Diatomaceous earth as an inorganic additive to reduce formaldehyde emissions from particleboards

The presented research is about the use of a new type of a functional inorganic additive in particleboards, for the purpose of reducing free formaldehyde releases. One-layered particleboards were prepared in the laboratory by mixing industrial wood particles and urea-formaldehyde resin. Natural, abundantly and cheaply available nano-mesoporous diatomaceous earth (DE) was used, without and in combination with urea as a scavenger. Silica quartz sand was also added as a nonporous analogy. Particleboards were pressed at two press factors (9 and 15 s/mm). Formaldehyde release was determined using the rapid 3-hour-flask method (DIN EN 717-3). As a result, DE additions insignificantly reduced bending properties of particleboards. Internal bonding was in part significantly lowered. The particleboard produced with 3% urea loaded on 5% DE prior to application almost halved (–45%) the formaldehyde release. Formaldehyde release was on the average 17% lower when pressed at 15 s/mm instead of 9 s/mm. By loading urea onto the nano-mesoporous structure of DE, an improved scavenging function of urea could be shown.     

Review of state-of-the-art decision support systems (DSSs) for prevention and suppression of forest fires

Forest ecosystems are our priceless natural resource and are a key component of the global carbon budget. Forest fires can be a hazard to the viability and sustainable management of forests with consequences for natural and cultural environments, economies, and the life quality of local and regional populations. Thus, the selection of strategies to manage forest fires, while considering both functional and economic efficiency, is of primary importance. The use of decision support systems (DSSs) by managers of forest fires has rapidly increased. This has strengthened capacity to prevent and suppress forest fires while protecting human lives and property. DSSs are a tool that can benefit incident management and decision making and policy, especially for emergencies such as natural disasters. In this study we reviewed state-of-the-art DSSs that use: database management systems and mathematical/economic algorithms for spatial optimization of firefighting forces; forest fire simulators and satellite technology for immediate detection and prediction of evolution of forest fires; GIS platforms that incorporate several tools to manipulate, process and analyze geographic data and develop strategic and operational plans.     

Effects of understorey vegetation on tree establishment and growth in a silvopastoral system in northern Greece

The interaction between understorey plants and trees in a young silvopastoral system was studied in a sub-humid Mediterranean environment with cold winters in northern Greece. The experimental design was a split-split plot with three replications and included: three understorey treatments (grass, legume and control), two tree species (Acer pseudoplatanus and Pinus sylvestris) and two spacings (2.5×2.5 m and 3.5×3.5 m). The competition between herbaceous plants and trees resulted in significant differentiation in tree growth while their spacing did not produce any significant differences. The influence of trees on herbage yield either by plant species or spacing was not significant. During the early stages of establishment, a significant positive correlation was observed between sycamore growth and soil moisture, leaf weight, leaf area and leaf number as well as nitrogen and potassium concentration in leaves. Six years after planting the height increase of the sycamore trees was largest in the control treatment (415%), lowest in the grass treatment (134%) and intermediate (192%) in the legume treatment. Much higher was the increase obtained for the diameter, 161%, 207% and 536% respectively for the grass, legume and control treatments. The Scots pine trees grew faster than sycamore over the course of the experiment. Height increased by 397%, 351% and 400% and diameter by 518%, 443% and 683% respectively for the grass, legume and control treatments. This revised version was published online in June 2006 with corrections to the Cover Date.     

Resistance of bamboo scrimber against white-rot and brown-rot fungi

ABSTRACT

Bamboo scrimber is one of the most emerging structural materials for future building applications and it possesses properties comparable to other natural wood-based engineered materials such as glulam, laminated veneer lumber and cross-laminated timber. The goal of this work was to study the decay resistance of bamboo scrimber against white-rot (Trametes versicolor) and brown-rot fungi (Serpula lacrymans). Bamboo scrimber samples were incubated in petri dishes with the wood-decaying fungi and the weight loss after 12 weeks was measured. The surface morphology of fungal-degraded bamboo scrimber was evaluated using optical microscopy. Based on the percentage weight loss, bamboo scrimber could be classified as highly resistant against bio-deterioration by white and brown-rot fungi.     

Do genetic diversity patterns of soil ammonia-oxidizing microorganisms (AOM) match the habitat types of the NATURA2000 scheme?

Journal of Soils and Sediments - Despite the important role of soil ammonia-oxidizing microorganisms (AOM) in the biogeochemical cycle of nitrogen, a unified view of the factors driving their...     

