Automatic detection of a damaged cutting tool during machining I: method to detect damaged bandsaw teeth during sawing

This paper presents an on-line method for detecting damaged teeth in the bandsaw using acoustic emission (AE) signal energy. The method is based on an analysis of differences in AE energies generated by normal and damaged teeth during sawing. Because of the difference in the amount of sawing, the AE energy was low for sawing by the damaged tooth and high for sawing by the normal tooth immediately after the damaged tooth. The ratio of AE energy for two successive teeth — a normal tooth immediately following a damaged tooth — was much greater than 1, whereas the ratio of AE energy for two successive normal teeth was close to 1. The results demonstrate that the technique using the AE energy ratio for two successive teeth is effective for on-line detection of damaged bandsaw teeth.Part of this paper was presented at the 9th Annual Meeting of the Chugoku Skikoku Branch of the Japan Wood Research Society, Tottori, October 1997     

Effect of oral administration of 3,3',4,4',5-pentachlorobiphyenl on the intestinal microbiota of Sprague–Dawley rats

The effect of the endocrine-disrupting chemical 3,3',4,4',5-pentachlorobiphyenl (PCB 126) on intestinal microbiota after oral administration, and the improvement of intestinal microbiota and feces quantity by the subsequent administration of Lactobacillus acidophilus or Lactobacillus reuteri was investigated. All the rats were given 100 μg/kg bodyweight of PCB 126. The changes in bacterial counts were confirmed using a culture method. The administration of PCB 126 tended to decrease the bacterial counts of lactobacilli (10^9.6−10^10.2 to 10^8.8−10^9.2) and bifidobacteria (10^5.3−10^6.1 to 10^3.6−10^4.2), and to increase those of Enterobacteriaceae (10^8.2−10^9.1 to 10^9.4−10^10.3) and staphylococci (10^6.6−10^7.4 to 10^7.2−10^8.4) compared to no PCB 126 administration. After administration of PCB 126, L. acidophilus or L. reuteri orally administered to rats caused Enterobacteriaceae and staphylococci counts to decrease, suggesting that the intestinal microbiota was improved by the lactobacilli. The administration of L. acidophilus and L. reuteri improved the balance of intestinal microbiota, and defecation volume returned to its normal level. L. acidophilus and L. reuteri have a remedial effect on intestinal microbiota affected by PCB 126 and can function to lessen accumulated PCB 126 volume.     

Effects of rumen‐protected methionine on milk production in early lactation dairy cattle fed with a diet containing 14.5% crude protein

We evaluated the influence on milk production of feeding early lactation cows a diet that included 14.5% crude protein (CP) and that did not meet methionine (Met) requirements or that met them by supplying rumen‐protected Met (RPMet). Thirty‐nine multiparous Holstein cows were allocated into two groups. For 15 weeks after calving, each group was fed one of the two total mixed rations, Control (n = 20) or Treatment (n = 19). The Treatment group received added RPMet at 0.034% (8 g/day) of the Control diet on dry matter basis. The adequacies of Met for the Control and Treatment groups were 96% and 106%, respectively, and for other amino acids, >110%. The CP level (14.5%) was 1 percentage point lower than that recommended by the Japanese Feeding Standard (2006). No between‐group differences were found in milk yield (40 kg/day), milk composition, plasma profile, rumen fermentation, nitrogen balance, or cow health. Met intake and the amount of rumen‐undegradable feed Met were higher in the Treatment group (p < 0.05). Microbial Met and total metabolizable Met did not differ between groups. Supplying RPMet in a 14.5% CP diet during early lactation did not dramatically affect milk production, because the amount of total metabolizable Met was unchanged.     

The in vitro antioxidant properties of alcalase hydrolysate prepared from silkie fowl (Gallus gallus) blood protein

Two types of proteins including blood plasma protein and blood cell protein were isolated from silkie fowl (Gallus gallus) blood and hydrolyzed using alcalase for 0, 2, 4 and 6 h. The blood plasma protein hydrolysate (BPH) and blood cell protein hydrolysate (BCH) were analyzed for pH value, peptide content and antioxidative properties. The significantly higher peptide contents were observed in BPH than that of BCH, which showed that blood plasma protein was more suitable to hydrolysis by alcalase than blood cell protein. Both BPH and BCH showed strong 2,2‐diphenyl‐1‐picrylhydrazyl (DPPH) radical‐scavenging activity and Fe²⁺ chelating ability. BPH at 4 h of hydrolysis (BPH4) demonstrated significantly higher antioxidant capacity than those treated by alcalase in most of the assays. The BPH4 was separated using ultra‐filtration and assessment of the fractions and indicated that low molecular weight of peptides (< 3 kDa) possessed greater DPPH scavenging activity, Fe²⁺ chelating ability and inhibitory activity of lipid peroxidation. These results show that BPH has the potential to be ingredients in the food industry as a replacement of synthetic antioxidants.     

Correction to: Dispersion and degradation of environmental DNA from caged fish in a marine environment

Fisheries Science - In the original publication the text in right column of page 330, the sequences of primers were incorrectly published as.     

