Response of <Emphasis Type="Italic">Pinus pseudostrobus</Emphasis> Lindl. to fertile growing medium and tephra-layer depth under greenhouse conditions

Major disturbances that remove vegetation cover create conditions that differ greatly from those in adjacent forests. In volcanic areas, tephra deposition can be a major disturbance that eliminates vegetation cover and creates a barrier for plant establishment. The eruption of the Paricutín volcano, in Michoacán, México, from 1943 to 1952, created large tephra deposits adjacent to forest stands. Many of these deposits still lack native vegetation and understanding of the limiting factors for establishment of native tree species is necessary to restore these areas. Pinus pseudostrobus early growth in response to the amount of fertile growing medium on top of a variable-depth tephra layer was evaluated in a greenhouse experiment. Increasing amounts of fertile growing medium increased height of 28-week-old plants (no growing medium = 5.5 cm tall ±1.8 cm, 3 cm of growing medium = 21.2 ± 4.6 cm and 6 cm of growing medium 24.8 ± 4.4 cm). Other variables showed the same trend (diameter, number of fascicles, belowground biomass and aboveground biomass). Our results suggest that P. pseudostrobus establishment in tephra covered areas will depend on the accumulation of a fertile layer of more than 3 cm in thickness.     

Dielectric properties of copper-ethanolamine treated Chinese fir (Cunninghamia lanceolata Hook.)

In order to clarify the interaction between copper and wood substances in wood treated with copper containing water-borne wood preservatives, the dielectric constant ε′ and dielectric loss factor ε″ of untreated wood and wood treated with four concentration levels of copper-ethanolamine (Cu-EA) solutions were determined within a temperature range from –100 to 40°C and a frequency range from 100 to 1 MHz. Three dielectric relaxation processes were observed in the ε″ spectrum; among them R-I is based on the reorientation of methylol groups in the amorphous region of wood cell walls and R-II is related to wood extractives. R-III appeared in Cu-EA treated wood, and its magnitude decreases with the concentration of Cu-EA solutions used in this experiment. This relaxation process was considered to be based on the reorientation of copper-ethanolamine-wood complexes in wood cell walls. At low copper retention, the hydrogen in the complex can form hydrogen bonding with adjacent hydroxyl groups, which results in a strong bonding state between copper and wood; at high copper retention, the numerous copper-ethanolamine complexes not only hinder them from forming hydrogen bonding with adjacent wood molecules due to steric hindrance, but also weaken the interaction between wood molecules themselves, which corresponds to reducing ε″ values of both R-I and R-III processes. The results explain the fact of in-creasing copper leaching in wood treated with high concentration copper-based water-borne preservatives.     

Host selection of small cedar longicorn beetle, <Emphasis Type="Italic">Callidiellum rufipenne</Emphasis> (Coleoptera:Cerambycidae), on Japanese cedar, <Emphasis Type="Italic">Cryptomeria japonica</Emphasis>, in terms of bark water content of host trees

We caught the adults of a secondary wood-boring insect, Callidiellum rufipenne (Motschulsky), on Japanese cedar, Cryptomeria japonica D. Don., trees and logs with manipulated bark water contents to clarify the mechanism of host selection by C. rufipenne. More C. rufipenne were trapped when the bark water content range was ca. 120–200%. Fewer C. rufipenne were trapped at higher and lower bark water contents. These findings indicate that C. rufipenne adults do not simply select weakened or dying trees. Bark water content is one of important factors for C. rufipenne choosing their host for oviposition.     

Screening of extracts of Japanese woods for melanin biosynthesis inhibition

The effects of 120 methanol extracts prepared from bark and heartwood of 69 types of Japanese wood on the melanin production of B16 melanoma cells were examined. The melanin content of B16 melanoma cells was determined spectrophotometrically at 405nm. The extracts were also examined for their effects on cell viability. We found that the methanol extracts of Fagus crenata (buna, wood, 100μg/ml), Sapium sebiferum (Nankinhaze, wood, bark, 10μg/ml), and Zelkova serrata (keyaki, wood, 10μg/ml) greatly inhibited the melanin production of B16 melanoma cells without significant cytotoxicity. However, these extracts did not inhibit tyrosinase activity at the concentration of 100μg/ml. These findings indicate that the depigmenting mechanism of these extracts involves the suppression of some pigmenting signals in stimulating melanogenesis rather than the inhibition of tyrosinase activity. Part of this study was presented at the 53rd Annual Meeting of the Japan Wood Research Society, Fukuoka, Japan, March 2003     

Lignin-degrading activity of edible mushroom <Emphasis Type="Italic">Strobilurus ohshimae</Emphasis> that forms fruiting bodies on buried sugi (<Emphasis Type="Italic">Cryptomeria japonica</Emphasis>) twigs

Strobilurus ohshimae is an edible mushroom, and it specifically forms its fruiting bodies on buried sugi (Cryptomeria japonica) twigs. In this research, we studied lignindegrading activity of S. ohshimae. We isolated 18 strains of S. ohshimae from various regions of Japan, and determined their lignin degradation rates on sugi wood meal medium. All the strains of S. ohshimae degraded approximately 6%–12% of sugi lignin in 30 days, and these lignin degradation rates were 1.5–3 times higher than those of Trametes versicolor, which is a typical lignin-degrading fungus. Among the three main lignin-degrading enzymes, activity of lignin peroxidase and manganese peroxidase was not observed, while 4340U/g of laccase was produced in 30 days. To investigate the effect of wood species on lignin degradation by S. ohshimae, the lignin degradation rate and laccase productivity on sugi wood meal medium were compared with those on beech (Fagus crenata). In T. versicolor, both lignin degradation rate and laccase productivity were higher on beech than on sugi. Conversely, in S. ohshimae, lignin degradation rate and laccase productivity were higher on sugi than on beech. Therefore, it was suggested that coniferous lignin is not always difficult to degrade for the fungi that inhabit softwood. Part of this article presented at the 54th Annual Meeting of the Japan Wood Research Society, Sapporo, August 2004     

