Increased grain protein content and its association with agronomic and end-use quality in two hard red spring wheat populations derived from Triticum turgidum L. var. dicoccoides

Suitability of wheat (Triticum aestivum L.) for many food products depends on its unique protein. Elevated grain protein content (GPC) and its quality influences the bread making properties of wheat. The objective of this study was to examine the association of elevated GPC with agronomic and end-use quality in two hard red spring wheat recombinant inbred (RI) populations derived from wild emmer (Triticum turgidum L. var. dicoccoides). The two hard red spring populations (ND683/Bergen and Glupro/Bergen) were developed using a single-seed-descent method. ND683 and ‘Glupro’ are high in GPC (180 g kg^-1), presumably due to the introgression of gene(s) from Triticum turgidum L. var. dicoccoides and ‘Bergen’ is low in GPC (145 g kg^-1). From each of the two populations 12 high- and 12 low-GPC RI lines (F_5:7) were selected for replicated testing at two North Dakota (ND) locations in 1995. In both populations, the high-GPC lines had significantly (p < 0.05) higher values compared to the low-GPC lines for mean GPC and water absorption. Mean grain yield of the high-GPC lines was not significantly different from the low-GPC lines in both populations. In the ND683/Bergen population, the high-GPC lines had significantly (p < 0.05) higher values than the low-GPC lines for mean plant height, days to heading, and flour extraction. GPC was significantly (p < 0.05)and negatively associated with test weight and also significantly (p < 0.01) and positively associated with water absorption in the Glupro/Bergen population. In these populations, results suggested that it may be possible to select lines that combine higher GPC and acceptable yield level, but later in maturity and taller in plant height. This revised version was published online in July 2006 with corrections to the Cover Date.     

Yield and quality of fennel (Foeniculum vulgare Mill.) in relation to basal and foliar application of nitrogen and phosphorus

A split‐plot field trial was conducted to study the effect of foliar application of 0 kg/ha (control), 20 kg N/ha, 2 kg P/ha or 20 kg N + 2 kg P/ha at two basal levels, viz., 90 kg N + 40 kg P/ha (optimal dose) and 60 kg N + 27 kg P/ha (sub‐optimal dose). Each group received 50 kg K/ha, which was applied uniformly on the yield and quality of fennel. Spray was applied at the flowering stage, 120 days after sowing.

The optimal basal dose gave better results than did the sub‐optimal one. Spray of 20 kg N + 2 kg P/ha proved optimum. This spray proved more effective at sub‐optimal than at optimal basal dose. The percentage of anethole (but not of fenchone) in the essential oil was significantly higher in plants grown with the sub‐optimal basal dose. Foliar application of N, P and N + P, on the other hand, decreased the anethole content of oil and increased that of fenchone significantly. Hence, foliar feeding may be recommended if the oil is required for perfumery and confectionary industries.     

Boron Induced Oxidative Stress,Antioxidant Defence Response and Changes in Artemisinin Content in Artemisia annua L.

Boron is an essential plant micronutrient and the range between deficient and toxic levels of boron is narrow for most of the plants. Like other elements, boron becomes toxic to growth at high concentrations. High boron concentrations in soil reduce crop productivity in many areas of the world. The effect of increasing levels of boron (0, 0.50, 1.00, 1.50, 2.00 mm ) on oxidative stress, antioxidant defence response and changes in artemisinin content in Artemisia annua were investigated in the present study. Boron toxicity reduced the growth parameters viz. stem height, fresh weight and dry weight. Treatments induced oxidative stress resulting in lower net photosynthetic rate, stomatal conductance, internal CO₂ and total chlorophyll content. The increased activities of antioxidant enzymes like CAT, POX and SOD were also noted in response to increasing levels of boron stress. However, H₂O₂ and artemisinin content were found to be high up to 1.00 mm concentration of boron compared to control, and on applying higher doses, further reduced contents were obtained. Thus, the results suggest that a mild stress of boron can be utilized for enhanced artemisinin production.     

