Use of molecular markers to accelerate the breeding of common bean lines resistant to rust and anthracnose

The main goal of this work was to introduce resistance genes for rust, caused by Uromyces appendiculatus, and anthracnose, caused by Colletotrichum lindemuthianum, in an adapted common bean cultivar through marker-assisted backcrossing. DNA fingerprinting was used to select plants genetically closer to the recurrent parent which were also resistant to rust and to race 89 of C. lindemuthianum. DNA samples extracted from the resistant parent (cv. Ouro Negro), the recurrent parent (cv. Rudá), and from BC₁, BC₂ and BC₃ resistant plants were amplified by the RAPD technique. The relative genetic distances in relation to the recurrent parent varied between 9 and 59% for BC₁, 7 and 33% for BC₂, and 0 and 7% for BC₃ resistant plants. After only three backcrosses, five lines resistant to rust and anthracnose with, approximately, 0% genetic distance in relation to the recurrent parent were obtained. These lines underwent field yield tests in two consecutive growing seasons and three of them presented a good yield performance, surpassing in that sense their parents and most of the reference cultivars tested.     

Simulation of the Dispersion of Pollutants Using two Approaches for the Case of a Low Source in the Sbl: Evaluation of Turbulence Parameterisations

An Eulerian model and a Lagrangian particle model are used to study the dispersion of a contaminant released from a low source in the Stable Boundary Layer (SBL) using two different turbulence parameterisations. The Eulerian model is based on the solution of the advection–diffusion equation by the Laplace transform technique. The Lagrangian model is based on a generalized form of the Langevin equation. The first parameterisation, Degrazia et al. (2000), is based on Taylor’s statistical diffusion theory and the observed spectral properties, supposes a linear combination between shear and buoyancy turbulence. The second, Hanna (1982), is based on observed spectral properties from Minnesota Planetary Boundary Layer (PBL) observations and is widely used in pollutant dispersion models. Considering that these simulations are in the SBL, the analysis of the results shows a reasonably good agreement between the values computed by the models against the experimental ones for the two turbulence parameterisations.     

Direct measurement of the current-phase relation of a superfluid 3He-B weak link

Direct measurements of the current-phase relation, I versus Deltaphi, for a weak link coupling two reservoirs of B-phase superfluid helium-3 (3He-B) were made over a wide range of temperatures. The weak link consists of a square array of 100-nanometer-diameter apertures. For temperatures T such that T/Tc >/= 0.6 (where Tc is the superfluid transition temperature), I approximately sin(Deltaphi). At lower temperatures, I(Deltaphi) approaches a straight line. Several remarkable phenomena heretofore inaccessible to superconducting Josephson junctions, including direct observation of quantum oscillations and continuous knowledge of Deltaphi, were also observed.     

Novel application of square-wave adsorptive-stripping voltammetry for the determination of xanthohumol in spent hops

This paper reports the development of a novel electrochemical assay for xanthohumol (XN) by square-wave adsorptive-stripping voltammetry (SWAdSV) with a hanging mercury drop electrode. The method showed good repeatability (CV < 2%) and linearity (between 10 and 250 μg L(-1)), as well as suitable limits of detection (2.6 μg L(-1)) and quantification (8.8 μg L(-1)). The method was applied for the quantification of this compound in spent hops, and the results obtained were compared with the HPLC-UV method. XN contents determined by the SWAdSV method were 16 ± 1 and 100 ± 4 μg L(-1) for aqueous and methanolic extracts, respectively. The developed new methodology considerably reduces the analysis time, approximately from 25 min (HPLC-UV method) to 7 min, enabling a high sample throughput. In addition, the detection and quantification limits were approximately 5-fold lower than those obtained with the chromatographic method.     

Source of polynuclear aromatic hydrocarbons found in sediment in a region of expanding sugarcane cultivation of São Paulo State,Brazil

Purpose

Polycyclic aromatic hydrocarbons (PAHs) are unintentional products that are classified as persistent toxic substances. The goal of the present study was to generate data on the presence of 15 priority PAHs that are found in surface sediment and core sediment in the region of the Turvo/Grande watershed, São Paulo State, Brazil, which is an area of expanding sugarcane cultivation, and to correlate these data with the sources of these PAHs and the guiding values for sediment quality analysis.

Materials and methods

Surface sediments and sediment cores were sampled during the rainy and dry seasons in February and July 2010. The extraction of PAHs from sediments was performed using a Soxhlet extractor, and then the extract was cleaned according to the methods of the US EPA 3630C (US EPA 1996) using a silica gel column. Quantification was performed using high performance liquid chromatography with fluorescence detection.

Results and discussion

The concentrations of all 15 PAHs decreased as the depth of the sediment core increased. Overall, the concentrations decreased along the sediment core; however, the RTURARG (region predominantly used for planting sugarcane and livestock) during the rainy season and the CAPRP sampling site (located at part of the Preto River dam) during the dry season showed increased concentrations in the first few sediment fractions, and then the concentrations decreased. Higher concentrations were observed in urban locations, and the concentration of naphthalene was higher than the probable effect level (PEL) determined by the Canadian environmental agency. The obtained diagnostic ratios indicate that the sediment from areas with an abundance of sugarcane was a pyrolytic source of PAHs, which indicates a contribution from burning straw to the PAH concentrations in those areas.

Conclusions

For all sampling sites and all PAHs, we found a decreasing trend in PAH concentrations with increasing sediment core depth, and the locations, such as CAPRP, that experienced a higher level of human activity had the highest total concentrations of PAHs. These locations were the only areas in which the PAH naphthalene was found in higher concentrations than the PEL. The diagnostic ratios reveal that regions with sugarcane plantations had predominantly pyrolytic sources of PAHs, indicating the contribution of PAHs from sugarcane straw burning.