Performance of coated carbide tools when grooving wood-based materials: effect of work materials and coating materials on the wear resistance of coated carbide tools

This paper presents the performance of coated carbide tools when grooving various density hardboards and wood-chip cement boards. Work materials of low density (about 0.8g/cm³) and high density (about 1.2g/cm³) were tested. The coating materials studied were chromium carbide, titanium carbonitride, and titanium carbide, which were synthesized on P30 carbide substrate using a chemical vapor deposition method; titanium nitride, chromium nitride, and titanium carbonitride were synthesized using the physical vapor deposition method. Cutting tests were performed during grooving at a cutting speed of 1000m/min and a feed rate of 0.1 mm/rev. The results of the study show that the coated carbide tools are more advantageous in reducing the progression of tool wear and retaining lower normal force and noise level when cutting both hardboard and wood-chip cement board of high density than was the uncoated carbide tool. The wear rate of the coated carbide tools for the wood-chip cement board increased more rapidly than that of the hardboard with increasing densities. Though the coated carbide tools suffered more wear with the low-density wood-chip cement board than with hardboard, their normal force and noise level were always lower for the low-density wood-chip cement board.Part of this paper was presented at the 11th Annual Meeting of the Chugoku Shikoku branch of the Japan Wood Research Society, Matsue, Shimane, September 25, 1999     

Effects of chemical treatments on ultra-high-yield pulping 1. Fiber separation

Summary Specially designed wood blocks from Norway spruce were used to study the nature of the fracture surfaces developed in shear using a tensile tester. In the case of the control (water-soaked blocks), the fracture in the latewood takes place mainly in the S₁ layer while in the earlywood the fracture occurs across the double cell wall. After dilute alkali treatment, some earlywood cells also fracture in the S₁ layer. For sulfite-treated samples, on the other hand, both earlywood and latewood fracture in the middle lamella.Financial support from the Empire State Paper Research Associates (ESPRA) is greatly appreciated     

Change in river water chemistry as affected by the confluence of forest drainage water in dairy farming area on Hokkaido Island, Northern Japan

We evaluated i) the difference in river water chemistry between a watershed mainly consisting of pasture and a watershed mainly consisting of forest, and ii) how the chemistry of river draining the pasture is influenced by that of the river draining the forest. We selected one river (designated as the T-river) draining the pasture (3,587 ha), and two rivers draining a forest (738 and 879 ha) in eastern Hokkaido, northern Japan. During higher river flow due to precipitation and thawing, the concentrations of NO ₃ ⁻ , SO ₄ ²⁻ , K⁺, Fe, and Al increased, suggesting the relative importance of the shallow soil layer as their source. On the other hand, Na⁺, Mg²⁺, Ca²⁺, and Si decreased, suggesting the relative importance of the source in a deep soil layer. The concentrations of NO ₃ ⁻ , Cl⁻, SO ₄ ²⁻ , K⁺, Na⁺, Mg²⁺, Ca²⁺, and Fe were higher in the T-river than in the forest drainage waters, suggesting the contribution of the excretion components from the milk cows. The Si concentration exhibited the opposite pattern. The concentrations of NO ₃ ⁻ , Cl⁻, SO ₄ ²⁻ , K⁺, Na⁺, Mg²⁺, Ca²⁺ (p<0.001), and Fe (p<0.05) in the T-river decreased after the confluence of the forest drainage waters, while Si concentration increased (p<0.001). The reason for the change in river chemistry was the confluence of the forest drainage waters. These findings suggested the environmental role of the forest in the dilution of the polluted river. Prof. S. Ohata, and Prof. H. Takeda, Graduate School of Agriculture, Kyoto University, facilitated this study. Prof. T. Sakai, Graduate School of Informatics, Kyoto University, offered this study some convenience. Dr. M. Sakimoto, and Dr. M. Katsuyama, Graduate School of Agriculture, Kyoto University, offered useful advise.     

Volatile organic compounds from wood and their influences on museum artifact materials II: Inference of causal substances of deterioration based on intercomparison of laser Raman spectra of deteriorated products

Volatile organic compounds (VOCs) from wood and their effects on artifacts are of intense interest to museum staff who must strictly manage the preservation environment. In this study, the causal substances of deterioration were inferred by comparison with laser Raman (LR) spectra of deterioration products. The artifact samples were deteriorated using VOCs from woods (WV test), and using specific substances that occur in wood VOCs (SV test). The deteriorated samples were analyzed by LR spectroscopy and the results of the WV and SV tests were compared. Hinokitiol and acetic acid were found to be two of the main causal substances of deterioration in western red cedar. Deterioration of iron and copper by spruce did not appear to be caused by acetic acid, as is generally assumed, but by some other unknown compound(s). Sensitivity to wood-based VOC components depended on the type of artifact. In western red cedar, mitsudasou (litharge) was very sensitive to acetic acid, while other artifacts were sensitive to hinokitiol. The LR method used in this study is very useful for the inference of causal substances of deterioration based on the detection of small amounts of deteriorated products such as those generated by deterioration due to wood VOCs. Part of this article was presented at the 25th Annual Meeting of the Japan Society for the Conservation of Cultural Property, Kyoto, June 2003