Estimation of actual evapotranspiration for a drip-irrigated Merlot vineyard using a three-source model

A study was performed in order to evaluate the three-source model (Clumped model) for direct estimation of actual evapotranspiration (ET_a) and latent heat flux (LE) over a drip-irrigated Merlot vineyard trained on a vertical shoot positioned system (VSP) under semi-arid conditions. The vineyard, with an average fractional cover of 30%, is located in the Talca Valley, Region del Maule, Chile. The performance of the Clumped model was evaluated using an eddy covariance system during the 2006/2007 and 2007/2008 growing seasons. Results indicate that the Clumped model was able to predict ET_a with a root mean square error (RMSE), mean bias error (MBE), and model efficiency (EF) of 0.33, −0.15 mm day⁻¹ and 74%, respectively. Also, the Clumped model simulated the daytime variation of LE with a RMSE of 36 W m⁻², MBE of −8 W m⁻², and EF of 83%. Major disagreement (underestimated values) between observed and estimated values of ET_a was found for clear days after rainfall or foggy days, but underestimated values were less than 10% of the data analysis. The results obtained in this study indicate that the Clumped model could be used to directly estimate vine water requirements for a drip-irrigated vineyard trained on a VSP. However, application of the Clumped model requires a good characterization of the drip-irrigated vineyard architecture.     

Surface velocity coefficients for application of the float method in rectangular and compound open channels

A three-dimensional mathematical hydraulic model was applied to calculate velocity profiles and discharge under steady, uniform flow conditions in rectangular and compound open-channel cross sections. The velocity profiles were used to calculate surface velocity coefficients for use with the float method for discharge estimation in the field. Surface velocity coefficients were calculated at increments of one-eighth of the base width from the vertical walls to the center of the cross section, and submergence of the float object from 0 to 30 cm, with a 5-cm depth increment. Model results were summarized to show the relationship between surface velocity coefficient and channel characteristics compared to values published by the US Bureau of Reclamation (USBR). For rectangular cross sections, the coefficients from the model are generally higher than the published USBR values. But the coefficients from the model and USBR are in very close agreement for the tested compound cross sections. The published coefficients by the USBR are a function of only average water depth. However, the model results show that the coefficient is also related to channel size, cross-sectional aspect ratio, surface roughness height, float submergence and lateral location of the float object. These factors should be included in the determination of the surface velocity coefficient to improve the discharge estimations from the application of the float method.     

Response of alfalfa (<Emphasis Type="Italic">Medicago sativa</Emphasis> L.) to diurnal and nocturnal saline sprinkler irrigations. II: shoot ion content and yield relationships

When using saline waters, sprinkling irrigation at night is a recommended practice to reduce evaporation, salt absorption by the wetted leaves and its negative effects on crops. We measured shoot ion concentrations (Cl⁻, Na⁺ and K⁺) and total dry matter (TDM) in alfalfa subject to diurnal and nocturnal saline sprinkler irrigations and established potential relationships among them. The work was carried out along the 2004–2006 growing seasons using EC waters from 0.5 to 5.6 dS m⁻¹. Saline sprinkling irrigations linearly increased shoot Cl⁻ and Na⁺ and decreased shoot K⁺. Even though daytime evaporation was much higher than nigh-time, shoot ion accumulation and TDM were similar in the diurnal and nocturnal irrigations. The salinity tolerance of alfalfa decreased in year 2006 due to increases in shoot Cl⁻ and, particularly, shoot Na⁺. The lower threshold for shoot Na⁺ (276 meq kg⁻¹) than for shoot Cl⁻ (726 meq kg⁻¹) shows that alfalfa is more sensitive to Na⁺ than to Cl⁻, and that Na⁺ accumulation is the preponderant cause of alfalfa yield decline after 3 years of sprinkling with saline waters.     

