Radial variation of vessel size and distribution in cork oak wood (<Emphasis Type="Italic">Quercus suber</Emphasis> L.)

Quercus suber L. is an important species producing cork whose wood characteristics have not been investigated a lot. Cork oak wood vessels are a striking feature and the most abundant wood tissue largely influencing density and permeability. Vessel size and distribution were studied in approximately 40 year-old and never debarked cork oaks by continuously measuring along the radial direction in the transverse section of wood discs taken at 1.3 m of height using image analysis techniques. The vessel size increases with age from 7660 ± 2286 to 21136 ± 6119 μm², the conductive area from 5.4 ± 2.2 to 11.6 ± 3.9%, and the vessel density remains approximately constant between 5.2 ± 1.5 and 7.3 ± 3.5 vessels/mm². In comparison with ring-porous and some evergreen oaks, cork oaks show a similar conductive area but smaller vessels. Vessel architecture is known to play an important role on oaks tolerance to hydric stress, and these cork oak trees were growing under very harsh edaphoclimatic conditions, not tolerated by other oaks. The well-developed and deep root system allowing access to constant water supply may contribute to the cork oak’s relatively high conductive area.     

日本北海道北部寒温带森林流域林冠层凋落物及其养分归还量的景观格局(英文)

Within a forested watershed at the Uryu Experimental Forest of Hokkaido University in northern Hokkaido, overstory litterfall and related nutrient fluxes were measured at different landscape zones over two years. The wetland zone covered with Picea glehnii pure stand. The riparian zone was deciduous broad-leaved stand dominated by Alnus hirsuta and Salix spp., while the mixture of deciduous broadleaf and evergreen conifer dominated by Betula platyphylla, Quercus crispula and Abies sachalinensis distributed on the upland zone. Annual litterfall averaged 1444, 5122, and 4123 kg.hm^-2·a^-1 in the wetland, riparian and upland zones, respectively. Litterfall production peaked in September-October, and foliage litter contributed the greatest amount （73.4%-87.6 %） of the annual total litterfall. Concentrations of nutrients analyzed in foliage litter of the dominant species showed a similar seasonal variation over the year except for N in P glehnii and A. hirsuta. The nutrient fluxes for all elements analyzed were greatest on riparian zone and lowest in wetland zone. Nutrient fluxes via litterfall followed the decreasing sequence： N （11-129 kg.hm-2.aq） 〉 Ca （9-69） 〉 K （5-20） 〉 Mg （3-15） 〉 P （0.4-4.7） for all stands. Significant differences were found in litterfall production and nutrient fluxes among the different landscape components. There existed significant differences in soil chemistry between the different landscape zones. The consistently low soil C：N ratios at the riparian zone might be due to the higher-quality litter inputs （largely N-fixing alder）.     

Fundamental studies on wood/cellulose-plastic composites: effects of composition and cellulose dimension on the properties of cellulose/PP composite

Although wood/cellulose-plastic composites (WPC) of low wood/cellulose content have been more accepted worldwide and are promoted as low-maintenance, high-durability building products, composites containing high wood/cellulose content are not yet developed on an industrial scale. In this study, flow properties, mechanical properties, and water absorption properties of the compounds of cellulose microfiber/polypropylene (PP) and maleic anhydride-grafted polypropylene (MAPP) were investigated to understand effects of the high cellulose content and the dimensions of the cellulose microfiber. The molding processes studied included compression, injection, and extrusion. It was found that fluidity is not only dependent on resin content but also on the dimension of the filler; fluidity of the compound declined with increased fiber length with the same resin content. Dispersion of the composite was monitored by charge-coupled device (CCD) microscope. Increasing the plastic content in the cellulose-plastic formulation improved the strength of mold in addition to the bond development between resin and filler, and the tangle of fibers. The processing mode affected the physicomechanical properties of the cellulosic plastic. Compression-molded samples exhibited the lowest modulus of rupture (MOR) and modulus of elasticity (MOE) and the highest water absorption, while samples that were injection-molded exhibited the highest MOR (70 MPa) and MOE (7 GPa) and low water absorption (2%).     

Canopy recruitment in the beech (<Emphasis Type="Italic">Fagus engleriana</Emphasis>) forest of Mt. Shennongjia,Central China

A dendrochronological technique was used to investigate canopy recruitment of beech (Fagus engleriana Seem.) trees in western Hubei Province of Central China by identifying growth releases through gap formation. The results indicated that 83% and 17% of the canopy trees regenerate in gaps and the understory, respectively. Radial growth analyses demonstrated that there are three modes for beech regeneration and canopy recruitment: (1) gap origin without suppression; (2) gap origin with period(s) of suppression; and (3) understory origin. Multiple periods of release and suppression imply that beech regeneration and canopy recruitment are very sensitive to gap formation.     

Petroleum flotation technique upgrades the germinability of <Emphasis Type="Italic">Casuarina equisetifolia</Emphasis> seed lots

The germination of Casuarina equisetifolia Forst seed lots is low (40–50%) even when freshly collected. This study aimed at upgrading the germination performance by removing non-germinable seeds using petroleum flotation technique. Seeds collected from 19 individual trees in seedling seed orchards in India were assessed using X-ray to determine the proportion of different seed lot fractions. The feasibility of petroleum ether as a separation medium was tested. Morphological characters of floating and sunken seeds were further studied using image analysis technique to examine their effects on the separation efficiency. The X-ray analysis revealed a large quantity of shrivelled, empty and insect-damaged seeds, altogether accounting 50%, which were the causes of low percentage germination of un-graded seed lots (48%). Petroleum flotation resulted in 90% germination in the sunken fraction and 4% in the floating fraction. The separation was distinct for most seed lots, except few seed lots that had relatively low germination in the sunken fractions and more than 10% germination in the floating fractions. As a whole, petroleum flotation appears to be a feasible technique to upgrade the germination of C. equisetifolia seed lots, and its efficacy is influenced by wing surface area, seed density and wing quotient of filled and empty seeds.     

