Electrochemical Production of Ferrate (Iron VI): Application to the Wastewater Treatment on a Laboratory Scale and Comparison with Iron (III) Coagulant

This paper presents a comparative study of the performance of ferrate(VI), FeO ₄ ^2? , and ferric, Fe(III), towards wastewater treatment. The ferrate(VI) was produced by electrochemical synthesis, using steel electrodes in a 16 M NaOH solution. Domestic wastewater collected from Hailsham North Wastewater Treatment Works was treated with ferrate(VI) and ferric sulphate (Fe(III)). Samples were analysed for suspended solids, chemical oxygen demand (COD), biochemical oxygen demand (BOD) and P removal. Results for low doses of Fe(VI) were validated via a reproducibility study. Removal of phosphorous reached 40% with a Fe(VI) dose as low as 0.01 mg/L compared to 25% removal with 10 mg/L of Fe(III). For lower doses (<1 mg/L as Fe), Fe(VI) can achieve between 60% and 80% removals of SS and COD, but Fe(III) performed even not as well as the control sample where no iron chemical was dosed. The ferrate solution was found to be stable for a maximum of 50 min, beyond which Fe(VI) is reduced to less oxidant species. This provided the maximum allowed storage time of the electrochemically produced ferrate(VI) solution. Results demonstrated that low addition of ferrate(VI) leads to good removal of P, BOD, COD and suspended solids from wastewater compared to ferric addition and further studies could bring an optimisation of the dosage and treatment.     

Conductive 3D structure nanofibrous scaffolds for spinal cord regeneration

The complex nature of spinal cord injuries has provided much inspiration for the design of novel biomaterials and scaffolds which are capable of stimulating neural tissue repair strategies. Recently, conductive polymers have gained much attention for improving the nerve regeneration. In our previous study, a three-dimensional (3D) structure with reliable performance was achieved for electrospun scaffolds. The main purpose in the current study is formation of electrical excitable 3D scaffolds by appending polyaniline (PANI) to biocompatible polymers. In this paper, an attempt was made to develop conductive nanofibrous scaffolds, which can simultaneously present both electrical and topographical cues to cells. By using a proper 3D structure, two kinds of conductive scaffolds are compared with a non-conductive scaffold. The 3D nanofibrous core-sheath scaffolds, which are conductive, were prepared with nanorough sheath and aligned core. Two different sheath polymers, including poly(lactic-co-glycolic acid) PLGA and PLGA/PANI, with identical PCL/PANI cores were fabricated. Nanofibers of PCL and PLGA blends with PANI have fiber diameters of 234±60.8 nm and 770±166.6 nm, and conductivity of 3.17×10^-5 S/cm and 4.29×10^-5 S/cm, respectively. The cell proliferation evaluation of nerve cells on these two conductive scaffolds and previous non-conductive scaffolds (PLGA) indicate that the first conductive scaffold (PCL/ PANI-PLGA) could be more effective for nerve tissue regeneration. Locomotor scores of grafted animals by developed scaffolds showed significant performance of non-conductive 3D scaffolds. Moreover, the animal studies indicated the ability of two new types of conductive scaffolds as spinal cord regeneration candidates.     

An efficient in vitro shoot regeneration through direct organogenesis from seedling-derived petiole and leaf segments and acclimatization of Ficus religiosa

Prolific and rapid in vitro plant organogenesis via direct regeneration has been obtained from axenic seedling-derived petiole and leaf explants of Ficus religiosa in Murashige and Skoog (MS) medium containing different concentrations of cytokinins in combination with indole-3-butyric acid (IBA). MS medium with 1.5 mg/l 6-benzylaminopurine plus 0.15 mg/l IBA produced the highest shoot induction frequency with an average of 6.26 and 10.13 shoots per leaf and petiole explants, respectively. After 4 weeks, the highest root formation frequency (96.7%), root number (5.73), and root length (4.76 cm) were with MS medium containing 2.0 mg/l IBA plus 0.1 mg/l α-naphthalene acetic acid. In addition, the effect of four sodium nitroprusside (SNP) treatments on acclimatization was also studied. Highest morphological traits such as survival rates, fresh and dry root weights as well as antioxidant enzymatic activities such as superoxide dismutase, peroxidase, and catalase was achieved with 125 ppm SNP. The α-amino acid, proline, content was highest with this treatment while the highest H2O2 (hydrogen peroxide) was in the controls. This study introduces a cost-effective, prolific, and efficient in vitro multiplication system to supply pharmaceutical and ornamental needs. It is the first report of an in vitro organogenesis protocol for F. religiosa by direct regeneration through axenic seedling-derived petiole and leaf explants, which can be efficiently employed for the utilization of active biomolecules.     

