Comparing the osteogenic potential of canine mesenchymal stem cells derived from adipose tissues, bone marrow, umbilical cord blood, and Wharton's jelly for treating bone defects

Alternative sources of mesenchymal stem cells (MSCs) for replacing bone marrow (BM) have been extensively investigated in the field of bone tissue engineering. The purpose of this study was to compare the osteogenic potential of canine MSCs derived from adipose tissue (AT), BM, umbilical cord blood (UCB), and Wharton''s jelly (WJ) using in vitro culture techniques and in vivo orthotopic implantation assays. After canine MSCs were isolated from various tissues, the proliferation and osteogenic potential along with vascular endothelial growth factor (VEGF) production were measured and compared in vitro. For the in vivo assay, MSCs derived from each type of tissue were mixed with β-tricalcium phosphate and implanted into segmental bone defects in dogs. Among the different types of MSCs, AT-MSCs had a higher proliferation potential and BM-MSCs produced the most VEGF. AT-MSCs and UCB-MSCs showed greater in vitro osteogenic potential compared to the other cells. Radiographic and histological analyses showed that all tested MSCs had similar osteogenic capacities, and the level of new bone formation was much higher with implants containing MSCs than cell-free implants. These results indicate that AT-MSCs, UCB-MSCs, and WJ-MSCs can potentially be used in place of BM-MSCs for clinical bone engineering procedures.     

Assessment of growth and seed oil composition of kenaf (Hibiscus cannabinus L.) germplasm

This study was conducted to evaluate the growth characteristics and fatty acid composition among 15 kenaf mutants derived from the kenaf germplasm C14 and 15 kenaf accessions originating from Russia, India, China, Iran, and Italy. The overall growth performance (plant height, stem diameter, flowering date, leaf, and flower size) of the stem color mutant lines derived from C14 are similar to those of the original variety. However, the flower color mutant lines derived from C14 showed flowering to occur 10 days later when compared with the original variety and showed smaller leaf sizes than the original variety. Late-ripened kenaf accessions (Jinju, Auxu, and Jnagdae) can yield more bio-mass compared with early or medium-maturing germplasm. The late maturity kenaf (Auxu, Jinju, and Jangdae) has a higher oil percentage than the early maturity germplasm. Linoleic, oleic, and palmitic acids were the predominant fatty acids in all kenaf seeds. The stem color mutant lines significantly surpassed the parental means of all saturated fatty acids. In addition, the flower color mutant lines showed broad ranges of variation in oleic acid. The 15 accessions showed a wide range of fatty acid compositions, spanning from 29.75 to 38.30% saturated fatty acids and 61.70 to 70.24% total unsaturated fatty acids, and the late maturity kenaf has a higher linoleic acid percentage than the early maturity germplasm. The flowering period was highly positively (P ≤ 0.01) correlated with the plant height, stem diameter, oil percent, and linolenic acid (C_18:3), and it was significantly negatively (P ≤ 0.01) correlated with stearic acid (C_18:0). These results will provide valuable information to assist the parental selection of kenaf breeding.     

Evaluation of performance of sorghum varieties grown in Tokyo for sugar accumulation and its correlation with vacuolar invertase genes SbInv1 and SbInv2

ABSTRACT

The sugar-accumulating potential of global and local sweet and grain sorghum varieties were tested under the local conditions. The basis for this study was the dependency of sugar accumulation on temperature and photoperiod. Thus, the efficacy of cultivars as a bioenergy source would need to be determined based on their performance under the local environmental conditions. A strong correlation of sucrose content with brix was observed, enabling large-scale screening of varieties for high sucrose content. The morphological characteristics inherent in sweet sorghum, such as tall stems, greater number of leaves and a longer vegetative period, were found to correlate with the total stem sugar content. Assessment of sugars along the stem revealed maximum sugar accumulation in the upper intermediate to upper internodes in most of the varieties tested. The maximum theoretical ethanol yield (MTEY), a function of brix and juice yield, was determined as a better indicator of testing the performance of a variety as a potential source of bioethanol, mainly due to a negative correlation of stem juiciness and sucrose content in the varieties tested. Further, the relative expression of vacuolar invertase genes, SbINV1 and SbINV2, was studied, and a strong negative correlation of SbINV2 to stem sucrose content was observed. This reveals a possibility of involvement of vacuolar invertase gene, SbINV2, in sugar accumulation in sweet sorghum stems, and as a key candidate for molecular breeding studies for higher stem sugar content.     

