Genomic prediction for meat and carcass traits in Nellore cattle using a Markov blanket algorithm

This study was carried out to evaluate the advantage of preselecting SNP markers using Markov blanket algorithm regarding the accuracy of genomic prediction for carcass and meat quality traits in Nellore cattle. This study considered 3675, 3680, 3660 and 524 records of rib eye area (REA), back fat thickness (BF), rump fat (RF), and Warner–Bratzler shear force (WBSF), respectively, from the Nellore Brazil Breeding Program. The animals have been genotyped using low-density SNP panel (30 k), and subsequently imputed for arrays with 777 k SNPs. Four Bayesian specifications of genomic regression models, namely Bayes A, Bayes B, Bayes Cπ and Bayesian Ridge Regression methods were compared in terms of prediction accuracy using a five folds cross-validation. Prediction accuracy for REA, BF and RF was all similar using the Bayesian Alphabet models, ranging from 0.75 to 0.95. For WBSF, the predictive ability was higher using Bayes B (0.47) than other methods (0.39 to 0.42). Although the prediction accuracies using Markov blanket of SNP markers were lower than those using all SNPs, for WBSF the relative gain was lower than 13%. With a subset of informative SNPs markers, identified using Markov blanket, probably, is possible to capture a large proportion of the genetic variance for WBSF. The development of low-density and customized arrays using Markov blanket might be cost-effective to perform a genomic selection for this trait, increasing the number of evaluated animals, improving the management decisions based on genomic information and applying genomic selection on a large scale.     

Using midday stem water potential for scheduling deficit irrigation in mid–late maturing peach trees under Mediterranean conditions

Irrigation techniques that reduce water applications are increasingly applied in areas with scarce water resources. In this study, the effect of two regulated deficit irrigation (RDI) strategies on peach [Prunus persica (L.) Batsch cv. “Catherine”] performance was studied over three growing seasons. The experimental site was located in Murcia (SE Spain), a Mediterranean region. Two RDI strategies (restricting water applications at stage II of fruit development and postharvest) based on stem water potential (Ψ_s) thresholds (?1.5 and ?1.8 MPa during fruit growth and ?1.5 and ?2.0 MPa during postharvest) were compared to a fully irrigated control. Soil water content (θ_v), Ψ_s, gas exchange parameters, vegetative growth, crop load, yield and fruit quality were determined. RDI treatments showed significantly lower values of θ_v and Ψ_s than control trees when irrigation water was restricted, causing reductions in stomatal conductance and photosynthesis rates. Vegetative growth was reduced by RDI, as lower shoot lengths and pruning weights were observed under those treatments when compared to control. However, fruit size and yield were unaffected, and fruit quality was slightly improved by RDI. Water savings from 43 to 65 % were achieved depending on the year and the RDI strategy, and no negative carryover effect was detected during the study period. In conclusion, RDI strategies using Ψ_s thresholds for scheduling irrigation in mid–late maturing peach trees under Mediterranean conditions are viable options to save water without compromising yield and even improving fruit quality.     

Modeling soil water dynamics in a drip-irrigated intercropping field under plastic mulch

Intercropping, drip irrigation, and the use of plastic mulch are important management practices, which can, when utilized simultaneously, increase crop production and save irrigation water. Investigating soil water dynamics in the root zone of the intercropping field under such conditions is essential in order to understand the combined effects of these practices and to promote their wider use. However, not much work has been done to investigate soil water dynamics in the root zone of drip-irrigated, strip intercropping fields under plastic mulch. Three field experiments with different irrigation treatments (high T1, moderate T2, and low T3) were conducted to evaluate soil water contents (SWC) at different locations, for different irrigation treatments, and with respect to dripper lines and plants (corn and tomatoes). Experimental data were then used to calibrate the HYDRUS (2D/3D) model. Comparison between experimental data and model simulations showed that HYDRUS (2D/3D) described different irrigation events and SWC in the root zone well, with average relative errors of 10.8, 9.5, and 11.6 % for irrigation treatments T1, T2, and T3, respectively, and with corresponding root mean square errors of 0.043, 0.035, and 0.040 cm³ cm^?3, respectively. The results showed that the SWC in the shallow root zone (0–40 cm) was lower under non-mulched locations than under mulched locations, irrespective of the irrigation treatment, while no significant differences in the SWC were observed in the deeper root zone (40–100 cm). The SWC in the shallow root zone was significantly higher for the high irrigation treatment (T1) than for the low irrigation treatment, while, again, no differences were observed in the deeper root zone. Simulations of two-dimensional SWC distributions revealed that the low irrigation treatment (T3) produced serious severe water stress (with SWCs near the wilting point) in the 30–40 cm part of the root zone, and that using separate drip emitter lines for each crop is well suited for producing the optimal soil water distribution pattern in the root zone of the intercropping field. The results of this study can be very useful in designing an optimal irrigation plan for intercropped fields.     