Structured analysis of seepage losses in irrigation supply channels for cost-effective investments: case studies from the southern Murray-Darling Basin of Australia

Much of inland Australia has been in perpetual drought since 1997 except during 2010 when above average rainfall occurred. It has been the worst drought since 1788 when European settlement began. Water scarcity poses a serious threat to the sustainability of the irrigated agriculture in major irrigation systems across the Murray-Darling Basin (MDB). There is a need for water-saving measures and a structured approach to assess water loss in earthen supply channels. This paper presents such an approach to assess and reduce seepage losses for improving irrigation efficiencies. Main elements of this approach are the following: field measurements, hydrologic modelling, potential options for seepage reduction, economic analysis and financing water-saving investments. Using data from two irrigation systems in the southern MDB, a case is made for reducing seepage water losses in irrigation supply channels in a cost-effective manner using low-cost technologies. Increasing the level of security for investments in water-saving programs provides incentives to key stakeholders to achieve water-saving targets. Considering the value of water recovered from reducing seepage loss at irrigation system level, this study demonstrates how reducing just one component (seepage) from the total water losses in irrigation systems can help improve water supplies as well as the environmental flows. Potential options for financing infrastructure improvement for saving irrigation water are proposed and discussed.     

Effects of seasonal changes on the population levels of some plant-parasitic nematodes in the plantations of Pinus caribaea and P. oocarpa in the savanna areas of Nigeria

The mean values of the total number of nematodes found in each of four pine plantations in Nigeria were depressed during the dry season to a minimum between March and April. A gradual increase in the population started from June–July, and the population reached its peak in August–October. The seasonal decline in nematode population coincided with the period of low soil moisture. An important ecological factor affecting population changes in the selected plantations was the vegetation cover; while a gradual decline in nematode population was observed in the 1968, 1974a and 1974b plantations, which have a full canopy, a sharp decline in nematode population was observed in the 1982 plot, which did not have a complete canopy. Populations of some nematode genera, such as Rotylenchus spp., Criconemella spp., Coslenchus spp. and Triversus spp., declined to zero in this last plantation.     

Incidence of dieback disease following fungal inoculations of sexually and asexually propagated shisham (Dalbergia sissoo)

Shisham (Dalbergia sissoo) is an important multipurpose tree with great economic importance, but this tree has been devastated by dieback disease. Seedlings and asexually propagated (cuttings) plants were artificially inoculated with four fungi (Fusarium solani, Botryodiplodia theobromae, Curvularia lunata and Ganoderma lucidum) to evaluate the potential role of these fungi in shisham dieback disease. Results at 2 years revealed that highest disease was caused by inoculation of F. solani (31.39%), followed by B. theobromae (19.042%) and C. lunata (12.22%), but no dieback disease was caused by G. lucidum. During both years, seedlings exhibited greater susceptibility to disease (17.24%) compared to cuttings (7.83%). In particular, F. solani caused more disease in seedlings (46.18%) compared to cuttings (16.61%). With the F. solani inoculations, maximum disease rate was observed at 8 weeks post‐inoculation both in seedlings (77%) and in cuttings (31%), but the maximum disease increase was observed at 4–5 weeks post‐inoculation. Analysis of variance showed significant differences among the different fungi and also between seedlings and cuttings. F. solani can be considered as a major fungal pathogen contributing to dieback disease of shisham, and asexual propagation can reduce the severity of dieback.     

