Different carbon sources affects biofloc volume,water quality and the survival and physiology of African catfish <Emphasis Type="Italic">Clarias gariepinus</Emphasis> fingerlings reared in an intensive biofloc technology system

A 6-week experiment was performed to compare different carbon sources, i.e. sucrose, glycerol and rice bran, to a nitrogen ratio of 15:1 in a biofloc-based African catfish Clarias gariepinus culture system. Catfish survival, growth, whole-body proximate composition, body indices, liver histopathology and glycogen content were measured. Each treatment was triplicated in glass aquaria with each replicate containing 50 fish (500 fish/m³) with an initial weight ± SD of 5.06 ± 0.05 g. Glycerol significantly increased total biofloc production, and both the sucrose and glycerol treatments generally had lower nitrogenous levels, compared to the control. These levels spiked at week 2 in the rice bran treatment, leading to significantly lower survival compared to all other treatments. At both weeks 3 and 6, liver histopathology of fish in the rice bran treatment revealed substantial vacuolation and less glycogen while the highest was in fish from the glycerol treatment. Fish growth was unaffected among the treatments, but survival was highest in the glycerol treatment. Rice bran appears unsuitable for C. gariepinus, likely due to being a slower-releasing carbon source. Instead, glycerol is recommended based on significantly higher biofloc production and subsequently improved water quality and survival of C. gariepinus during their nursery culture.     

Optimization of alkaline hydrolysis of paddy straw for ferulic acid extraction

Response Surface Methodology (RSM) via Central Composite Design (CCD) was used to optimize the alkaline hydrolysis of paddy straw to improve ferulic acid extraction. The parameters involved, namely temperature (°C), concentration of NaOH (M) and duration of extraction (h) are screened by Full Factorial Studies (FFD). The result obtained from FFD was 0.518% (5.18 mg/g). The interactions between each parameters involved were studied using Central Composite Design (CCD). Upon optimization, the percentage of ferulic acid improved from 0.518% to 0.817% (8.17 mg/g). The optimum conditions obtained from this study are 125 °C, 3.90 M, 2.30 h for temperature, concentration of NaOH and extraction time, respectively. This result shows a significant improvement than the previous published work. Details of the experimental design, statistical analysis and interpretation are discussed below.     

Genetic parameters and correlated responses in female reproductive traits in the GIFT strain

The effect of selection for greater growth rate in the GIFT strain on traits related to female reproduction (weight at spawning, number of eggs, number of fry, total weight of fry and number of dead fry) was studied. Available records comprised 10 generations of data from a total of 935 breeding females with known pedigree. Female body weight at spawning was 255 g, whereas the averages for number of eggs, number of live fry at hatching, number of dead fry and total fry weight per spawning were 1444, 908, 64.90, and 7.24 g respectively. Heritabilities for reproductive traits were low to moderate (0.20 for number of eggs, 0.16 for number of hatched fry and 0.11 for fry weight per female at spawning). The genetic correlations between female body weight at spawning and reproductive traits were very low to low (0.01 to 0.31) and not significantly different from zero. The genetic correlations among reproductive traits (i.e. number of eggs, number of hatched fry and fry weight) were high (0.75 to 0.92). Phenotypic correlations were consistent with the genetic correlations, ranging from 0.56 to 0.85. Correlated responses in reproductive traits measured as differences in least squares means between Selection and Control lines were positive and significant (except for the number of dead fry) when age of females at spawning was fitted as a covariate. However, there were no significant differences in all studied traits when body weight of the female at spawning was fitted as a covariate within lines. This indicates that the greater reproductive rate was due to the greater size of females in the Selection line, but the efficiency of reproduction per unit weight of female did not change as a consequence of selection for growth.     

Biochemical composition and photosynthetic activity of Pongamia pinnata（L.） Pierre in response to acute 60Co γ-irradiation

To elucidate the potential and sensitivity of cirradiation in Pongamia pinnata,the present study has been done by irradiating the air-dried seeds to differentγ-irradiation doses(100 Gy,200 Gy,400 Gy and 600 Gy),using 60Co source.Significant increase(p≤0.05)in the germination,growth,and vigor was recorded under the100 Gy treatment than the control set.The chlorophylla and total chlorophyll content(mgg-1 FW)in the leaves of P.pinnata showed a significant decrease under the higher irradiation treatments(200 Gy,400 Gy and 600 Gy).In contrast,chlorophyllb showed a radio-resistance up to 200 Gy dose,and above which its concentration declined significantly(p≤0.05).Photosynthetic rate,stomatal conductance,intercellular CO2 concentration,and transpiration rate were stimulated by 100 Gy irradiation treatment and the higher doses inhibited these parameters.Antioxidant activity in the leaves of P.pinnata tended to increase after irradiation in a dose-dependent manner.All the plants under different treatments ofγ-irradiation showed stimulation in production of proline,flavonoid,and phenolic content in comparision to the control.The findings of the present study showed thatγ-irradiation treatment stimulates the secondary metabolite production(proline,flavonoid and phenolic)and favours faster growth of P.pinnata.     

