main chemotype cluster were dominated by beta-caryophyllene (9-148 ng/cm2), germacrene D (2-46 ng/cm2), germacrene D-4-ol (0.4-31 ng/cm2), beta-sesquiphellandrene (1-34 ng/cm2), and an unknown sesquiterpene alcohol III (0.2-37 ng/cm2). Chemometric classification distinguished two varieties, Mila and Vistula, from a major cluster. The Vistula variety was distinguished from the others by its high contents of beta-caryophyllene, alpha-humulene, germacrene D, and germacrene D-4-ol and the Mila variety by beta-elemene, trans-alpha-bergamotene, (Z)-beta-farnesene, (E)-beta-farnesene, trans-beta-bergamotene, beta-sesquiphellandrene, and unknown sesquiterpene alcohols I, II, III.     

Zinc Removal from the Aqueous Solutions by the Chemically Modified Biosorbents

Biosorbents are the natural origin adsorbents, which popularity in environmental engineering is steadily increasing due to their low price, ease of acquisition, and lack of the toxic properties. Presented research aimed to analyze the possibility of chemical modification of the straw, which is a characteristic waste in the Polish agriculture, to improve its biosorption properties with respect to removal of selected metals from aquatic solutions. Biosorbents used during the tests was a barley straw that was shredded to a size in the range of 0.2–1.0 mm. The biosorption process was performed for aqueous solutions of zinc at a pH 5. Two different modifications of straw were analyzed: esterification with methanol and modification using the citric acid at elevated temperature. The results, obtained during the research, show a clear improvement in sorption capacity of the straw modified by the citric acid. In the case of straw modified with methanol, it has been shown that the effectiveness of zinc biosorption process was even a twice lower with respect to the unmodified straw. Moreover, it was concluded that the removal of analyzed metals was based mainly on the ion-exchange adsorption mechanism by releasing a calcium and magnesium ions from the straw surface to the solution.

Open image in new window

Graphical Abstract ?

     

Synthetic Iron Oxides for Adsorptive Removal of Arsenic

Removal of arsenic from water reservoirs is the issue of great concern in many places around the globe. As adsorption is one of the most efficient techniques for treatment of As-containing media, thus the present study concerns application of iron oxides-hydroxides (akaganeite) as adsorbents for removal of this harmful metal from aqueous solution. Two types of akaganeite were tested: synthetic one (A) and the same modified using hexadecyltrimethylammonium bromide (A_M). Removal of As was tested in batch studies in function of pH, adsorbent dosage, contact time, and initial arsenic concentration. The adsorption isotherms obey Langmuir mathematical model. Adsorption kinetics complies with pseudo-second-order kinetic model, and the constant rates were defined as 2.07?×?10^?3and 0.92?×?10^?3 g mg^?1 min^?1 for the samples (A) and (A_M), respectively. The difference was caused by significant decrease in adsorption rate in initial state of the process carried out for the sample A_M. The maximum adsorption capacity achieved for (A) and (A_M) akaganeite taken from Langmuir isotherm was 148.7 and 170.9 mg g^?1, respectively. The results suggest that iron oxides-hydroxides can be used for As removal from aqueous solutions.     

Effect of temperature on the respiration rate of forest soil organic layer along an elevation gradient in the Polish Carpathians

The aim of our studies was to determine the relation between temperature and the respiration rate of the forest soil organic layer along an altitudinal gradient while controlling the effects of the soil characteristics. The respiration rate was measured in laboratory conditions at different temperatures, 0, 10, 20, and 30°C, in samples collected in the Polish part of the Western Carpathians at 600, 800, 1,000, and 1,200 m above sea level from four different mountains, which were later treated as replicates. The increase in the average respiration rate between two consecutive temperatures was expressed as Q ₁₀ coefficients. Among the nutrients measured in the soil organic layer, only the total organic N concentration significantly increased with elevation. The temperature effect was significant for both the respiration rate and the Q ₁₀ values. The calculated Q ₁₀ values were highest for the temperature range between 10 and 20°C, and the lowest values were obtained from the highest temperature range (20–30°C). The altitude effect was significant for the respiration rate but not for the Q ₁₀ values, indicating that the temperature sensitivity of the soil respiration did not change much along the studied altitudinal gradient.