Molecular phylogeny and pathotyping of Fusarium solani: a causal agent of Dalbergia sissoo decline

Sissoo (Dalbergia sissoo), commonly known as shisham, is amongst the finest woods of South Asia, but ‘wilt’ disease has caused a rapid decline in this species. The cause of the disease remains uncertain. The aim of this study is to identify the causal agent of the disease and characterize isolates made from diseased trees, based on genomic data and variations in virulence. Samples of infected roots, stems and the ooze exuded from infected trees were obtained from plants showing symptoms in different geographical regions of India for the isolation of microorganisms. Isolates were used to inoculate healthy plants. Based on the morphological characteristics, genus‐ and species‐specific PCR, and in silico analysis of 5.8S rDNA‐ITS regions, of the 38 fungal isolates, 24 and 14 were identified as Fusarium solani and Fusarium sp., respectively. In a pathotyping study, eighteen F. solani isolates, isolated from roots and stem parts of symptomatic plants, induced typical wilt symptoms when inoculated through soil and roots on D. sissoo seedlings of 1–15 months in age. The population of F. solani was the highest in infected roots and the lowest in parts of stems, gradually decreasing with height, and was isolated constantly up to approximately 40% height of the seedling. F. solani isolates used in inoculations were successfully re‐isolated from the rhizosphere, infected roots and wilted stems, as confirmed using isolate‐specific DNA fingerprints. Molecular phylogenies based on rDNA‐ITS sequences showed that the 38 isolates fell into 2 groups. Group I comprised of F. solani isolates from D. sissoo and F. solani sequences in the NCBI GenBank database, whereas group II included Fusarium isolates other than F. solani. These results are helpful in developing integrated control measures for this highly variable pathogen and to establish a base for future population studies.     

Production, Economics, Employment Generation and Marketing Pattern of Rattan-Based Cottage Enterprises: A Case Study from an Urban Area of North-Eastern Bangladesh

Rattan, an important non-timber forest product, is a flexible palm used in weaving baskets or furniture. Rattan is light yet sturdy, making it suitable for furniture that can be moved often. Bangladesh has a large number of rattan-based enterprises. This paper reports a case study carried out in Sylhet City Corporation of north-eastern Bangladesh, exploring the production, financial profitability and marketing of rattan-based products, and the problems and priorities of rattan-based enterprises as well as their potential contribution to employment opportunity. A sample survey was conducted of 58 randomly selected rattan-based enterprises with entrepreneurs personally interviewed using a semi-structured questionnaire. Based on the total investment, the enterprises were divided into large, medium and small categories. Three origins of rattan (Local, Myanmar and Indonesia) and five species were used by the enterprises to produce 29 rattan-based product types. Rattan products were divided into three basic categories, viz. domestic utensils, domestic decorative articles and others for which uses are not specific. Among the three rattan origins, processing cost of local and Myanmar rattan species products was less and more articles were sold than for Indonesia rattan species. Financial analysis indicated that rattan-based enterprises are a profitable and attractive option for local socio-economic development. Entrepreneurs’ views on major problems and issues in rattan-based product trading and suggested measures to improve the condition of rattan-based enterprises also collected. Rattan-based enterprises will generate more domestic revenue, foreign exchange and employment if policies are adopted to provide the enterprises with a reliable source of raw materials and technical and financial assistance from Government to NGOs to sell the products, and expand market facilities in both local and international markets.     

Antifilarial activity of Azadirachta indica on cattle filarial parasite Setaria cervi

Alcohol and aqueous extracts of flowers of Azadirachta indica were tested in vitro for their potential antifilarial activity against whole worm, nerve muscle (n.m.) preparation and microfilariae of Setaria cervi. The effects of alcohol and aqueous extracts were similar in nature on the spontaneous movements of whole worm and nerve muscle preparation. On the whole worm, the response was characterized by initial increase in tone, rate and amplitude of contractions followed by reversible paralysis. The initial stimulant effect is likely to be due to irritant effect on the cuticle. Nerve muscle preparation responded to both extracts by inhibition of spontaneous movements followed by reversible paralysis; initial stimulation phase was absent. The inhibition was concentration related. Alcohol and aqueous extracts had almost similar lethal effect on the microfilariae of S. cervi, the LC50 being 15 and 18 ng/ml, respectively.