玉米转基因在分子农业领域的研究进展

植物转基因技术开辟了作物遗传改良的新途径。近年来,随着植物反应器技术的多元化发展以及日趋成熟,以玉米为分子工厂合成一些高价值产品成为研究热点。笔者就以玉米为植物反应器,用其生产糖类、必需氨基酸、不饱和脂肪酸、维生素、微量元素、生物酶、疫苗、抗体等各种高价值分子代谢物进行了综述,以期为中国分子农业领域的研究与应用提供参考。     

Biocompatibility of Acellular Porcine Dermis

In vitro cultured vascular endothelial cells (VEC) and mouse 3T3 fibroblasts (3T3) on the acellular dermal matrix , which were made of porcine skins. We made the cell proliferation test with MTT assay and the histological observation after cells were seeded on the acelluar dermis for 1 week with histological section. The cell growth curves showed VEC and 3T3 grew much rapidly on the acelluar dermis.The histological observation revealed VEC had formed a monolayer, some places even had formed 2 to 3 layer. The results suggest that the acelluar porcine dermal matrix have good biocompatibility , it will be widely applied.     

Research and Development of a Quality Control System in Construction

In the civil industry, quality is a key factor, so quality management and quality control play decisive roles in construction especially. At present, the main method of construction is quality controlling that engineers and technicians consult the standard and norm concerned, then check them one by one, and supervise the construction. It is not only inefficient but also easy to make mistake. Using computer technology in the quality control of construction will promote quality control level and improve management measures. Through the research of the quality control of construction,the system of quality control in construction is studied and developed, the structure of the software and its developed technology are expounded.     

Design method and homogeneity control of bridge fair-faced concrete

According to the structural characteristics of bridge engineering, the mix optimization design method of bridge fair-faced concrete was presented, and C30~C50 concrete with high cohesion and package, outstanding fluidity and excellent mechanical properties were prepared. Through the test of air content of fresh concrete, micro hardness and micro structure in different parts of hardened concrete specimens, effects of viscosity-modifying admixtures on homogeneity of concrete were discussed. The results showed that the composition of bridge fair-faced concrete were relatively homogeneous, and the microstructure were relatively dense. When C30 concrete mixed with 5 × 10 -5 cellulose ether or 6% silica fume (mass fraction of cementitious material), air content of fresh concrete were less than 2%, and slurry viscosity values were between 1 900 and 2 000 MPa·s. Also, the micro hardness values in different parts of hardened concrete specimens were closed. The results were applied in practical bridge engineering, which generally meets the apparent quality requirements of bridge fair faced concrete.     

Physical simulation of fluid field and structure optimization in two-strand tundish

The influence of the structure and location of dam and weir on fluid flow state in a two-strand tundish is studied, and a set of optimal structure, combining with the average residence time calculated from RTD curve, is obtained. The result indicates that the fluid flow state can be changed and the path of the fluid flow can be prolonged as well as the average residence time is improved after using dam and weir. But there are some dead zones after fluid passed through the dam and weir. Combination scheme of No. one dam and weir is better than the others. Its average residence time is 299 s and the volume fraction of dead zone is 31.0%. After the optimization of flowing control parameters in tundish, the best case is that the distance between dam and weir is 290 mm and the distance between weir and the long nozzle is 383 mm. The longest average residence time is 351 s and the minimum volume fraction of dead zone is 19.0% under the above situation. Compared with that of no dam and weir, the average residence time increases by 65 s and the dead zone volume fraction decreases by 15.0%. Based on Newton formula, the calculated results show that the inclusions with diameter larger than 17.5 μm can float up within 351 s under this optimization situation.     

菲牛蛭抗凝血活性物质提取方法研究

为对菲牛蛭抗凝血活性物质的提取进行优化,通过采取不同方法对菲牛蛭活体(6种)、干体(6种)及唾液腺分泌物(3种)进行提取得出最适提取方法。结果表明对于菲牛蛭活体和干体均是采取80%预冷丙酮提取得到的抗凝血物质含量高,最高分别达至(61.20±1.13)AT-U/g和(89.19±1.13)AT-U/g;对于菲牛蛭唾液腺分泌物则是采取10%的三氯乙酸提取得到的抗凝血物质含量高,最高达(24.41±0.98)AT-U/g。研究结果得出了适合菲牛蛭活体、干体和唾液腺分泌物中提取抗凝血活性物质的最适方法,有利于推动水蛭素的大规模生产和广泛的临床应用。     

不同熔化速率下的电渣重熔过程数值模拟分析

电渣重熔能提高钢锭的质量,从而满足特种行业的需要,其过程伴随着复杂的物理现象,存在着磁流体流动、传热和传质以及电化学等多方面的影响。通过耦合电磁以及流动和温度方程对电渣重熔过程的三维瞬态进行了数学模拟,研究了熔化速率对重熔过程的影响。结果表明：电流密度、焦耳热和电磁力都随着熔化速率的增大而增大,当熔化速率由14.4 kg/h增加到27.0kg/h,电流密度、焦耳热和电磁力最大值的增大比例超过100%。随着熔化速率的增大,温度最大值有小幅的增加,而且速度最大值的增大幅度接近50%;金属熔池深度则由27 mm增大到38 mm,不利于保证铸坯的质量。     

Pd Pattern Recognition Based on Linear Discriminant Analysis in GIS

According to the character of PD in GIS, the authors design four kinds of GIS defection models. The GIS gray intensity images are constructed based on mass specimens gathered by the ultra - high frequency and high speeds systems, Aiming at the PD characteristics and its defections, A PCA-FDA method is put forward based on PD images. The principal component analysis is employed to condense the dimension of PD images, then the optimal sets of statistically uncorrelated discriminant vectors are extracted, and the minimum distance classifier is constructed as classifier. The identified results show that this method can effectively elevated the discrimination of the four kinds of defects in GIS PD.     

人在环路模拟驾驶仿真实验系统研发

汽车是人机协同控制的复杂系统,基于NI PXIe8108实时控制器、PXI7842R数据采集卡、模拟驾驶输入设备及相关软硬件搭建了驾驶模拟仿真系统;用LabVIEW编程语言建立了车辆动力学模型;用虚拟引擎Unity3D软件开发了视景系统;并通过数据库技术使仿真过程与视景系统相结合,实现仿真过程与三维动画实时视景系统的数据交互。结果表明：通过人在环路模拟驾驶仿真实验,使仿真过程中引入了驾驶模拟操纵,实现了人在环路的人机交互式仿真,得到汽车相关性能仿真结果,为驾驶过程中人和汽车协同控制仿真和极端工况下的仿真,提供了一种安全、可靠的人车协同控制仿真环境。