Ineffectiveness of pruning to control citrus huanglongbing caused by <Emphasis Type="Italic">Candidatus</Emphasis> Liberibacter americanus

The huanglongbing (HLB) disease of citrus trees, caused by Candidatus Liberibacter asiaticus and Ca. Liberibacter americanus, was first reported in Brazil in March, 2004. The presence of the disease has caused serious concerns among growers. Pruning experiments were conducted to determine if removal of symptomatic branches or the entire canopy (decapitation) would eliminate infected tissues and save HLB-affected trees. Pruning was done in five blocks on a total of 592 3- to 16 year-old ‘Valência’, ‘Hamlin’ or ‘Pêra’ sweet orange trees showing no symptoms or with two levels of symptom severity. Ten decapitated trees per block were caged and all trees were treated with insecticides to control the psyllid vector, Diaphorina citri. Mottled leaves reappeared on most symptomatic (69.2%) as well on some asymptomatic (7.6%) pruned trees, regardless of age, variety, and pruning procedure. Presence of the pathogen (Ca. Liberibacter americanus) in all symptomatic trees was confirmed by PCR. In general, the greater the symptom severity before pruning the lower the percentage of trees that remained asymptomatic after pruning.     

Rapid and simple mutation screening of G(M1) gangliosidosis in Shiba dogs by direct amplification of deoxyribonucleic acid from various forms of canine whole-blood specimens.

This report describes a rapid and simple method for mutation screening of G(M1) gangliosidosis in Shiba dogs by direct amplification of DNA from canine whole-blood specimens using a novel polymerase chain reaction (PCR) reagent cocktail, which can eliminate the DNA extraction process and amplify the genomic DNA directly from human or murine whole blood. The strategy of this mutation screening is based on the identification of a nucleotide deletion by restriction enzyme analysis, coupled with the direct PCR amplification. The target sequence of the canine beta-galactosidase gene could be amplified directly from various forms of canine whole-blood specimens, including anticoagulated blood, blood stored frozen for 1 year, dried blood held in filter paper for 1 year at room temperature, and dry powder of blood stripped from Giemsa-stained blood films, which had been prepared 10 years earlier, resulting in the determination of genotypes in all the specimens. This method simplified the molecular diagnosis and carrier screening of G(M1) gangliosidosis in Shiba dogs, making it simple to examine specimens from the large, widely distributed population of these dogs.     

Mycoplasma iowae species-specific DNA probe

A Mycoplasma iowae (MI) species-specific DNA probe (designated pMI-2) of 6.0 kbp (kilobase pairs) was isolated from an MI strain I-695 genomic library prepared in plasmid pUC8 and Escherichia coli strain JM83. When labeled with [32]P by nick translation, the probe hybridized in dot blot assays with 6 reference strains and 8 field isolates of MI but not with 16 other known species of avian mycoplasmas. The pMI-2 probe detected a minimum of 1.5 ng of MI strain I-695 chromosomal DNA. Under identical conditions of hybridization, the probe did not hybridize with a high concentration (200 ng) of M. gallisepticum or M. synoviae chromosomal DNA.     

Growing situation of afforested trees and damage to lower-story trees caused by felling in multi-storied forest management in Peninsular Malaysia

The growing condition of afforestation trees and damage to lower-story trees caused by felling and hauling of upper-story trees in a multi-storied forest in Peninsular Malaysia was surveyed. Seventy months have passed since the planting ofAcacia mangium upperstory trees, which have grown 233 m³/ha in volume. The growth ofShorea leprosula thirty-five months after planting of lower-story trees have reached 5.54 m in height. However, as the ratio of height to basal diameter exceeds 100:1, trees are tapering to a considerable degree. A backhoe was installed in order to fell the upper-story trees. From the results of logging, the damage ratio estimation of the lower-story trees was simulated by using the Monte Carlo method. The damage ratio differed considerably depending on planting patterns, height of upper-story trees and felling skills. The results of this survey proved that the felling and hauling of upper-story trees would be technically feasible in the future, except when one row upper-story trees and one row lower-story trees method were employed.     

Response of gas exchange rates in <Emphasis Type="Italic">Abies firma</Emphasis> seedlings to various additional stresses under chronic acid fog stress

In order to clarify the chronic influence of acid fog on the gas exchange rates of momi fir (Abies firma Sieb. et Zucc.) trees, we exposed them to simulated acid fog (pH 3) for 3 years. The composition of the acid fog was similar to that observed in a region where momi fir trees have been declining, and it contained organic acids. We then treated the firs with various additional stresses, such as drought, low temperature, fine root cutting, ozone exposure, soil acidification, nitrogen load, and rhizosphere aluminum stress. Under chronic exposure to acid fog, the momi fir seedlings exhibited a pattern of stomatal behavior whereby they excessively opened in summer and closed in winter. Furthermore, the stomata of these seedlings tended to open during drought stress, and their needles were visibly injured after ozone exposure. The net photosynthesis rates of the seedlings exposed to acid fog were regulated by their stomatal aperture, rather than directly by acid fog. These results suggest that acid fog exposure disturbs the control of stomatal function in the momi fir seedlings. In addition, we found that chronic acid fog exposure suppressed the decrease in net photosynthesis rate, due to its nitrogen load.     