Variation for apparent amylose content of endosperm starch in Triticum durum and Aegilops squarrosa

For breeding to increase amylose content in the starch of hexaploid wheat, either the introduction of genes from Aegilops squarrosa (DD genome) or the development of high-amylose amphiploids between Triticum durum (AABB genome) and Ae. squarrosa is one of the most efficient ways. The high-amylose genes have not been detected in any species of Triticum and Aegilops. Therefore, we assessed the apparent amylose content in endosperm starch of T. durum and Ae. squarrosa accessions supplied from the major gene banks from world wide, and found several accessions with higher amylose content out of 665 T. durum accessions and out of 732 Ae. squarrosa accessions. Genetic analysis indicated that a high amylose trait in Ae. squarrosa is monogenically inherited by a recessive major gene. This revised version was published online in July 2006 with corrections to the Cover Date.     

Characterisation of starch properties and physical characteristics in buckwheat (Fagopyrum esculentum Moench.) mutant lacking accumulation of ‘granule-bound starch synthase a’

The concentration of amylose, which is synthesised using granule-bound starch synthase, affects the physical properties of food. However, no studies have focused on starch properties and physical characteristics of low-amylose buckwheat. Here, we hypothesised that low-amylose buckwheat would be useful to produce new buckwheat products because low-amylose characteristics change the texture of buckwheat food. In this study, we bred relatively low-amylose buckwheat compared to wild type and investigated the causative genes of the traits, starch properties and physical properties of noodles. In the GBSSa mutant, the amylose concentration was lower than that in the wild type. Compared with the wild type, the mutant exhibited the following traits: Amylose concentration decreased by approximately 2%, setback in the Rapid Visco Analyzer decreased by 30 points and the physical characteristics of noodles in the sensory analysis were soft and sticky. These results suggest that this trait may be useful for changing the texture of foods. In addition, the mutant is promising for producing new foods with physical characteristics that are different from those of the wild type.     

Herbicidal and biological characteristics of a new benzenesulfonylurea compound K-11451 under submerged paddy conditions

The new benzenesulfonylurea K-11451, an α-hydroxy-β-fluoropropyl- compound, applied at 3–9 g ha ⁻¹, controlled annual and perennial weeds grown in submerged paddy soil under greenhouse conditions. It effectively controlled barnyardgrass at growth stages varying from pre-emergence to the five-leaf stage. The compound inhibited acetolactate synthase, I₅₀ values for the enzyme isolated from barnyardgrass and rice being 56 and 67 nM , respectively. K-11451 inhibited the growth of rice when it was transplanted at a shallow depth (0–1 cm) and water leaching from the paddy soil was high (3–5 cm per day). With a water depth of 3 cm, the compound appeared to move readily down into the paddy soil and had the relatively short half-life of 15.2 days under submerged paddy conditions. A mixture of K-11451 + mefenecet + daimuron (9 + 250 + 250 g ha⁻¹) controlled almost all weeds in the paddy field without injury to rice, so that the combination could be used as a ‘one-shot’ herbicide in rice culture.     

