渡良濑游水地土壤微生物群落结构与功能研究

利用BIOLOG和磷脂脂肪酸(PLFA)技术,研究了受足尾铜矿废水影响下的日本西那须地区渡良濑游水地东、西两侧土壤生物学特性、微生物群落结构及功能变化.结果表明:东侧(对照区)土壤全铜含量为45.07mg/kg,有效态铜含量为0.42 mg/kg,同西侧相比,平均降低了19.32%和89.95%.土壤呼吸速率主要受土壤有效态铜、土壤有机质和C/N的影响,随土层深度增加,土壤微生物量氮和溶解性氮都迅速减小,东侧土壤具有较强的氮矿化能力,渡良濑游水地东、西两侧0-5 cm土层土壤的微生物群落生理代谢剖面在培养48 h后出现明显变化;土壤微生物群落的平均颜色变化值(AWCD)随培养时间的延长,趋于平缓增加.在48 h时培养后,西侧位点土壤的AWCD值与东侧相比,分别下降了40%,34%和16%;除B位点样品在20-40 cm土层深度的AWCD略高于其它3个位点外,其余样品的AWCD无明显差异.渡良濑游水地东侧土壤微生物对单一碳源底物的利用能力较高,土壤微生物群落利用碳源的功能多样性也较高.渡良濑游水地西侧区域C位点土壤的格兰仕阳性菌、格兰仕阴性菌、放线菌数量均显著高于东侧A位点,但渡良濑游水地东侧区域土壤3大类群微生物中细菌和放线菌比例更高.在渡良濑游水地自然恢复30多年后,东、西两侧土壤微生物群落结构与功能仍存在较明显的差异.     

Adherence of Actinobacillus pleuropneumoniae serotype 1 to swine buccal epithelial cells involves fibronectin

The swine pathogen Actinobacillus pleuropneumoniae serotype 1 was investigated for its ability to adhere to swine, rat, and human buccal epithelial cells (BEC). The highest number of bacteria adhered was to swine BEC. This binding ability was affected by heating, extreme pH, treatment with sodium dodecyl sulfate, ethylenediamine tetraacetate, or periodate, and proteolysis, suggesting that cell-surface glycoproteins participate in adherence and that adherence is based mostly on ionic interactions. Mannose and swine fibronectin may play a direct role in this interaction. Convalescent-phase serum from naturally infected pigs inhibited the adhesion. There was a correlation between bacterial pathogenicity as well as host specificity and the capacity for adherence to swine BEC. Adhesion to swine BEC provides a convenient method to study in vitro the adherence of A. pleuropneumoniae and other pathogens of the pig respiratory tract.     

Inoculation of ectomycorrhizal fungi contributes to the survival of tree seedlings in a copper mine tailing

To advance our understanding of the effects of inoculation with ectomycorrhizal fungi (EMF) on seedling colonization in mine wastelands, we conducted a field experiment in a copper tailing. Six-month-old seedlings of Japanese red pine (Pinus densiflora) and oak (Quercus variabilis) separately inoculated with three EMF species (Pisolithus sp., Cenococcum geophilum, Laccaria laccata) were transplanted to the copper tailing. The survival rates of tree seedlings were monitored monthly, and growth (biomass and height), contents of nutrients and heavy metals (K, P, Ca, Mg, Cu, Zn), and mycorrhizal infection rates of seedlings were determined 6 months after planting. Oak seedlings exhibited higher survival rates than pine seedlings after 6 months of growth on the tailing. EMF inoculations of pine seedlings significantly enhanced their survival, growth, and nutrient uptake. In contrast, EMF inoculations of oak seedlings improved growth only in terms of biomass. Additionally, EMF inoculation caused pine seedlings to accumulate more Cu and Zn in roots compared to non-inoculated seedlings, whereas inoculation inhibited the accumulation of heavy metals in shoots. However, similar results were not observed in oak seedlings. Observations of roots indicated that the rates of mycorrhizal infection of both tree species had dramatically declined at harvest time. In conclusion, ectomycorrhizal symbioses can improve the survival and performance of pine seedlings in mine tailings. The present study provided direct evidence of the importance of EMF inoculation of seedlings to the reforestation of mine wastelands.     