The effect of salinity on corn yield using the CERES-maize model

In most cases, when calculating soil water availability, only thewater content is considered. The effect of salinity on the wiltingpoint is neglected. The objective of this work is to use asimulation model (CERES-maize) in order to predict cornyields as a function of water salinity under severalenvironmental, agrotechnical, and plant characteristics. A modelis presented in which the wilting point is a function of the soilsalt content. At high salinity, the water content at wilting pointis higher than at low salinity, resulting in an insufficient amountof available water and, therefore, a reduced yield. The modelwas used to simulate several theoretical and experimentalsituations for forage corn and grain corn. Simulation resultsshowed that nitrogen fertilization increases the salinity thresholdvalue and the yield sensitivity (rate of yield reduction per unitof salinity). The also showed that forage corn is more sensitiveto salinity than grain corn. If the soil is not leached, a heaviersoil texture has a higher salinity threshold value. On the otherhand, if the soil is leached, the soil texture has no influence onthe salinity threshold value and the yield is less sensitive tosalinity in sandy soils. The determination coefficient (r²= 0.75) indicated that the results of the simulations were in goodagreement with the field data.     

Artificial inoculation and susceptibility of Pinus armandii to Dothistroma septosporum

Dothistroma needle blight (DNB) is a serious needle disease of conifers that primarily affects pine species (Pinus spp.). Dothistroma septosporum is one of the DNB pathogens that has a diverse range of host species excluding Pinus armandii. In 15 inoculated P. armandii seedlings, D. septosporum acervuli were observed in 43 infected needles of ten seedlings with a mean disease severity of 1.11% at 25 weeks after inoculations, demonstrating the potential of D. septosporum to cause symptoms on the needles of P. armandii via artificial inoculation. The disease severity of P. armandii was similar to the positive control, Pinus nigra (median 0.75 for P. armandii to 0.70 for P. nigra), thus, P. armandii acts under artificial conditions as a susceptible host species.     

Total Phenolic Levels,In Vitro Antioxidant Properties,and Fatty Acid Profile of Two Microalgae,Tetraselmis marina Strain IMA043 and Naviculoid Diatom Strain IMA053, Isolated from the North Adriatic Sea

This work studied the potential biotechnological applications of a naviculoid diatom (IMA053) and a green microalga (Tetraselmis marina IMA043) isolated from the North Adriatic Sea. Water, methanol, and dichloromethane (DCM) extracts were prepared from microalgae biomass and evaluated for total phenolic content (TPC) and in vitro antioxidant properties. Biomass was profiled for fatty acid methyl esters (FAME) composition. The DCM extracts had the highest levels of total phenolics, with values of 40.58 and 86.14 mg GAE/g dry weight (DW in IMA053 and IMA043, respectively). The DCM extracts had a higher radical scavenging activity (RSA) than the water and methanol ones, especially those from IMA043, with RSAs of 99.65% toward 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid)diammonium salt (ABTS) at 10 mg/mL, and of 103.43% against 2,2-diphenyl-1-picrylhydrazyl (DPPH) at 5 mg/mL. The DCM extract of IMA053 displayed relevant copper chelating properties (67.48% at 10 mg/mL), while the highest iron chelating activity was observed in the water extract of the same species (92.05% at 10 mg/mL). Both strains presented a high proportion of saturated (SFA) and monounsaturated (MUFA) fatty acids. The results suggested that these microalgae could be further explored as sources of natural antioxidants for the pharmaceutical and food industry and as feedstock for biofuel production.     

Hexavalent Chromium Removal by Candida sp. in a Concentric Draft-Tube Airlift Bioreactor

The main purpose of this work was to conduct a kinetic study on cell growth and hexavalent chromium [Cr(VI)] removal by Candida sp. FGSFEP in a concentric draft-tube airlift bioreactor. The yeast was batch-cultivated in a 5.2-l airlift bioreactor containing culture medium with an initial Cr(VI) concentration of 1.5 mM. The maximum specific growth rate of Candida sp. FGSFEP in the airlift bioreactor was 0.0244 h^?1, which was 71.83% higher than that obtained in flasks. The yeast strain was capable of reducing 1.5 mM Cr(VI) completely and exhibited a high volumetric rate [1.64 mg Cr(VI) l^?1 h^?1], specific rate [0.95 mg Cr(VI) g^?1 biomass h^?1] and capacity [44.38 mg Cr(VI) g^?1 biomass] of Cr(VI) reduction in the airlift bioreactor, with values higher than those obtained in flasks. Therefore, culture of Candida sp. FGSFEP in a concentric draft-tube airlift bioreactor could be a promising technological alternative for the aerobic treatment of Cr(VI)-contaminated industrial effluents.     

Influence of Salinity in the Bioavailability of Zn in Sediments of the Gulf of Cádiz (Spain)

This study assesses the effect of salinity in bioavailability and toxicity of Zn by means of laboratory bioassays by observing contamination in both sediment and water, accumulation of Zn in biological tissues, and histopathological damage in the gills and guts tissues of Ruditapes philippinarum clams, which were exposed to different types of sediments from the Gulf of Cádiz (SW Spain) as well as two dilutions of toxic mud coming from an accidental mining spill. With this objective, the coefficients of distribution (K _D) for Zn between overlying water and sediments were calculated, the histopathological frequencies in the tissues of the gills and guts of clams were determined, and the biota-sediment bioaccumulation factors as well as the bioaccumulation factors were quantified in the different stations. Results showed that the greatest histopathological damages appeared when the salinity values decreased. Statistical results showed that salinity was inversely correlated with histopathological damage (p?<?0.01) for the lesion index for gills. The most outstanding results were observed in the two dilutions of toxic mud (0.3% and 7.9%) at a salinity value of 10. Salinity was inversely correlated with the concentration of Zn in biological tissues (p?<?0.05) and inversely correlated with the concentration of Zn in water and sediment. Zn mobilization to the overlying water is produced when salinity values decrease.