The Healing Potential of Plantago lanceolata Ointment on Collagenase-Induced Tendinitis in Burros (Equus asinus)

This study was carried out to evaluate the healing potential of water-soluble extract of Plantago lanceolata as a topical ointment on experimental tendinitis in burros. Tendinitis was induced by injection of 2,500 U of bacterial collagenase in the superficial digital flexor tendon of both forelimbs of six male burros. Tendinitis was confirmed ultrasonographically. 48 hours after collagenase injection, two grams of 10% P lanceolata ointment was applied on one limb (treatment group) and the same amount of eucerin (the vehicle of the ointment) on the other limb (control group), every other day for 6 weeks. Ultrasonographic examination of the tendon was performed weekly during the study and mean cross-sectional area of the superficial digital flexor tendon was measured, which was found to increase significantly after injection of collagenase in both groups. From the third week, it decreased significantly in the treatment group in comparison with the control group. At the end of the study, the animals were euthanized for histopathological study of the tendons. In control group, degenerative changes in tendon could be seen, whereas significant degree of healing was observed in the treatment group. It can thus be concluded that the P lanceolata ointment was effective in promoting the healing process of the tendon.     

Simulation of drainage water quality with DRAINMOD

The design and management of drainage systems should consider impacts on drainage water quality and receiving streams, as well as on agricultural productivity. Two simulation models that are being developed to predict these impacts are briefly described. DRAINMOD-N uses hydrologic predictions by DRAINMOD, including daily soil water fluxes, in numerical solutions to the advective-dispersive-reactive (ADR) equation to describe movement and fate of NO₃-N in shallow water table soils. DRAINMOD- CREAMS links DRAINMOD hydrology with submodels in CREAMS to predict effects of drainage treatment and controlled drainage losses of sediment and agricultural chemicals via surface runoff. The models were applied to analyze effects of drainage intensity on a Portsmouth sandy loam in eastern North Carolina. Depending on surface depressional storage, agricultural production objectives could be satisfied with drain spacings of 40 m or less. Predicted effects of drainage design and management on NO₃-N losses were substantial. Increasing drain spacing from 20 m to 40 m reduced predicted NO₃-N losses by over 45% for both good and poor surface drainage. Controlled drainage further decreases NO₃-N losses. For example, predicted average annual NO₃-N losses for a 30 m spacing were reduced 50% by controlled drainage. Splitting the application of nitrogen fertilizer, so that 100 kg/ha is applied at planting and 50 kg/ha is applied 37 days later, reduced average predicted NO₃-N losses but by only 5 to 6%. This practice was more effective in years when heavy rainfall occurred directly after planting. In contrast to effects on NO₃-N losses, reducing drainage intensity by increasing drain spacing or use of controlled drainage increased predicted losses of sediment and phosphorus (P). These losses were small for relatively flat conditions (0.2% slope), but may be large for even moderate slopes. For example, predicted sediment losses for a 2% slope exceeded 8000 kg/ha for a poorly drained condition (drain spacing of 100 m), but were reduced to 2100 kg/ha for a 20 m spacing. Agricultural production and water quality goals are sometimes in conflict. Our results indicate that simulation modeling can be used to examine the benefits of alternative designs and management strategies, from both production and environmental points-of-view. The utility of this methodology places additional emphasis on the need for field experiments to test the validity of the models over a range of soil, site and climatological conditions.     

Pollution and Ecological Risk Assessment of Heavy Metals in Farmland Soils in Yanqi County,Xinjiang, Northwest China

A total of 50 farmland soil samples were collected from the Yanqi County, Xinjiang, China, and the concentrations of eight heavy metal elements (As, Cd, Cr, Cu, Mn, Ni, Pb and Zn) were determined by standard methods. The spatial distribution, pollution level and ecological risk status of heavy metals were analyzed based on GIS technology, the Geo-accumulation Index (Igeo), the Pollution Load Index (PLI) and the Potential Ecological Risk Index (RI). Results indicated that: (1) The average contents of Cd, Cr, Ni, Pb, and Zn of farmland soils exceeded the background values of irrigation soils in Xinjiang by 1.5, 1.40, 1.33, 2.63, and 4.92 times, respectively. Cd showed a no-pollution level, Zn showed a partially moderate pollution level, Pb showed a slight pollution level, and Cr, Cu, As, Mn, and Ni showed no-pollution level, compared to the classification standard. The PLI values of heavy metal elements of farmland soils varied from 0.83 to 1.89, with an average value of 1.29, at the moderate pollution level. (2) The Individual Potential Ecological Risk Index for heavy metals in the study area was ranked in the order of: As > Ni > Cu > Cd > Pb > Cr> Zn. The RI values of heavy metals of farmland soils varied from 3.45 to 11.34, with an average value of 6.13, at the low ecological risk level. (3) Cu and Mn of farmland soils were mainly originated from the soil parent material and topography of the study area. As, Cd, Ni and Pb were mainly originated from human activities, and Cr and Zn may originated from both natural and anthropogenic factors in the study area.     