Optimizing nitrogen levels combined with gibberellic acid for enhanced yield, photosynthetic attributes, enzyme activities, and artemisinin content of Artemisia annua

Artemisia annua L. is an aromatic-antibacterial herb that destroys malarial parasites, lowers fever, and checks bleeding, and from which the secondary compound of interest is artemisinin. It has become increasingly popular as an effective and safe alternative therapy against malaria, and its derivatives are effective against multidrug resistant Plasmodium falciparum strains. Nitrogen is required by the plants in the largest quantity and is most limiting where biomass production is desired. On the other hand, gibberellic acid plays an important role in flowering, growth, and development and also in other physiological and biochemical processes. The feasibility of foliar GA₃ (75 mg·L⁻¹) alone or with varying levels of soil applied nitrogen (40, 80, and 120 mg·kg⁻¹ soil) was tested on A. annua in the present study. The application of GA₃ proved effective in alleviating the growth, photosynthesis, and enzyme activities of A. annua. However, N levels combined with GA₃ showed better responses, and further improvement in these parameters was observed. Furthermore, the most important task we were interested in was to increase the artemisinin content and its yield on a per plant basis. The N combination (80 mg·kg⁻¹ soil) together with GA₃ augmented the content (21.8% more) and yield (55.8% more); this is true for both the treated plants, which were more than the control.     

Comparison of three processing methods for laminated bamboo timber production

Three processing techniques, split-squaring(SS),V-grooving(VG), and split-edging(SE), were evaluated and compared in terms of their processing time and recovery. Semantan bamboo(Gigantochloa scortechinii Gamble) was used as a raw material and the results showed that the VG-method required the longest processing time(32.1 min), followed by the SS-method(18.2 min), and the SE-method(17.9 min). However, the VG-method showed the highest recovery(82.0%) compared to the SS-method and SE-method, 31.0 and 49.4%, respectively. When both processing time and recovery factors were combined with the same weighing factor, the highest value was recorded with the VG-method(49.1), while the SE-method had values of 31.1 and the SS-method 12.8. The results suggest that the VG-method is the best option. However, the V-grooving machine is still a prototype and therefore the SE-method could be an alternative option until the improved V-grooving machine is available.     

Allelic segregation of sex‐linked microsatellite markers in Nile tilapia (Oreochromis niloticus) and validation of inheritance in YY population

Stocking of all‐male fingerling produced by direct administration of male hormone 17‐α‐methyltestosterone is the most preferred method for present‐day aquaculture of the Nile tilapia Oreochromis niloticus. However, due to the growing concern of negative impact of steroid hormone in food fish, production of ‘genetically male’ tilapia, which depends on the concrete and thorough understanding of sex determination, has long been a scientific curiosity. The objective of the present study was to identify reliable sex‐linked markers and to evaluate the applicability of those markers in terms of monosex production approach. ‘XY’ neofemales were produced by using synthetic oestrogen and identified through selective breeding and progeny testing. Three females with progeny not deviating from 3:1 sex ratio (male:female) were designated as ‘XY’ neofemales and were used subsequently to produce putative YY progeny. Among the fifteen microsatellite markers tested, marker ARO172 was most informative in differentiating male and female genotypes. Twenty‐seven F₂ fish from three families were identified as putative YY males based on marker genotyping, and four of them were crossed to produce F₃ to validate marker association by progeny testing. The YY males produced 86%–100% male progeny indicating ARO172 a unique sex‐linked marker applicable in marker‐assisted selection.     

Sediment accretion and variability of sedimentological characteristics of a tropical estuarine mangrove: Kemaman, Terengganu, Malaysia

This paper reports on a study of accretion rate and sedimentological variability in a estuarine mangrove swamp. One hundred and sixteen stations were monitored for 2 years. In addition, surface sediment samples were collected at 52 stations during the months of May, June and July (1994) to represent the nonmonsoon sediments and November, December (1994) and January (1995) to represent the monsoon sediments. Results show that the accretion rate for the first year was 1.46±0.13cm/yr and 0.66±0.04cm/yr for the second year thus making the average accretion for the 2 years period to be 1.06cm/yr. The average accretion rate for the monsoon season (0.26 ± 0.04cm/month) was found to be significantly higher than the nonmonsoon season (0.12 ± 0.03cm/month). Nevertheless, the same is not true for the surface sediment characteristics. The sedimentological characteristics between the monsoon and the nonmonsoon sediments were not significantly different.