Variations in soil chemical properties and microbial biomass in artificial gaps in silver fir stands

Changes in soil chemical and microbiological parameters in small (185 m²) and medium (410 m²) gaps, created in mature silver fir (Abies alba Mill) stands (mean height 30 m) in the Calabrian Apennines (Southern Italy), were studied over 2 years. Medium gaps had high soil temperature and photosynthetically active radiation (PAR) transmittance and low soil moisture. Within small gaps we detected a greater amount of organic matter, with respect to under canopy cover sites and medium gaps. Moreover, a different trend of the organic matter between small and medium gaps was observed. In the medium gaps, with respect to under canopy cover sites and small gaps, we found a relatively low content of organic matter, associated to a lower amount of humic acid, which suggested that the organic substrate undergoes a mineralization rather than a humification process. An opposite trend was observed in small gaps, where the increase of organic matter content, associated to an increase of humic acid and microbial biomass, suggested a better humification process. Moreover, in small gaps the highest level of urease and the greatest fluorescein diacetate (FDA) hydrolysis were observed. The different trend of organic matter observed in small and medium gaps may be related to changes in the environmental conditions. PAR transmittance, significantly higher in medium gaps, contributed to increase soil temperature and decrease soil moisture, affecting soil microbial populations and organic matter trend. These results suggest that the creation of small gaps represents the silvicultural practice with minor environmental impact.     

Above- and belowground biomass measurements in an unthinned stand of Sitka spruce (<Emphasis Type="Italic">Picea sitchensis</Emphasis> (Bong) Carr.)

Reporting carbon (C) stocks in tree biomass (above- and belowground) to the United Nations Framework Convention on Climate Change (UNFCCC) should be transparent and verifiable. The development of nationally specific data is considered ‘good practice’ to assist in meeting these reporting requirements. From this study, biomass functions were developed for estimating above- and belowground C stock in a 19-year-old stand of Sitka spruce (Picea sitchensis (Bong) Carr.). Our estimates were then tested against current default values used for reporting in Ireland and literature equations. Ten trees were destructively sampled to develop aboveground and tree component biomass equations. The roots were excavated and a root:shoot (R) ratio developed to estimate belowground biomass. Application of the total aboveground biomass function yielded a C stock estimate for the stand of 74 tonnes C ha⁻¹, with an uncertainty of 7%. The R ratio was determined to be 0.23, with an uncertainty of 10%. The C stock estimate of the belowground biomass component was then calculated to be 17 tonnes C ha⁻¹, with an uncertainty of 12%. The equivalent C stock estimate from the biomass expansion factor (BEF) method, applying Ireland’s currently reported default values for BEF (inclusive of belowground biomass), wood density and C concentration and methods for estimating volume, was found to be 60 tonnes C ha⁻¹, with an uncertainty of 26%. We found that volume tables, currently used for determining merchantable timber volume in Irish forestry conditions, underestimated volume since they did not extend to the yield of the forest under investigation. Mean stock values for belowground biomass compared well with that generated using published models.     

Distribution of boron in wood treated with aqueous and methanolic boric acid solutions

The distributions of boron in Japanese cedar (Cryptomeria japonica D. Don) sapwood blocks treated with aqueous or methanolic boric acid [B(OH)₃] solutions were explored through Raman spectroscopy and prompt gamma-ray analysis (PGA). B(OH)₃ was the sole boron species observed in Raman spectra of the wood blocks treated with either solution. Plots of weight gain of the treated wood blocks versus boron concentration in treatment solutions were found to be linear. The results indicated that the methanolic solution makes it possible to impregnate wood with much larger amounts of boron than the aqueous solution. PGA confirmed that B(OH)₃ was highly enriched near the end grains of the treated wood blocks. Raman measurements suggested that boron content in the bulk of the wood block is not as large as expected from the weight gain of the treated wood blocks when an ordinary air-drying method is used. It was concluded that the aqueous solution impregnates the cell walls of wood with boron more easily than the methanolic solution. Part of this report was presented at the 55th (Kyoto, March 2005) and 56th (Akita, August 2006) Annual Meetings of the Japan Wood Research Society. This article follows the previous rapid communication “Analysis of boron in wood treated with boric acid solutions using Doppler broadening method of prompt gamma-rays.” J Wood Sci (2006) 52:279–281     

Sorption of Cr(VI) on the wood of Japanese larch treated with concentrated sulfuric acid

A carbonaceous sorbent was prepared from the wood of Japanese larch (Larix leptolepis) by dehydration with concentrated sulfuric acid in a 69% yield. The abilities of the sorbent to remove Cr(VI) from aqueous solutions were investigated. Research parameters included the initial solution pH, temperature, and initial concentration of Cr(VI) in solution. The removal of Cr(VI) was highly solution pH dependent and was mainly governed by physicochemical sorption under weak acidic conditions. The equilibrium data fit well in the Langmuir isotherm model. The Langmuir constants were calculated at different temperatures, and the sorption capacity increased with rising temperature, indicating the endothermic nature of the Cr(VI) sorption onto the sorbent. The desorption experiments suggest that the Cr(VI) sorption is generally irreversible, owing to strong interaction of HCrO ₄ ⁻ with the active sites of the sorbent.     

Erratum to: Regulation effect of <Emphasis Type="Italic">Phyllostachys pubescens</Emphasis> methanol extractives on growth of seed plants

Due to a processing error, first author's name is missing in the HTML version of this article abstract page. The correct authors are given below: Jun Mu, Tohru Uehara, Takeshi Furuno The online version of the original article can be found at