Effect of Cinnamon (Cinnamomum zeylanicum) on Growth Performance,Feed Utilization,Whole-Body Composition,and Resistance to Aeromonas hydrophila in Nile Tilapia

Four isonitrogenous (30% crude protein) and isocaloric (4.40 kcal/g) experimental diets were formulated to contain 0.0% (control), 0.5%, 1.0%, or 1.5% cinnamon. The diet containing 1% cinnamon resulted in significantly greater (P < 0.05) specific growth rate (SGR), feed conversion ratio (FCR), feed efficiency ratio (FER), protein efficiency ratio (PER), apparent protein utilization (APU), and energy utilization (EU). In regard to body composition, there was no significant difference in dry matter, protein, lipids, and ash (P > 0.05) contents due to cinnamon supplementation. Blood plasma profile showed an improvement in hemoglobin (HB), red blood cell (RBCS), hematocrite (PCV), total protein, and total lipids, while there was a decrease in creatinin, urea, aspartate aminotransferase (AST), alanine aminotransferase (ALT), and glucose in fish fed 1% cinnamon. Cinnamon was found to have an antibacterial activity antagonistic to Aeromonas hydrophila infection in fish. Performance and FCR improvement translated into a 10% decrease in feed costs associated with the 1% cinnamon diet.     

Low potassium diets with different levels of calcium in comparison with different anionic diets fed to prepartum dairy cows: Effects on sorting behaviour,total tract digestibility,energy metabolism,oxidative status and hormonal response

This study investigated the effects of low potassium diets with different levels of Ca compared to two diets low in dietary cation–anion difference (DCAD) fed prepartum as a strategy to prevent hypocalcemia on sorting behaviour, total tract digestibility, oxidative status and energy and protein metabolism of transition cows. Forty-eight pregnant dairy cows were assigned to 4 treatment groups: Low Ca, low K (LCLK), High Ca, low K (HCLK), Supplementation with anionic mineral mixture (AMS) supplementation with SoyChlor (CAS). After parturition, all animals were fed a standard postpartum diet. Data were collected until 21 DIM. Prepartum urinary pH was significantly reduced by the low DCAD diets, while postpartum Ca homeostasis was affected by the HCLK ration. Feeding AMS induced sorting against particles <1.18 mm in favour of particles >19 mm prepartum. In contrast, cows fed CAS showed an increase in selective consumption of fine particles and sorted against longer particles similar to the HCLK and LCLK groups. Postpartum sorting activity was not affected by the dietary treatments. After calving, apparent digestibility of NDF was significantly reduced in the HCLK group. Prepartum, we observed effects on serum concentrations of non-esterified fatty acids were higher and insulin sensitivity was lower in the AMS group. Blood urea nitrogen (BUN) was decreased in cows fed the CAS ration. Postpartum, we found serum protein to be decreased with the low DCAD diets while BUN was decreased in the CAS group. The low DCAD rations increased prepartum serum malondialdehyde concentrations, while postpartum total antioxidant capacity was lower in the HCLK and the AMS group. From these data, we conclude that AMS decreased prepartum intake due to compromised palatability. Intermediate protein metabolism was affected by the low DCAD diets, while parameters of oxidative stress were probably affected by acid–base balance and Ca homeostasis.     

Effects of tree species diversity on leaf litter decomposition process in semi-arid Mediterranean oak forests

European Journal of Forest Research - Many studies have been conducted on the effects of changes in plant diversity and species composition on ecosystem functioning and plant productivity due to...     

Retracted: Study of testis histology and sperm morphology in the Bunnei,Barbus sharpeyi (Gunther, 1874) induced by luteinizing hormone‐releasing hormone analogue and carp pituitary extract

This study was conducted to determine the effects of hormone treatment on testis structure in Barbus sharpeyi, as well as the morphology of sperm examined by scanning electronic microscopy (SEM). Male B. sharpeyi were divided into three groups (three fish per group) and injected with luteinizing hormone – releasing hormone analogue (LHRH–A₂) or carp pituitary extract (CPE). The first and second groups were treated with 10 μg kg^?1 LHRH–A₂ and metoclopramide (MET), and their testis were sampled pre‐ and Poststripping respectively. The third group received 2 mg kg^?1 CPE and were killed pre‐stripping. Based on the histological results obtained, the testicular connective tissue of the lumen was thicker, and seminal vesicles were of a lower volume, in fish injected with CPE in comparison to the other groups. After treatment with LHRH–A₂ and MET, not all spermatozoa within the testis were ejaculated, and only a small amount of sperm was obtained by abdominal stripping. The highest and lowest diameters of connective tissue within lobules were observed in fish receiving CPE and LHRH–A₂ treatments respectively. There was a significant difference (P < 0.05) in lobule space between the fish injected with the CPE and the fish injected with the LHRH–A₂ and MET. The SEM results revealed that the spermatozoa of B. sharpeyi were composed of a spherical to elliptical head, a cylindrical midpiece, and a lengthy flagellum. In conclusion, it was found that injection with LHRH–A₂ and MET improved the spermatogenic process in comparison to injection with CPE.