The effect of compression and incision on wood veneer and plywood physical and mechanical properties

ABSTRACT

Drying takes the largest share of energy in plywood production, and varying moisture content of veneers necessitates re-drying that often leads to over-dry veneers with deactivated surfaces, which may promote imperfect bonding. In order to decrease the drying time, reduce the need for re-drying of veneers, and improve the quality of plywood, birch and spruce veneers were subjected to pre-treatment by cold compression, incision, or a combination of the two. The effects of pre-treatment on the veneer and plywood quality were assessed by standard tests. Compression had a beneficial effect on water removal of the wettest veneers (spruce sapwood (SW) and birch), but some thickness reduction was observed in the veneers as well as the finished birch plywood. Compression led to thickness reduction of spruce veneers, but had no effect on SW plywood thickness likely due to higher viscoelasticity. Both compression and the combination of incising and compression levelled the moisture variation within the compressed stacks. Incision improved the modulus of elasticity of birch plywood, shear strength of SW plywood, and both bending and shear strengths of heartwood plywood. Higher surface pressure decreased the drying time of spruce SW in both plain compression and combined incision and compression pre-treatment.     

Salt distribution in response to optical stratification porosity and relative windspeed in a coastal forest in Niigata, Japan

Wind velocity, vertical stand structure and seasalt distribution were measured at various heights inside a plantation of coastal pine forest, with thinning and unthinning, to assess whether any relationships exist between the wind profile, stand structure and seasalt distribution in the coastal pine forest. The vertical stand structure, i.e., optical stratification porosity (OSP), which is defined as vertical distribution of the proportion of sky hemisphere not obscured by tree elements inside a forest stand, was determined for each height by computer analysis of digital images taken with a hemispherical lens. The distribution of OSP in the coastal forest follows the Lambert-Beer's law with absorbency coefficient (). The relative windspeed within canopy can be described using the exponential form with the attenuation coefficient (). The sea-salt was collected using salt gauze (a surgical dressing of loosely woven cotton) both inside and outside the coastal forest, and the distribution of sea-salt within canopy was also in accordance with an exponential function. The relationships among windspeed, OSP and sea-salt indicate that the distributions of both sea-salt and windspeed within canopy were very closely correlated with the distribution of OSP. A linear relationship between OSP and sea-salt has been found. Additionally, linear regression between coefficients and has been obtained as well. Based on these relationships between OSP, wind and sea-salt in the coastal forest, the sea-salt distribution and wind profile within the canopy of the coastal forest can be predicted according to OSP. These results may therefore be useful in analyzing the effects of sea-salt on vegetation and evaluating the filter functions of coastal forests.This revised version was published online in November 2005 with corrections to the Cover Date.     

Surface deterioration of wood-flour polypropylene composites by weathering trials

The market for wood-fiber plastic composites (WPCs) is expanding rapidly in many countries including Japan, where WPCs are mainly used for exterior products. In such applications, WPCs undergo undesirable color change, chalking, and shrinkage and swelling, and accordingly there is a need to better understand the mechanisms responsible for the weathering of WPC and develop methods of improving their weathering resistance. In this study, weatherability of WPC was assessed by natural and accelerated weathering trials. Discoloration (whitening) of WPC during exposure was caused by degradation of both wood and plastic. Darker color pigments as additives improved the color stability of WPC; however, chalking on the surfaces still occurred. The color stability of WPC was improved by application of exterior coatings. Preweathering of WPC (before coatings were applied) increased the absorption of coatings by the WPC and had a positive effect on the color stability and prevented chalking of the composites. Parts of this study were presented at the IUFRO XXII World Congress Meeting, Brisbane, August 2005 and the IAWPS 2005, Yokohama, November 2005     

Mechanical behavior of the crystal lattice of natural cellulose in wood under repeated uniaxial tension stress in the fiber direction

This study investigated the relationship between the cellulose crystal lattice strain (crystalline region) and the macroscopic surface strain in specimens of Chamaecyparis obtusa wood under repeated uniaxial tension stress in the fiber direction. Changes in the strain of the crystal lattice were measured from the peak of (004) reflection using the transit X-ray method. The macroscopic surface strain of each specimen was measured with a strain gauge. In both loading and unloading, the surface strain changed linearly with changes in stress. However, crystal lattice strain was not linear but exhibited changes along a curve with changing stress. Under stressed conditions, the crystal lattice strain was always less than the surface strain, regardless of the frequency of repetition in the loading and unloading cycle. The ratio of the crystal lattice strain to the surface strain showed a negative correlation for stress in both loading and unloading. That is, the ratio decreased with increasing stress, and finally tend to converge to a specific value. The ratio (I/I ₀) between the diffracted intensity (I ₀) in the (004) plane in the unloaded condition and the diffracted intensity (I) in the (004) plane in the loaded condition tend to converge on a specific value with increasing frequency of repetition. When the substantial tension Young’s modulus of the wood in the longitudinal direction decreased, the ratio of the strain of the crystal lattice to the surface strain also decreased. Moreover, the ratio decreased with increasing microfibril angle of the specimen.     