Stand structure and the regeneration ofChamaecyparis pisifera (Sieb. et Zucc.) Endl. on sites with different soil development in an old-growth coniferous forest, central Japan

Stand structure and the regeneration ofChamaecyparis pisifera on sites with and without well-developed soil in an old-growth coniferous forest, Akasawa Forest Reserve, central Japan, were investigated, along with their relationships to other important coniferous species. Of stems ofC. pisifera≥5 cm diameter at breast height, stems with intermediate size were absent in stands on the developed-soil site, while those with smaller size increased in stands on the undeveloped-soil site, which supported a higher density ofC. pisifera. In the stands without recent tree-fall of canopy stems on the developed-soil site, canopy stems ofC. pisifera were distributed uniformly and the understory stems, patchily. On the other hand, both canopy and understory stems ofC. pisifera in stands on the undeveloped-soil site were distributed patchily. In the understory,C. pisifera occurred as clonal patches formed by vegetative reproduction on various types of microsites including bare rocks. However, the clonal patches did not occur in a stand on the developed-soil site with dense saplings of an evergreen conifer,Thujopsis dolabrata, which can expand vegetatively with a well developed soil layer. Gap formation may induceC. pisifera to develop tree-form stems from shrubby clonal patches. On developed-soil sites,C. pisifera stands that survive a long disturbance-free period on this site need catastrophic disturbance for their regeneration, which will eliminateT. dolabrata in the understory and create bare soil for colonization ofC. pisifera from seeds. On undeveloped-soil sites,C. pisifera replaces itself continuously by effective vegetative reproduction. Ground instability and the wet condition of this site may promote the replacement.     

Initial shapes of stress-strain curve of wood specimen subjected to repeated combined compression and vibration stresses and the piezoelectric behavior

This study investigated the relationship between the initial shape of the stress (σ)-strain (ε) curve of a Chamaecyparis obtusa wood specimen subjected to repeated combined compression and vibration stresses at various angles between the fiber direction and load direction and the piezoelectric behavior. The main findings of the study are: (1) the σ-ε curve became convex initially, and then the stress was proportional to the strain. The σ-ε curve had almost the same shape during both loading and unloading. (2) The σ-piezoelectric voltage (P) curve was nonlinear, with a maximal point or cusp on the curve, which had almost the same shape during both loading and unloading, as was also observed for the σ-ε curve. (3) The plot of the first derivative of the stress [dσ/dε (= σ′)] against ε was nonlinear. The σ′-ε and P-ε curves at various angles were fairly similar. (4) The stress at the maximal point (or cusp) of the σ-P curve decreased with an increase in the angle between the fiber direction and load direction. The tendency of the stresses was very similar to that of Young’s modulus and compression strength calculated from Hook’s law and Hankinson’s law, respectively.     

The influences of boiling and drying treatments on the behaviors of tension wood with gelatinous layers in <Emphasis Type="Italic">Zelkova serrata</Emphasis>

This study examined how boiling and drying treatments influenced various physical properties of the tension wood with gelatinous fibers (G-fibers) of a 29-yearold Zelkova branch. By boiling treatment, tension wood with numerous G-fibers contracted considerably in the longitudinal direction and the longitudinal Young’s modulus decreased in spite of the water-saturated condition. The drying treatment caused green tension wood and boiled tension wood with numerous G-fibers to shrink longitudinally and increased their longitudinal Young’s moduli. These specific behaviors in tension wood were highly correlated with the proportion of G-fibers in a specimen and were probably caused by the microscopic behavior of cellulose microfibril (CMF) in the gelatinous layers (G-layers). The longitudinal shrinkage of tension wood due to drying suggests the existence of a hygro-sensible, noncrystalline region in the CMF, which is abundant in the G-layer. Furthermore, the noncrystalline region in the CMF softens during boiling treatment, resulting in the reduction of the longitudinal Young’s modulus in tension wood. The longitudinal contraction of tension wood with G-fibers by boiling might be caused by the tensile growth stress remaining in green G-layers. However, no changes were detected in the 004 d-spacing of cellulose crystal in tension wood from the boiling and drying treatments, regardless of the proportion of G-fibers.