Fire resistance of thick wood-based boards

Thick wood-based boards are used as construction materials for walls and floors in Japan. In this study, fire resistance tests (ISO 834-1) and cone calorimeter tests (ISO 5660-1) were conducted for thick plywood, particleboard, and medium density fiberboard with sample thicknesses of about 28–30mm, and their suitabilities for quasi-fireproof or fire-preventive structures were evaluated. In the ISO 834-1 fire resistance test, the heat-shielding performance (insulation criterion) for walls was evaluated and the results showed that the larger the apparent density of a woodbased board, the higher its insulation performance. The insulation performance of thick wood-based boards in the fire resistance test could be forecast from the results of the cone calorimeter test, especially when the second peak of heat release rate appeared. In the cone calorimeter tests, the surface layer density of the plywood, particleboard, and medium density fiberboard was the dominant parameter for the time to ignition and initial heat release rate. These results indicate that thick wood-based board is a suitable fire-preventive construction material. Part of this study was presented at the Annual Meeting of the Architectural Institute of Japan, Hokkaido, Japan, August 2004     

Predicting the humidity control capacity of material based on a linear excitation-response relationship

The Cb value is a useful parameter for estimating the humidity control capacity of materials. It is defined as the ratio of the range of variation of relative humidity in a steel box lined with the material of interest to that in an empty steel box, when sinusoidal temperature variation is applied. However, because it takes a long time to obtain the Cb values for materials at each temperature variation period, we developed an easier method based on a linear excitation-response theory to obtain the Cb values without measuring at each period. Japanese cedar was the material used in this study. The temperature excitation, a jump from a constant temperature to another constant temperature, was used to obtain the absolute humidity response. Under the assumption that the temperature excitation-humidity response relationship is linear, we were able to predict humidity variation to sinusoidal temperature variation at any period, and we obtained the Cb value for each temperature variation period. Predicted values agreed well with the experimental values. From this, it was found that the Cb value could be predicted without measuring the Cb value at each period over a long time. In addition, the peak time difference, which is closely related to the Cb value, could also be predicted in a similar manner.     

alpha-Glucosidase inhibitory profile of catechins and theaflavins

To clarify the postprandial glucose suppression effect of flavonoids, the inhibitory effects of catechins and theaflavins against alpha-glucosidase (AGH) were examined in this study. It was initially demonstrated that theaflavins and catechins preferentially inhibited maltase rather than sucrase in an immobilized AGH inhibitory assay system. For the maltase inhibitory effects of theaflavins, the effects were observed in descending order of potency of theaflavin (TF)-3-O-gallate (Gal) > TF-3,3'-di-O-Gal > TF-3'-O-Gal > TF. This suggests that the AGH inhibition induced by theaflavins is closely associated with the presence of a free hydroxyl group at the 3'-position of TF as well as the esterification of TF with a mono-Gal group. In addition, the R-configuration at the 3'-position of TF-3-O-Gal showed a higher inhibitory activity than the S-configuration. As a result of a single oral administration of maltose (2 g/kg) in rats, a significant reduction in blood glucose level was observed at a dose of 10 mg/kg of TF-3-O-Gal, demonstrating for the first time that TF-3-O-Gal can suppress glucose production from maltose through inhibition of AGH in the gut.     

The effect of active immunization against inhibin on gonadotropin secretions and follicular dynamics during the estrous cycle in cows

The hypothesis of the present study is that active immunization of cows against inhibin would neutralize endogenous inhibin, increase circulating levels of follicle stimulating hormone, and subsequently affect follicular dynamics and the ovulation rate during the estrous cycle. Thirteen cows were immunized against inhibin alpha-subunit and, 6 cows were immunized with a placebo. Both groups were given 4 booster immunizations 7, 14, 21, and 34 weeks after the primary injection. Ovaries were examined daily after the 2nd, 3rd, and 4th booster immunizations by transrectal ultrasonography for 25 days. After the 4th booster immunization, blood samples were collected daily for one complete estrous cycle to measure FSH and LH. The results showed that the immunized cows generated antibodies against inhibin, and that they had higher FSH levels compared with the controls. The number of follicular waves during the estrous cycle was higher in the immunized cows (3 or 4 waves) than in the controls (2 or 3 waves). Moreover, the immunized cows had a greater number of follicles during the estrous cycle compared with the control cows. The maximum number of follicles was 14.8 +/- 1.7 vs 5.4 +/- 0.2 in inhibin-immunized and control cows, respectively, during the first follicular wave and 13.9 +/- 1.9 vs 5.6 +/- 0.7, respectively, during the ovulatory wave. Multiple ovulations were increased in the immunized cows. However, the ovulation rate varied greatly in the immunized animals. In conclusion, immunization against inhibin increased FSH secretions during the estrous cycle in the cows. Moreover, the immunized cows had a greater number of follicular waves during the estrous cycle and a greater number of follicles, and this could be used as a potential source of oocytes for use in IVF/embryo transfer programs.     

The effects of inclusion levels of urea-treated potato pulp silage in concentrate and roughage sources on finishing performance and carcass quality in cull beef cows

An experiment was conducted to determine the effects of inclusion levels of potato pulp silage in concentrate (0, 15, 30 or 45%; on a dry matter basis) and roughage sources (rice straw or wheat straw) on finishing performance and carcass quality of cull beef cows. Sixteen Japanese Black (Wagyu) mature cull cows (490 ± 31 kg of BW) were used in this experiment. Increasing the levels of potato pulp silage in concentrate and roughage sources did not significantly affect feed intake in cows. In addition, the final body weight, daily gain and feed : gain ratio were not influenced by the inclusion levels of potato pulp silage in concentrate and the type of roughage. Increasing the inclusion levels of potato pulp silage in concentrate would probably decrease the marbling score. The L* values of the longissimus muscle (LM) tended to respond quadratically ( P  = 0.078) as the inclusion levels of potato pulp silage in concentrate increased, and was lowest for cows fed the concentrate which included 30% potato pulp silage. The a* and b* values of the LM and fat color were not affected by the inclusion levels of potato pulp silage in concentrate. No effects of roughage sources on finishing performance were observed.     

