Comparing floristic composition in treefall gaps of certified, conventionally managed and natural forests of northern Honduras

? Forest certification sets requirements for minimizing the impacts of logging on the natural structure and floristic composition of forests.

? We assessed the impact of certification by comparing the floristic composition of 52 taxa of trees and shrubs in the treefall gaps of certified, conventionally managed and protected forests in northern Honduras.

? The highest abundance of light-benefiting taxa was found in certified forests, whereas conventionally managed forests were floristically more similar to natural forests. The environmental conditions measured in certified gaps were not favourable for a natural forest floristic composition.

? Past logging may have altered the species composition in certified forests relatively more than in conventionally managed forests. This implies that the need for restoration operations should be considered in certification requirements, along with landscape-level planning to enhance post-logging recovery.

     

The long-term effects of catchment liming and reduced sulphur deposition on forest soils and runoff chemistry in southwest Sweden

Whole catchment liming or forest liming has been proposed and implemented as a countermeasure to the effects of elevated sulphur deposition. Since the end of the 1980s the Swedish Forest Agency has undertaken experimental forest liming experiments in selected catchments in southern Sweden. These studies were with low doses (3 tonnes ha⁻¹) of lime (CaCO₃) and dolomite (CaMg(CO₃)₂). Data from both soil samples and stream water samples have been collected for the 16 years following treatment. The stream data has been complemented with data from untreated catchments, from the Swedish monitoring stream network. Significant differences due to treatment were seen for Ca, cation exchange capacity (CEC) and base saturation (BS) in the humus layer, none of these variables showed a statistically significant change in the mineral soil due to treatment alone. Soil samples from both the treated and untreated sites showed temporal changes in both the humus layer and the mineral soils with increases in pH, Ca and CEC and decreases in BS and Al which were independent of treatment. A combination of treatment and time, gave significant changes in BS and TA down to 10 cm in the mineral soil. In the stream water samples no statistically significant differences were observed between treated and untreated sites. Regardless of treatment, the streams exhibited a general pattern of declining concentrations of SO₄, Ca, sum of base cations (BC) and increasing acid neutralizing capacity (ANC). In summary, the application of a low dose of lime (3 tonnes ha⁻¹) did not result in significant changes in surface water chemistry in the study catchments and changes in soil chemistry were mainly restricted to the humus layer during the 16 years following treatment. The natural recovery, as a result of reductions in sulphur deposition, dominated the effects and was clearly seen in both the treated and untreated study sites. MAGIC simulations indicate that this recovery will continue in the coming decades.     

Isolation and characterisation of water soluble polysaccharides from Norway spruce and Scots pine

Water soluble polysaccharides from Norway spruce, Scots pine, and Siberian larch were compared. For all species the total amount of polysaccharides isolated from the heartwood was higher than that from the sapwood. The heartwood polysaccharides had a high content of galactose and arabinose units, and some glucuronic acid units, suggesting the presence of acidic arabinogalactans. The total amounts of recovered water-soluble arabinogalactans were 1.9 mg/g for spruce heartwood, 5.3 mg/g for pine heartwood, and as much as 106 mg/g for larch heartwood. The other water-soluble polysaccharides were mainly glucomannans. The average ratio of Gal:Ara:GlcA in the water-soluble arabinogalactans of spruce heartwood was about 4.3:1:1, pine heartwood about 4.5:1:0.2, and larch heartwood about 6.7:1:0.1. The corresponding molar ratios then being about 3.6:1:0.8 for spruce, 3.8:1:0.2 for pine, and 5.6:1:0.08 for larch. Thus, the content of glucuronic acid units was especially high in the spruce heartwood arabinogalactans. The content of arabinose was slightly higher in spruce and pine than in larch heartwood arabinogalactans.     

Long-term impact of fertilization on activity and composition of bacterial communities and metabolic guilds in agricultural soil

To explore long-term impact of organic and inorganic fertilizers on microbial communities, we targeted both the total bacterial community and the autotrophic ammonia oxidizing bacteria (AOB) in soil from six treatments at an experimental field site established in 1956: cattle manure, sewage sludge, Ca(NO₃)₂, (NH₄)₂SO₄, unfertilized and unfertilized without crops. All plots, except the bare fallows, were cropped with maize. Effects on activity were assessed by measuring the basal respiration and substrate induced respiration (SIR) rates, and the potential activity of the AOB. To determine the bacterial community composition, 16S rRNA genes were used to fingerprint total soil communities by terminal restriction fragment length polymorphism analysis and AOB communities by denaturing gradient gel electrophoresis. The fertilization regimes had clear effects on both activity and composition of the soil communities. Basal respiration and r, which was kinetically derived as the exponentially growing fraction of the SIR-response, correlated well with the soil organic C content (r=0.93 and 0.66, respectively). Soil pH ranged from 3.97 to 6.26 in the treatments and was found to be an important factor influencing all microbial activities. pH correlated negatively with the ratio between basal respiration and SIR (r=0.90), indicating a decreased efficiency of heterotrophic microorganisms to convert organic carbon into microbial biomass in the most acid soils with pH 3.97 and 4.68 ((NH₄)₂SO₄ and sewage sludge fertilized plots, respectively). The lowest SIR and ammonia oxidation rates were also found in these treatments. In addition, these treatments exhibited individually different community fingerprints, showing that pH affected the composition of AOB and total bacterial communities. The manure fertilized plots harbored the most diverse AOB community and the pattern was linked to a high potential ammonia oxidation activity. Thus, the AOB community composition appeared to be more strongly linked to the activity than the total bacterial communities were, likely explained by physiological differences in the populations present.     