     

Stabilization of soybean oil with heated quercetin and 5-caffeoylquinic acid in the presence of ferric ion

The effect of heated quercetin (400 mg/kg of oil) or 5-caffeoylquinic acid (5-CQA) and the presence of ferric ion (2.2 mg/kg of oil) on the stability of soya oil oxidized in an oxidative stability index (OSI) instrument was investigated. After heating the phenolic at 100 degrees C or 150 degrees C, the OSI values of treated oils were not significantly (p < 0.001) different, whereas, at 200 degrees C, the values decreased significantly with addition of quercetin, but not with 5-CQA. However, the antioxidative activity of quercetin remained significantly greater than that of 5-CQA. The antioxidative potency of quercetin was reduced significantly by addition of ferric palmitate (FP), but that of 5-CQA was not. Reaction between the ortho-dihydroxy groups of the quercetin and ferric ion may reduce the number of hydroxyls available to react with free radicals. Chelating action of 5-CQA might be provided by ortho-dihydroxy grouping of the quinic acid moiety.     

Controlling microbial contamination on beef and lamb meat during processing

SUMMARY The microbiological quality of carcases, meat and environmental surfaces was evaluated in commercial boning rooms processing beef and lamb. There was considerable variation in the level of microbial contamination on both carcases and meat, with counts ranging from less than 20 to 10⁸/cm² on carcases and to 2 times 10⁷/cm² on meat. The level of microbial contamination on meat was influenced by the level of carcase contamination at boning and by the boning process itself. Carcase contamination was the major determinant of microbiological quality, as more than 70% of carcases had microbial counts greater than 10³/cm². Cutting boards were a major source for microbial dissemination during boning, particularly when carcase counts were less than 10³/cm². If carcases were heavily contaminated, the contamination of processing surfaces was irrelevant in determining microbial loads on meat. Where carcase contamination was at low to moderate levels, the contribution of the boning process to the contamination on meat assumed increased significance. Under these conditions, improved sanitation of cutting surfaces in the boning room resulted in a significant reduction in microbial contamination on the surface of meat. These results can form the basis for ensuring that improvements made in carcase management before boning, to improve microbiological quality, will be preserved through attention to cutting board hygiene during boning.     

Effectiveness of passive gas-scavenging canisters attached to isoflurane anesthesia systems under standard-use conditions in a laboratory animal facility

Chronic exposure to trace levels of waste anesthetic gases has been linked to higher incidences of neurologic and reproductive dysfunction, hepatic and renal toxicity, and neoplasia in health care professionals. We have shown that low levels of isoflurane emissions are likely in conventional laboratory animal treatment rooms during the use of standard anesthesia delivery systems equipped with activated charcoal canisters for passive gas scavenging. In the present study, we surveyed the effectiveness of canisters (attached to well‐maintained precision isoflurane vaporizers) in current use throughout our AAALAC‐accredited laboratory animal facility. Canisters (Omnicon f/air) had been weighed prior to use and then attached to dual‐loop systems (face mask and induction box circuits) from 1 week to 6 months of service. Isoflurane emissions were measured using a pre‐calibrated, portable infrared spectrophotometer by attaching each canister to the face‐mask circuit, occluding the face mask and closing the stopcock to the induction circuit, and running the system at uniform isoflurane concentration (2%) and oxygen flow rate (1 L minute^?1). Samples were taken in animal procedure rooms (size range, 45–80 m³) in which the air turnover rate ranged between 20 and 30 nonrecirculating changes per hour. Nine of the 60 canisters (15%) in current use were found to have exceeded the manufacturer's recommended use‐life (defined as a weight increase of 50 g). Of these nine, seven canisters did not scavenge isoflurane at all (indicated by emissions greatly exceeding 100 ppm). Isoflurane was not detected in the operator's breathing zone under normal use conditions (i.e. gas directed to both circuits at once). Of the 51 canisters that had not exceeded their rated use‐life, 12 (23.5%) exhausted isoflurane at >2 ppm. Our data show that (i) the potential for exposure to waste isoflurane emissions will depend on the configuration of the delivery system and that (ii) enhanced attention to canister surveillance may be warranted even in well‐run facilities.     

The isolation of salmonella from kangaroos and feral pigs processed for human consumption

A total of 154 feral pig carcases and 81 kangaroo carcases were examined for the presence of Salmonella, coliforms and total aerobic counts. Approximately 34% of pig carcases yielded one or more serotypes of Salmonella, while about 11% of kangaroo carcases were contaminated with salmonella. The results differed widely between sampling occasions. A total of 13 serotypes were isolated from feral pigs with S. anatum (31 isolates) and S. typhimurium (9 isolates) being the predominant serotypes. Coliforms were isolated from approximately 90% of carcases. The mean log10 coliform count on feral pigs was 4.39 +/- 1.45/g and the mean log10 total count was 6.15 +/- 1.15/g. About 21% of carcases were contaminated with more than 100,000 coliforms/g. A total 3 serotypes were isolated from kangaroos (S. bahrenfeld, S. binza, and S. onderstepoort). The mean log10 coliform count on kangaroos was 3.54 +/- 1.04. More than 50% of kangaroo carcases were contaminated with less than 100 coliforms/g. About 15% of carcases were contaminated with more than 10,000 coliforms/g. The mean log10 total count was 5.2 +/- 1.01/g.