Predicting individual stem volumes of sugi (Cryptomeria japonica D. Don) plantations in mountainous areas using small-footprint airborne LiDAR

This study investigated which predictor variables with respect to crown properties, derived from small-footprint airborne light detection and ranging (LiDAR) data, together with LiDAR-derived tree height, could be useful in regression models to predict individual stem volumes. Comparisons were also made of the sum of predicted stem volumes for LiDAR-detected trees using the best regression model with field-measured total stem volumes for all trees within stands. The study area was a 48-year-old sugi (Cryptomeria japonica D. Don) plantation in mountainous forest. The topographies of the three stands with different stand characteristics analyzed in this study were steep slope (mean slope ± SD; 37.6° ± 5.8°), gentle slope (15.6° ± 3.7°), and gentle yet rough terrain (16.8° ± 7.8°). In the regression analysis, field-measured stem volumes were regressed against each of the six LiDAR-derived predictor variables with respect to crown properties, such as crown area, volume, and form, together with LiDAR-derived tree height. The model with sunny crown mantle volume (SCV) had the smallest standard error of the estimate obtained from the regression model in each stand. The standard errors (m³) were 0.144, 0.171, and 0.181, corresponding to 23.9%, 21.0%, and 20.6% of the average field-measured stem volume for detected trees in each of these stands, respectively. Furthermore, the sum of the individual stem volumes, predicted by regression models with SCV for the detected trees, occupied 83%–91% of field-measured total stem volumes within each stand, although 69%–86% of the total number of trees were correctly detected by a segmentation procedure using LiDAR data.     

Effects of thinning on wind damage in Pinus thunbergii plantation ——Based on theoretlcal derlvation of risk—ratios for assessing wind damage

Based on paper of “Theoretical derivation of risk-ratios for assessing wind damage in coastal forest“,wind damage in the pine coasteal forest,which was thinned at four levels in December of 1997,was investigated for four successive growing seasons.Besides wind damage,the wind profiles outside and inside the coastal forest stand and the distributions of optical stratification porosity (OSP) were also observed.Based on these data,risk-ratios of wind damage for both individual trees and stands were estimated according to the methods developed in “Theoretical derivation of risk-ratios for assessing wind damage in a coastal forest“.The results showed that risk-ratios of wind damage,which were calculated from the meen height and diameter only and from the combination of wind and stand sructure profiles,accurately predicted wind damage in the plantation.Relationships between different thinning ratios and incidence of wind damage showed that stand stability decreased soon after the thinning.This was due to the immediate effects of thinning on increasing the canopy roughness and wind load,and on decreasing the sheltering effects from surrounding trees.However,thinning strategies could improve the stability by long-term effects on growthand development of trees against extreme wind.Only canopy damage was recorded during the experimental period,no stem damage was found,even though the maximum 10-min wind speed outside the coastal forest attained 30.2m s^-1.The results obtained in this study indicate that thinning is the most effective silvicultural strategy available for managing coastal forest despite the increased probability of wind damage soon after thinning.     

Continuum contraction of tension wood fiber induced by repetitive hygrothermal treatment

Wood Science and Technology - Tension wood, when kiln-dried, is likely to deform hugely, which is probably caused by a gelatinous layer of the gelatinous fiber. To elucidate the mechanism behind...     

Sodium bicarbonate protects uranium-induced acute nephrotoxicity through uranium-decorporation by urinary alkalinization in rats

To evaluate the effectiveness of sodium bicarbonate (SB) in removing uranium and protecting animals from uranium toxicity, we intramuscularly administered 1 mg/kg of uranyl nitrate to 8-wk-old male SD rats, and 20 min after administration of uranyl nitrate, the animals were given a single oral administration of SB at 0.1, 0.3 or 1 g/kg. The SB treatment at a dose of 0.3 g/kg or more raised the pH of the rats’ urine until 4 h after treatment, and it significantly reduced the uranium amounts in the kidneys at 1 day after treatment. In another experiment, rats were intramuscularly administered 1 mg/kg of uranyl nitrate, and 20 min later, the animals were treated with sodium bicarbonate (0.1 or 1 g/kg). The rats were autopsied at 1, 3 and 7 days after uranium treatment. High-dose SB resulted in a significant increase in urinary uranium excretion in the first 24 h and a reduction of uranium deposition in the kidneys and femurs, and it also significantly suppressed uranium-induced renal toxicity, as shown by both histopathology and clinical chemistry at 3 days after uranium treatment. Low-dose SB did not show such marked effects. Our findings demonstrated that the uranium decorporation effect of sodium bicarbonate was observed at the dosage showing urine alkalinization in rats and that decorporation effect of sodium bicarbonate might be beneficial if it is administered immediately after incorporation of soluble uranium.