Response of apricot trees to deficit irrigation strategies

During four growing seasons, 10-year-old apricot trees (Prunus armeniaca L., cv. ‘Búlida’) were submitted to three different drip irrigation regimes: (1) a control treatment, irrigated at 100% of seasonal crop evapotranspiration (ETc), (2) a continuous deficit irrigation (DI) treatment, irrigated at 50% of the control treatment, and (3) a regulated deficit irrigation (RDI) treatment, irrigated at 100% of ETc during the critical periods, which correspond to stage III of fruit growth and 2 months after harvest (early postharvest), and at 25% of ETc during the rest of the non-critical periods in the first two growing seasons and at 40% of ETc in the third and fourth. Soil–plant–water relation parameters were sensitive to the water deficits applied, which caused reductions in leaf and soil water potentials. The longer and severer deficits of the RDI treatment decreased fruit yield in the first two seasons. The RDI treatment pointed to two threshold values that defined the level at which both plant growth and yield were negatively affected with respect to the control treatment: (1) a predawn leaf water potential of around −0.5 MPa during the critical periods, and (2) a 22% drop in irrigation water. The total yield obtained in the DI treatment was significantly reduced in all the years studied due to the lower number of fruits per tree. No changes in the physical characteristics of fruits were observed at harvest. RDI can be considered a useful strategy in semiarid areas with limited water resources.     

Effects of water table management on soil salinity and alfalfa yield in a semi-arid climate

A lysimeter experiment was conducted to investigate the effect of water table management (WTM) on distribution of soil salinity and annual alfalfa (Medicago scutellata) yield. Subirrigations with three levels of water table namely, 0.5 (WT0.5), 0.7 (WT0.7), and 1.0 m (WT1.0) and a free drainage (FD) conventional irrigation treatment were selected for this study. All treatments were arranged in a complete randomized block design with three replicates. The results of this study indicated that the average soil electrical conductivity of the saturated extract (ECe) in the root zone gradually increased and exceeded the designated crop threshold value (4 dS/m) after the first forage harvest in subirrigated lysimeters. A higher salt accumulation was observed at the WT0.5 treatment. The average dry matter yield of annual alfalfa in WT0.5 and WT0.7 treatments was found to be 52 and 73% higher compared with the control treatment, respectively.     

Temporal variability in water quality of agricultural tailwaters: Implications for water quality monitoring

Accurate assessments of non-point source pollution and the associated evaluation of mitigation strategies depend on effective water quality monitoring programs. Intensive irrigation season water quality monitoring was conducted on three agricultural drains (6 h to daily sampling) along with analysis of decade long records from two larger agricultural drains (biweekly to monthly sampling) in the San Joaquin Valley, California. Analyses revealed significant temporal variability in concentrations of nutrients, salts, and turbidity over short time-scales (<1 day), as well as significant differences in monthly and annual mean concentrations. Statistical techniques were used to evaluate the sampling intensity required to meet rigorous confidence and accuracy criteria, as well as to evaluate the efficacy of different sampling strategies (e.g. grab samples versus composite samples). The number of samples required to determine mean constituent concentrations within 20% of the mean at a 95% confidence level ranged from 2 to 39 samples per month (SPM) for total phosphorus, 1-16 SPM for total nitrogen, 5-25 SPM for turbidity, and 1-3 SPM for electrical conductivity. Using a daily composite sample (4 subsamples per composite) instead of discrete samples was shown to maintain the same accuracy and confidence standards, while reducing the required sample number by up to 50%. This study emphasizes the value of a statistical approach for evaluating water quality monitoring strategies, and provides a framework through which cost-benefit analysis can be implemented in the development of monitoring plans.     

Combined use of optical and radar satellite data for the detection of tillage and irrigation operations: Case study in Central Morocco

The objective of this study is to present a new application of optical and radar remote sensing with high spatial (∼10 m) and temporal (a few days) resolutions for the detection of tillage and irrigation operations. The analysis was performed for irrigated wheat crops in the semi-arid Tensift/Marrakech plain (Central Morocco) using three FORMOSAT-2 images and two ASAR images acquired within one week at the beginning of the 2005/2006 agricultural season.The approach we developed uses simple mapping algorithms (band thresholding and decision tree) for the characterisation of soil surface states. The first images acquired by FORMOSAT and ASAR were processed to classify fields into three main categories: ploughed (in depth), prepared to be sown (harrowed), and not ploughed-not harrowed. This information was combined with a change detection analysis based on multitemporal images to identify harrowing and irrigation operations which occurred between two satellite observations.The performance of the algorithm was evaluated using data related to land use and agricultural practices collected on 124 fields. The analysis shows that drastic changes of surface states caused by ploughing or irrigation are detected without ambiguity (consistency index of 96%). This study provided evidence that optical and radar data contain complementary information for the detection of agricultural operations at the beginning of agricultural season. This information could be useful in regional decision support systems to refine crop calendars and to improve prediction of crop water needs over large areas.     