Water retention characteristics of coarse porous materials to construct purpose-designed plant growing media

ABSTRACT

Among potential components to construct Technosols for urban greening purposes, the commercially available geogenic coarse porous materials (CPMs) are mainly used in practice because of their high porosity. However, the knowledge of the hydraulic behavior of CPMs as well as of their mixtures with other substrates is limited, provoking their suboptimal usage. Therefore, we determined the water retention characteristics, including the available water capacity (AWC) of six geogenic CPMs: porlith, expanded shale, expanded clay, tuff, pumice, and lava. In order to obtain the water retention characteristics of the CPMs as well as of their mixture with sand (1:4 per volume), the following methods adapted from soil physics were applied over a wide range of pressure heads: Equi-pF apparatus, ceramic tension plates, pressure plate extractors, WP4C apparatus, and water vapor adsorption. The results were used to parametrize the modified Kosugi model (using SHYPFIT 2.0). Porlith and tuff have the highest AWC (0.37 m³ m^?3 and 0.17 m³ m^?3, respectively) and are the only ones which can be recommended as effective water-retaining materials. Further materials exhibit an AWC less than 0.10 m³ m^?3. The CPMs exhibit a bimodal pore size distribution, which can be well described by the applied model, except for pumice and expanded shale. The mixtures present overall low AWCs up to 0.07 m³ m^?3, with the pure sand having less than 0.03 m³ m^?3. For practical application a quite high ratio of CPM is needed, and the mixing material must be adapted to the hydraulic properties of the CPMs. The water inside the CPMs may be easily available for plant roots able to penetrate in the CPMs’ coarse pores.     

Die Oberflächenladung der Ton-Humusfraktion aus Schwarzerden als Funktion von pH und Ca-Konzentration

Surface charge of clay-humus fractions from Chernozems as a function of pH and Ca-concentration The charge characteristics of clay-humus fractions from A-horizons of several Chernozems as a function of Ca concentration and pH of the soil solution was investigated. The surface charge was measured by titration with charge compensating polyelectrolytes; the endpoint was at zero potential. A logarithmic dependence of the surface charge [mol_c/kg] on the Ca concentration of the soil solution in the range ? 2 mmol/L was observed. The influence of pH on the surface charge was almost linear over a wide range of pH-values, the change in pH-dependent charges being most pronounced for the horizons with low Ca saturation on the exchange sites. It was also found that the competition between protons and Ca ions for the exchange sites leads to a distinct decrease of the influence of Ca concentration on the surface charge in acid environment. The reason for slaking of the soil surface and of the displacement of clay-humus particles in Chernozems could be attributed to an increase in surface charge with decreasing Ca concentrations after leaching of lime. According to the present findings the drop in mobility of the clay-humus fractions during acidification could be explained by a charge compensating effect of protons and aluminium ions.     

Quantitative Mineralbestimmung in der Schlufffraktion von Böden auf der Grundlage der chemischen Analyse und unter Anwendung der Karl-Fischer-Titration. I. Verfahren

Quantitative estimation of the mineralogical composition of silt fractions of soils based on both, chemical analysis and application of Karl-Fischer-titration. I. Method This paper describes a method for calculating the mineralogical composition of the silt fractions of soils. The chemical analysis and the temperature dependence of water release are used for determining micas and feldspars, each in three components in a relatively short procedure. The release of water was measured by Karl-Fischer-titration at controlled temperatures. At temperatures above 550°C the water release of the particle size fractions correlates with their content of micas. The quantity of micas can be obtained from the amount of released water and the results of the chemical analysis. The influence of kaolinite, amphibole and the fluoride content on the calculation is described. By considering the potassium content of the mica fraction results of the chemical analysis are used to quantify feldspars.     

Periglacial transport distance of Pb derived from small-scale ore veins in the Rhenish Slate Mountains

The spatial extent of metal contamination caused by small-scale ore veins is increased by periglacial solifluction. Our objectives were (1) to examine the spatial distribution of Pb in cover beds that migrated over Pb ore veins, (2) to calculate the transport distance of ore-derived Pb, and (3) to determine controls on the transport distance.We examined six transects (320-775 m long) in the Rhenish Slate Mountains in West Germany. The transects included four west-exposed and two east-exposed slopes with inclinations between 2-20°. All transects were forest-covered and located at 280-450 m above sea level. Soils were Dystric Cambisols and Stagnic Luvisols. Samples of 120 B horizons developed in the sediments of the last ice age (Wuerm) were analyzed for total Pb concentrations and partly also ²⁰⁶Pb/²⁰⁷Pb ratios. The Pb concentrations ranged from 20 to 135 mg kg^− 1. The spatial Pb distribution suggested that 14 (out of 18) sampling points showing local Pb concentration maxima contained Pb from ore veins upslope. With a two-end-member-mixing model using ²⁰⁶Pb/²⁰⁷Pb isotope ratios of the ore (²⁰⁶Pb/²⁰⁷Pb ratio: 1.1828) as one end member and of the native substrate (a mixture of slate and loess; ²⁰⁶Pb/²⁰⁷Pb ratio: 1.2254 ± 0.0072) as the other we confirmed that the 14 Pb peaks originated from the ore, because they contained 76-100% of ore-derived Pb. By the use of a geographic information system, the transport distance of this Pb was determined to range between 30 and 110 m. Silt concentrations (Pearson r = − 0.69) and the relief curvature (Cramér's V = 0.60) were major controls on the transport distance. Our study demonstrates that Pb ore veins can increase native soil Pb concentrations in soil derived from the periglacial drift of the last ice age (Wuerm) up to a distance of more than 100 m.