Effects of disturbance on regeneration of Abies fabri forests at the upper reaches of the Yangtze River

Mudflow is the principal disturbance in Abies fabri forests. In the Gongga Mountain areas of the upper reaches of the Yangtze River, the intensities and periodicity of different scale mudflows vary. Small-scale mudflows are more frequent, occurring every one or two years while large-scale mudflows may occur once in more than one hundred years. Through a field study of A. fabri forests during different stages of growth, we analyzed their structural characteristics and discovered that after different sizes of mud-flow, poplar and birch often occupy the dominant canopy at the expense of the slow growing A. fabri, for only a small number of saplings are A. fabri that occurs in the first regeneration stage. However, a large number of seed resources can be found in mature A. fabri forests and as a unique regeneration species, A. fabri will gradually replace all the other species and form a stable community of strong shade-tolerant trees. Because of the intimate relationship between growing conditions and soil and water conservation at the upper reaches of the Yangtze River, we should carry out some artificial measurements to control and promote the slow regeneration process of A. fabri.     

Chemical characterization of smoke from the production process of wood-plastic composites

The chemical composition of unpleasant smell, emitted from the production process of wood-plastic composites using Manchurian ash sawdust (Fraxinus mandschurica Rupr.) and polypropylene powder as the raw material, was investigated. Wood sawdust and polypropylene powder were subjected to heat treatment to 290°C during 8 min (the conditions were similar to those employed on an industrial scale). The emitted compounds were collected and analyzed by gas chromatography-mass spectrometry (GC-MS). The analytical r...     

A review of stand basal area growth models

Growth and yield modeling has a long history in forestry. The methods of measuring the growth of stand basal area have evolved from those developed in the U.S.A. and Germany during the last century. Stand basal area modeling has progressed rapidly since the first widely used model was published by the U.S. Forest Service. Over the years, a variety of models have been developed for predicting the growth and yield of uneven/even-aged stands using stand-level approaches. The modeling methodology has not only moved from an empirical approach to a more ecological process-based approach but also accommodated a variety of techniques such as: 1) simultaneous equation methods, 2) difference models, 3) artificial neural network techniques, 4) linear/nonlinear regres-sion models, and 5) matrix models. Empirical models using statistical methods were developed to reproduce accurately and precisely field observations. In contrast, process models have a shorter history, developed originally as research and education tools with the aim of increasing the understanding of cause and effect relationships. Empirical and process models can be married into hybrid mod-els in which the shortcomings of both component approaches can, to some extent, be overcome. Algebraic difference forms of stand basal area models which consist of stand age, stand density and site quality can fully describe stand growth dynamics. This paper reviews the current literature regarding stand basal area models, discusses the basic types of models and their merits and outlines recent progress in modeling growth and dynamics of stand basal area. Future trends involving algebraic difference forms, good fitting variables and model types into stand basal area modeling strategies are discussed.     

Physiological effects of wood on humans: a review

It is empirically known that wood can cause a comfort enhancement effect in humans. On the other hand, not enough scientific knowledge based on evidence-based research is available on this subject. However, data using physiological indices have increasingly accumulated in recent years. This review provides an overview of the current situation for peer-reviewed reports related to the physiological effects of wood. We reviewed reports that elucidated the effects of wood-derived stimulations on the olfactory, visual, auditory, and tactile sensations using physiological indices such as brain activity (e.g., near-infrared spectroscopy) and autonomic nervous activity (e.g., heart rate variability and blood pressure). It became clear that many studies were limited by (1) a small number of participants, mostly aged in their 20s; (2) use of only a single stimulus (e.g., only olfactory or only visual), or (3) an incomplete experimental design. In addition, this review examined the field of forest therapy, for which there is abundant research. Further study is needed to elucidate the physiological effects of wood on humans.     

Studies on pre-treatment by compression for wood drying III: the reduction of moisture content,the recovery rate,and mechanical properties of wood compressed at different moisture content conditions

As a follow-up report, the pre-treatment by compression for wood drying was systematically studied in terms of the reduction of moisture content (MC), the recovery rate (RR), and mechanical properties of wood compressed at different MC conditions. The results showed that MC after compression on water-saturated wood determined the critical value of MC before compression which were about 84 and 105% at a compression ratio of 60 and 40% for Poplar and Chinese fir, respectively. Beyond the critical value, MC after compression remained constantly at about 84% and decreased slightly from 105% for Poplar and Chinese fir, respectively. The MC reduction decreased with the decrease of MC before compression. The MC reduction was rather effective when the MC before compression was higher than the critical value and was recommended to pre-treat for the effectiveness of MC reduction. In addition, after the recovery, the wood volume and mechanical properties were well retained for the wood compressed at all MC conditions which were above fiber saturation point (FSP) before and after compression. Therefore, the pre-treatment by compression is viable in terms of the RR and mechanical properties at rather broad MC conditions above FSP. Moreover, the compression force needed for treatment was almost same at these MC conditions.