The vitamin A requirement and the vitamin A status of growing cattle. 1. Studies of calves

Five experiments with 18 to 36 male calves each of the black and white dairy cattle breed (age: 14-21 days, initial live weight: approximately 45 kg per animal) were carried out in order to investigate the influence of various vitamin A supply (0-80,000 IU per 100 kg LW and day) on dry matter intake and weight gain as well as the vitamin A status of liver and blood plasma over 84 days. The calves consumed a diet free of carotene and vitamin A consisting of milk replacer, concentrate and chopped wheat straw. The calves were fed in three experiments for a longer time in order to observe the further vitamin A depletion. Nine animals consumed an unsupplemented ration, nine other one got 10,000 IU vitamin A per 100 kg LW and day. Biopsies of liver and plasma samples were taken from 4 animals per group every four weeks. The various vitamin A supplementation did not significantly influence the dry matter intake (Mean: 1.67; 1.48 to 1.80 kg DM per animal and day) and the weight gain of calves (Mean: 702, 599 to 770 g per animal and day). First vitamin A deficiency symptoms (reduced feed intake, decreased weight gain, diarrhoea etc.) were observed in animals of unsupplemented group after 100 days of experiments. After 84 days the vitamin A concentration of liver of animals of unsupplemented groups decreased to 1.3-32.2% compared with the begin of experiments (60.6-155.7 mumol/kg fresh matter). Up to 51% of initial concentration were found when 10,000 IU vitamin A per 100 kg LW and day were fed. About 25,000 IU vitamin A per 100 kg LW and day were required in order to keep the initial level of vitamin A concentration of liver. The plasma vitamin A concentration is unsuitable for estimation of vitamin A status of calves. The concentration of vitamin A of liver and plasma amounted to 114 mumol per kg and 0.25 mumol per litre at the begin of experiments. The vitamin A concentration of liver of unsupplemented group decreased to 20 mumol per kg, that of plasma increased to 0.28 mumol per 1 at the end. A strong vitamin A deficiency (liver concentration: less than 10 mumol/kg) may cause a decrease of vitamin A concentration of blood.     

Allometric model of the height–diameter curve for even-aged pure stands of Japanese cedar (<Emphasis Type="Italic">Cryptomeria japonica</Emphasis>)

We derived an allometric model of the height–diameter curve for even-aged pure stands, which was a modification of the earlier model proposed by Inoue (2000a). An individual-dependent allometric equation was used as the height–diameter curve. Using the discriminant analysis method, all trees composed of a stand were stratified into upper and lower trees. It was assumed that both relationships between mean tree height H _m and upper tree height H _u and between mean DBH D _m and mean DBH of upper trees D _u could be described by the time-dependent allometric power equations. The height–diameter curve showed an average relationship between tree height and DBH of a given stand at a given time, and hence it could be assumed that the height–diameter curve contained two points (D _m , H _m ) and (D _u , H _u ). With these assumptions, we derived an allometirc model of height–diameter curve, which allowed the coefficients of the curve to be estimated from mean tree height and mean DBH. The proposed model was fitted to Japanese cedar (Cryptomeria japonica D. Don) data. The error ratio of the allometric model ranged from 2.254% to 13.412% (mean = 6.785%), which was significantly smaller than that of the earlier model. When the error of mean tree height was ±1.0 m or less, the effect of the error of mean tree height on the error ratio was comparatively small. This suggested that the error of ±1.0 m in mean tree height could be accepted in the estimation of height–diameter curve using the allometric model. These features enable us to combine the allometric model with Hirata’s vertical angle-count sampling or growth models. In conclusion, the allometric model would be one of the most practical and convenient approaches for estimating the height–diameter relationship of even-aged pure stands.     