Active immunization against inhibin improves superovulatory response to exogenous FSH in cattle

The effect of active immunization against inhibin on the response to superovulatory treatment by porcine FSH (pFSH) was investigated in cattle. Japanese black cows were sc injected with 1 mg of porcine inhibin alpha-subunit fragment (1-26) conjugated with rabbit serum albumin (inhibin-immunized group; n=14) or rabbit serum albumin alone (control group; n=12) in Freund's complete adjuvant. Booster injections (half the amount of the primary injection) were given 35 and 70 days after the primary injection. All cows were superovulated three times with pFSH. Three days after each injection of the antigen, a progesterone-releasing intravaginal device (CIDR-B) was inserted vaginally into all animals and left in place for 10 days. Forty-eight hours before CIDR-B removal, all animals were sc injected with 30 mg pFSH dissolved in 40% polyvinylpyrrolidone, and im injected with 750 microg of PGF2alpha at CIDR-B removal. Cows were artificially inseminated twice during estrus, and ova or embryos were collected 7 or 8 days after estrus. The number of corpora lutea, the number of ova or embryos and the number of transferable embryos in inhibin-immunized cows (12.1+/-1.2, 11.1+/-1.3 and 6.2+/-1.0, respectively) were significantly greater than those in the controls (8.2+/-1.0, 5.7+/-1.1 and 3.1+/-0.7, respectively). These results indicate that active immunization against inhibin enhanced ovarian response to the usual superovulatory treatment in cattle. Therefore, immunization against inhibin may be a useful approach for improving the response to superovulation in cattle.     

Changes in hepatic enzyme activities in transgenic mice carrying human prototype c-Ha-ras gene treated with diethylnitrosamine

Activities of malate dehydrogenase (MDH) and aspartate aminotransferase in the malate-aspartate shuttle were significantly increased in the cytosolic fractions of livers with early neoplastic symptoms such as swelling and discoloration in transgenic mice carrying the prototype human c-Ha-ras gene, Tg-rasH2 mice, which were administered with diethylnitrosamine (DEN) as a carcinogenic chemical at a dose of 200 mg/kg body weight. Cytosolic MDH/LDH (lactate dehydrogenase) (ML) ratio increased significantly and was considered to be a useful marker to characterize the energy metabolism at early neoplastic stage in livers of the Tg-rasH2 mice.     

Inhibition of appressorial adhesion of Pyricularia oryzae to barley leaves by fungicides

The effects of rice blast fungicides known to inhibit melanisation or penetration on the adhesion of Pyricularia oryzae to the leaf surface of barley were investigated. Adhering appressoria were counted after shaking inoculated leaves vigorously with water. On untreated leaves, appressoria began to adhere at the time when appressorial melanisation was initiated. The number of adhering appressoria then increased gradually, and most were melanised. On chlobenthiazone-treated leaves, appressoria were not melanised and were easily detached from the surface. Similar results were obtained with tricyclazole. However, after treatment with tetrachlorophthalide or pentachlorobenzyl alcohol, which are also known to prevent penetration of P. oryzae, melanised appressoria still remained after shaking in water. It is suggested that appressorial melanisation in P. oryzae is involved in appressorial adhesion. The antipenetrant action of the melanin biosynthesis inhibitors chlobenthiazone and tricyclazole may be ascribed to the lack of adhesive intensity necessary to support the mechanical shearing of the cuticle of rice plants.     

Improving production systems of timber-processing plants IV: Application of genetic algorithms for appropriate positioning of processing machines

The development of a layout plan for a new plant with the aid of genetic algorithms was studied to place the machines so that the plant floor was effectively utilized and the operation would not be impeded. Genetic algorithms are search algorithms based on the mechanics of natural evolution and natural genetics to solve problems in engineering fields. Simulation with the aid of genetic algorithms was undertaken step by step. The first seven hundred strings (chromosomes) were generated at random to organize an initial population. Each string consisted of 40 bits (genes), which represented characteristics of machines (x- andy-coordinates and inlet and outlet formations of materials on machines) in the binary coding. Then the simulation was undertaken by repeating selection, crossover, reproduction, and mutation of strings until all strings were saturated with the highest evaluation (fitness of chromosomes to environments in the case of creatures). Under some limitations, an acceptable layout plan of the modeled plant involving four wood-processing machines was obtained according to evaluation indices.Part III of this series appeared inMokuzai Gakkaishi 37: 702–710, 1991.Part of this report was presented at the 47^th annual meeting of the Japan Wood Research Society, Kocht, April 1997     

Thermal constants of wood during the heating process measured with the laser flash method

The thermal diffusivity, specific heat, and thermal conductivity of 13 species of wood were measured by means of the laser flash method to investigate the thermal properties of wood during the heating process. The temperature ranged from room temperature to 270°C in air or under vacuum. The thermal diffusivity varied little during the heating process up to 240°C. The values in air were larger than those under vacuum. There was a linear relation between the specific heat and the ambient temperature, and the specific heat under vacuum was larger than that in air at high temperature. The thermal conductivity increased with density and the ambient temperature. To discuss the effects of the atmospheric conditions on the thermal constants of wood, a theoretical model of thermal conductivity was proposed and its validity examined, where the wood was assumed to be a uniformly distributed material composed of cell walls and air.Part of this paper was presented at the 47th annual meeting of Japan Wood Research Society at Kochi, April 1997