Information technology and innovative drainage management practices for selenium load reduction from irrigated agriculture to provide stakeholder assurances and meet contaminant mass loading policy objectives

Many perceive the implementation of environmental regulatory policy, especially concerning non-point source pollution from irrigated agriculture, as being less efficient in the United States than in many other countries. This is partly a result of the stakeholder involvement process but is also a reflection of the inability to make effective use of Environmental Decision Support Systems (EDSS) to facilitate technical information exchange with stakeholders and to provide a forum for innovative ideas for controlling non-point source pollutant loading. This paper describes one of the success stories where a standardized Environmental Protection Agency (EPA) methodology was modified to better suit regulation of a trace element in agricultural subsurface drainage and information technology was developed to help guide stakeholders, provide assurances to the public and encourage innovation while improving compliance with State water quality objectives. The geographic focus of the paper is the western San Joaquin Valley where, in 1985, evapo-concentration of selenium in agricultural subsurface drainage water, diverted into large ponds within a federal wildlife refuge, caused teratogenecity in waterfowl embryos and in other sensitive wildlife species. The fallout from this environmental disaster was a concerted attempt by State and Federal water agencies to regulate non-point source loads of the trace element selenium. The complexity of selenium hydrogeochemistry, the difficulty and expense of selenium concentration monitoring and political discord between agricultural and environmental interests created challenges to the regulation process. Innovative policy and institutional constructs, supported by environmental monitoring and the web-based data management and dissemination systems, provided essential decision support, created opportunities for adaptive management and ultimately contributed to project success. The paper provides a retrospective on the contentious planning process and offers suggestions as to how the technical and institutional issues could have been resolved faster through early adoption of some of the core principles of sound EDSS design.     

Irrigation management practices of cabbage farmers in Botswana using saline groundwater

All horticultural production in Botswana is irrigated, as average rainfall is less than average reference evapotranspiration in all parts of the country for all of the year, and most of the irrigation in the country is used for horticultural crops. In the main, the water used for irrigation comes from groundwater, and much of this can be classified as moderately saline. A survey was carried out of 60 cabbage farmers in five regions of the country to identify the level of salinity of irrigation water and the irrigation practices used. It was concluded that there was no relationship between the irrigation rate (average irrigation depth divided by average irrigation interval) and the salinity of the water used or the salinity of the soil, such that some farmers were over-irrigating and others under-irrigating. This means that water is being wasted and yields are likely to be reduced. In addition, there is a risk of long-term build-up of salinity and soil degradation.     

Nutrients removed by Kappaphycus alvarezii (Rhodophyta, Solieriaceae) in integrated cultivation with fishes in re-circulating water

The potential of the red alga Kappaphycus alvarezii to remove nutrients was tested to treat effluents of Trachinotus carolinus fish cultivation, and the production of carrageenan in this condition was analyzed. Experiments were conducted in four tanks of 8000 L with approximately 1200 fishes of 30 g each integrated with three tanks of 100 L with 700 g of K. alvarezii, as initial biomass per tank. Seawater was re-circulated between tanks with seaweed and with fish. As a control, three tanks with seawater circulating in an open system were utilized. Seawater samples were collected daily for 10 days and concentrations of nitrate, nitrite, ammonium and phosphate were determined in the inflow and outflow water of the tanks. Significant differences between both collecting points were considered as nutrient removal by the seaweed. Growth rates and carrageenan yields were also analyzed in seaweed cultivated in seawater and in effluents. Growth rates of seaweed cultivated in tanks were lower than those obtained in open sea and in laboratory cultivation. Effluents had concentrations of nitrate and nitrite ca. 100 times higher than in the control. Maximum values of nutrient removal on effluents were: nitrate = 18.2%; nitrite = 50.8%; ammonium = 70.5% and phosphate = 26.8%. All plants survived throughout the experimental period, but some developed “ice–ice”, a disease associated with physiological stress. After the experimental period, some plants selected and cultivated in open sea presented higher growth rates in 40 days, indicating nutrient storage. No significant differences between carrageenan yields of K. alvarezii cultivated in seawater and in the effluents were observed. Our results show that K. alvarezii can be utilized as a biofilter for fish cultivation effluents, reducing the eutrophication process and can also be processed for carrageenan production, which provides an additional benefit to the fisheries.