The relative plasma availabilities of ivermectin in reindeer (Rangifer tarandus tarandus) following subcutaneous and two different oral formulation applications

Background

Overwintering (breeding) reindeer (Rangifer tarandus tarandus) are commonly treated with ivermectin against parasitic infestations once yearly in autumn-winter roundups. The only preparations registered to reindeer are those for subcutaneous injection. However, also oral extra-label ivermectin administration is used. Twenty-six, 8-month-old reindeer calves were randomly allocated into three groups. Group 1 (n = 9) received oral ivermectin mixture (Ivomec® vet mixt. 0.8 mg/ml, oral ovine liquid drench formulation), Group 2 (n = 9) oral ivermectin paste (Ivomec® vet 18.7 mg/g equine paste), and Group 3 (n = 8) subcutaneous injection of ivermectin (Ivomec® 10 mg/ml vet inj.), each group at a dose of 200 μg/kg body weight. Blood samples were collected at treatment and at days 1, 2, 3, 6, 9 and 16 post treatment. Plasma concentrations of ivermectin were determined by high-pressure liquid chromatography (HPLC) with fluorescence detection.

Results

The peak plasma concentration (C_max) was reached by 2 days after each treatment. The C_max and Area Under Curve (AUC) differed significantly between the groups: C_max was 30.2 ± 3.9, 14.9 ± 5.7 and 63.1 ± 13.1 ng/ml, and AUC_∞ was 2881 ± 462, 1299 ± 342 and 6718 ± 1620 ng*h/ml for groups 1, 2 and 3, respectively (mean ± standard deviation).

Conclusions

The differences in plasma concentrations of ivermectin are concomitant with earlier observed differences in antiparasitic efficacy, which discounts the use of the equine paste in reindeer in favour of the oral ovine liquid drench formulation, or preferably, the reindeer-registered subcutaneous injection formulation.     

Seasonal and temporal changes in species use of the landscape: how do they impact the inferences from multi-scale habitat modeling?

Context

Multi-scale approaches to habitat modeling have been shown to provide more accurate understanding and predictions of species-habitat associations. It remains however unexplored how spatial and temporal variations in habitat use may affect multi-scale habitat modeling.

Objectives

We aimed at assessing how seasonal and temporal differences in species habitat use and distribution impact operational scales, variable influence, habitat suitability spatial patterns, and performance of multi-scale models.

Methods

We evaluated the environmental factors driving brown bear habitat relationships in the Cantabrian Range (Spain) based on species presence records (ground observations) for the period 2000–2010, LiDAR data on forest structure, and seasonal estimates of foraging resources. We separately developed multi-scale habitat models for (i) each season (spring, summer, fall and winter) (ii) two sub-periods with different population status: 2000–2004 (with brown bear distribution restricted to the main population nuclei) and 2005–2010 (with expanding bear population and range); and (iii) the entire 2000–2010 period.

Results

Scales of effect remained considerably stable across seasonal and temporal variations, but not the influence of certain environmental variables. The predictive ability of multi-scale models was lower in the seasons or periods in which populations used larger areas and a broader variety of environmental conditions. Seasonal estimates of foraging resources, together with LiDAR data, appeared to improve the performance of multi-scale habitat models.

Conclusions

We highlight that the understanding of multi-scale behavioral responses of species to spatial patterns that continually shift over time may be essential to unravel habitat relationships and produce reliable estimates of species distributions.

     

Injection molding of vertebral fixed cage implant

A vertebral cage is a hollow medical device which is used in spine surgery. By implanting the cage into the spine column, it is possible to restore disc and relieve pressure on the nerve roots. Most cages have been made of titanium alloys but they detract the biocompatibility. Currently PEEK (polyether ether ketone) is applied to various implants because it has good properties like heat resistance, chemical resistance, strength, and especially biocompatibility. A new shape of vertebral cage is designed and injection molding of PEEK is considered for production. Before injection molding of the cage, it is needed to evaluate process conditions and properties of the final product. Variables affecting the shrinkage of the cage are considered, e.g., injection time, packing pressure, mold temperature, and melt temperature. By using the numerical simulation program, MOLDFLOW, several cases are studied. Data files obtained by MOLDFLOW analysis are used for stress analysis with ABAQUS, and shrinkage and residual stress fields are predicted. With these results, optimum process conditions are determined.