Effects of Processing Parameters on Physical Properties of Corn Starch Extrudates Expanded Using Supercritical CO2 Injection

Corn starch was extruded with a corotating twin-screw extruder (24:1 L/D ratio, 31-mm screw diameter) and supercritical CO₂ was injected as a blowing agent. The effects of barrel temperature (80–90°C), screw speed (150–250 rpm), and water injection (30–54 g/min) on specific mechanical energy (SME) input for the process and the physical properties of extrudates, such as expansion ratio, water absorption (WA), water solubility (WS), breaking stress, and elastic modulus, were examined using a response surface methodology. Barrel temperature had the greatest effect on physical properties of extrudates but not on SME input, whereas screw speed and water injection had significant effects on SME input. Extrudates had a smooth surface, and air cells were uniform and closed, providing low WA and WS. Using superimposed contour plots, optimum barrel temperature, screw speed, and water injection rate, based on maximum expansion ratio and minimum SME input, were 94–96°C, 155–175 rpm, and 36–39 g/min, respectively.     

A Bayesian Generalized Linear Model for Crimean–Congo Hemorrhagic Fever Incidents

Global spread of the Crimean–Congo hemorrhagic fever (CCHF) is a fatal viral infection disease found in parts of Africa, Asia, Eastern Europe and Middle East, with a fatality rate of up to 30%. A timely prediction of the prevalence of CCHF incidents is highly desirable, while CCHF incidents often exhibit nonlinearity in both temporal and spatial features. However, the modeling of discrete incidents is not trivial. Moreover, the CCHF incidents are monthly observed in a long period and take a nonlinear pattern over a region at each time point. Hence, the estimation and the data assimilation for incidents require extensive computations. In this paper, using the data augmentation with latent variables, we propose to utilize a dynamically weighted particle filter to take advantage of its population controlling feature in data assimilation. We apply our approach in an analysis of monthly CCHF incidents data collected in Turkey between 2004 and 2012. The results indicate that CCHF incidents are higher at Northern Central Turkey during summer and that some beforehand interventions to stop the propagation are recommendable. Supplementary materials accompanying this paper appear on-line.     

A simple method for squeezing juice from rice stems and its use in the high-throughput analysis of sugar content in rice stems

Sugar content in rice (Oryza sativa L.) stem is an agronomically important trait for rice used in straw silage or whole-crop silage. However, the mechanisms underlying sugar accumulation in rice stems remain unclear, mainly due to the time-consuming method for measuring sugar content. Here, we established a simple method for squeezing stem juice from rice plants, similar to that used during breeding selection in sugarcane or sorghum. The Brix value of the stem juice, which can easily be measured using a portable refractometer, significantly correlated with the soluble sugar contents in the stem juice and tended to correlate with those in stem tissues. This indicates that the Brix value of the stem juice can be used for estimating the sugar content in rice stems. This simple estimation method will be a useful tool for high-throughput analysis of sugar content in rice stems during mutant screening, QTL analysis, and breeding selection.     

Modification of SWAT auto-calibration for accurate flow estimation at all flow regimes

To secure accuracy in the Soil and Water Assessment Tool (SWAT) simulation for various hydrology and water quality studies, calibration and validation should be performed. When calibrating and validating the SWAT model with measured data, the Nash–Sutcliffe efficiency (NSE) is widely used, and is also used as a goal function of auto-calibration in the current SWAT model (SWAT ver. 2009). However, the NSE value has been known to be influenced by high values within a given dataset, at the cost of the accuracy in estimated lower flow values. Furthermore, the NSE is unable to consider direct runoff and baseflow separately. In this study, the existing SWAT auto-calibration was modified with direct runoff separation and flow clustering calibration, and current and modified SWAT auto-calibration were applied to the Soyanggang-dam watershed in South Korea. As a result, the NSE values for total streamflow, high flow, and low flow groups in direct runoff, and baseflow estimated through modified SWAT auto-calibration were 0.84, 0.34, 0.09, and 0.90, respectively. The NSE values of current SWAT auto-calibration were 0.83, 0.47, ?0.14, and 0.90, respectively. As shown in this study, the modified SWAT auto-calibration shows better calibration results than current SWAT auto-calibration. With these capabilities, the SWAT-estimated flow matched the measured flow data well for the entire flow regime. The modified SWAT auto-calibration module developed in this study will provide a very efficient tool for the accurate simulation of hydrology, sediment transport, and water quality with no additional input datasets.