Impregnation of Bombax ceiba and Bombax insigne wood with a N-methylol melamine compound

Methylated N-methylol melamine (NMM) is known for its ability to enhance physico-mechanical properties, anti-fungal ability, and hydrophobicity and was therefore used to impregnate two less used and non-durable wood species from Myanmar, Bombax ceiba and Bombax insigne. Solution uptake, weight percent gain and nitrogen content were increased by increasing melamine concentrations with B. ceiba always achieving higher values compared with B. insigne. According to the leaching results, a higher degree of condensation after curing as well as a better crosslinking of NMM could be obtained at higher temperatures. However, both curing temperatures used (90 and 120 °C) resulted in almost the same amount of nitrogen fixed in the cell wall. UV microspectrophotometry confirmed the penetration of the NMM into different morphological regions of wood tissues, which was again supported by the analysis of point measurement spectra of treated and untreated specimens.     

Interrelationship among and repeatability of seven stability indices estimated from commercial cotton (<Emphasis Type="Italic">Gossypium hirsutum</Emphasis> L.) variety evaluation trials in three Mediterranean countries

Multi-environment trial data are required, to obtain variety stability performance parameters as selection tools for effective cultivar evaluation. The interrelationship among seven stability parameters and their association with mean yield, along with the repeatability of these parameters across consecutive years was the objective of this study. Cottonseed yield data of 31 cotton cultivars, proprietary of Delta and Pine Land Co and other companies, evaluated in 20 locations over the 1999–2005 year period in Greece, Spain and Turkey were used for combined analysis of variance in four datasets. Across locations in a single evaluation year (dataset A), across locations in each of two single consecutive evaluation year (dataset B), across locations and two consecutive years (dataset C) and across locations and three consecutive years (dataset D). For each dataset, cultivar phenotypic variance was appropriately partitioned in its components and the h² and component estimated. Furthermore, following the appropriate stability analysis and AMMI1 along with the GGE Biplot distance (GGED) and instability (GGEIN) parameters were obtained. The interrelationship among the parameters and their association with mean yield based on Spearman rank correlation was studied in each of the seven single evaluation years (dataset A). Rank correlation coefficients were also used as estimates of the repeatability of these stability parameters across consecutive year combinations (dataset B, C and D). The parameters GGED and YS_i were consistently highly correlated with each other and mean yield in five out of seven single evaluation years. The data provided evidence that single year evaluation across locations might be sufficient to reliably rank cotton cultivars, based on mean yield along with GGED and YS_i. Combined analysis across two consecutive years (dataset C) was more effective as compared to single year evaluation. GGED was relatively more repeatable than YS_i and mean yield in single (dataset B) and 2-year comparisons (dataset C). Although GGED is an index depended and proportional to yield, provides a superior way to integrate mean performance and stability into a single measure, which can be assessed visually on biplots. Regarding the other stability parameters, the results were contradicting and of low repeatability across single years and two consecutive years. Cultivar evaluation combined across locations in 3 years did not improve the repeatability of cultivar variance effects but resulted in very high repeatability of GGED, YS_i and mean yield.     

Effects of chemical modification with glutaraldehyde on the weathering performance of Scots pine sapwood

Scots pine sapwood was treated with glutaraldehyde (GA) in aqueous solution using magnesium chloride as a catalyst in order to evaluate the durability towards weathering. Infrared spectroscopy suggested that GA treatment increased the photo-stability of lignin during artificial weathering of micro-veneers in a QUV over 168?h; photo-protection increased with increasing GA concentration. In comparison with the unmodified controls, GA-modified pine micro-veneer strips exhibited a lower tensile strength loss measured in a zero-span mode in the course of weathering. During 18?months of outdoor exposure, GA-modified pine wood boards exhibited a lower moisture content and water uptake than the unmodified ones. GA treatment also clearly restricted the penetration of blue stain fungi into deeper layers of wood. On the macroscopic scale, the surface of the GA-modified boards was significantly smoother due to less erosion, cracking and minor peeling of tracheids. Scanning electron microscopy further revealed that individual tracheids were detached from the cell compound and then washed away from the unmodified wood surface, whereas tracheids on surfaces of GA-modified wood remained in the tissue compound but displayed many axial and transversal cracks.     

Growth,forest floor,and soil chemical analysis comparison between two management practices in chestnut forests of Greece

The effects of management mode and intensity both on growth parameters (diameter and height of sprouts) and soil fertility were studied in experimental plots in coppice chestnut forests of Athos and Pelion mountains – Greece. The empirical management practice applied in Athos is intensive with a rotation period every 20–22 years, including removal of timber products during selective loggings and final clear-cut loggings. The management type applied in Pelion by the Forest Service is more flexible (much longer rotation period) with remaining in situ of plant residues. The soils of both areas were originated by the same parent material (gneiss), they have loamy texture, similar bulk density values, and they are acidic. Higher values of diameter and height of sprouts were observed in Athos compared to Pelion (statistically significant differences). Pelion soils presented higher levels of soil fertility, i.e., in forest floor higher organic matter and nutrients content (significant differences for P, Ca, Na, Cu, and Mn), and in soil higher levels of N, Ca, Na, Fe, Cu, Zn, Mn and organic matter (significant differences for N, Cu, Mn, and organic matter). The findings of this work could be an important tool to the perspective of chestnut forests management practices.