Tradeoffs between hydraulic and mechanical stress responses of mature Norway spruce trunk wood

We tested the effects of growth characteristics and basic density on hydraulic and mechanical properties of mature Norway spruce (Picea abies (L.) Karst.) wood from six 24-year-old clones, grown on two sites in southern Sweden differing in water availability. Hydraulic parameters assessed were specific hydraulic conductivity at full saturation (ks100) and vulnerability to cavitation (Psi50), mechanical parameters included bending strength (sigma b), modulus of elasticity (MOE), compression strength (sigma a) and Young's modulus (E). Basic density, diameter at breast height, tree height, and hydraulic and mechanical parameters varied considerably among clones. Clonal means of hydraulic and mechanical properties were strongly related to basic density and to growth parameters across sites, especially to diameter at breast height. Compared with stem wood of slower growing clones, stem wood of rapidly growing clones had significantly lower basic density, lower sigma b, MOE, sigma a and E, was more vulnerable to cavitation, but had higher ks100. Basic density was negatively correlated to Psi50 and ks100. We therefore found a tradeoff between Psi50 and ks100. Clones with high basic density had significantly lower hydraulic vulnerability, but also lower hydraulic conductivity at full saturation and thus less rapid growth than clones with low basic density. This tradeoff involved a negative relationship between Psi50 and sigma b as well as MOE, and between ks100 and sigma b, MOE and sigma a. Basic density and Psi50 showed no site-specific differences, but tree height, diameter at breast height, ks100 and mechanical strength and stiffness were significantly lower at the drier site. Basic density had no influence on the site-dependent differences in hydraulic and mechanical properties, but was strongly negatively related to diameter at breast height. Selecting for growth may thus lead not only to a reduction in mechanical strength and stiffness but also to a reduction in hydraulic safety.     

Location of New Firms: Influence of Commuting Behaviour

In the entrepreneurship literature, it is generally assumed that an individual establishes a new firm in a location in which they have strong ties, normally in the municipality of residence or employment. We scrutinise this general assumption and show that firm location depends on individual characteristics, such as the commuting experience. Our results show that commuting influences the firm location choice. The probability of establishing a firm in the work municipality increases if the entrepreneur is a commuter, holding constant the type of region and unobservable and observable individual features.     

Rapid advance of spring arrival dates in long-distance migratory birds

Several bird species have advanced the timing of their spring migration in response to recent climate change. European short-distance migrants, wintering in temperate areas, have been assumed to be more affected by change in the European climate than long-distance migrants wintering in the tropics. However, we show that long-distance migrants have advanced their spring arrival in Scandinavia more than short-distance migrants. By analyzing a long-term data set from southern Italy, we show that long-distance migrants also pass through the Mediterranean region earlier. We argue that this may reflect a climate-driven evolutionary change in the timing of spring migration.     

Electrical stimulation affects metabolic enzyme phosphorylation, protease activation, and meat tenderization in beef

ABSTRACT: The objective of this study was to investigate the response of sarcoplasmic proteins in bovine LM to low-voltage electrical stimulation (ES; 80 V, 35 s) after dressing and its contribution to meat tenderization at an early postmortem time. Proteome analysis showed that ES resulted in decreased (P < 0.05) phosphorylation of creatine kinase M chain, fructose bisphosphate aldolase C-A, β-enolase, and pyruvate kinase at 3 h postmortem. Zymography indicated an earlier (P < 0.05) activation of μ-calpain in ES muscles. Free lysosomal cathepsin B and L activity increased faster (P < 0.05) in ES muscles up to 24 h. Immunohistochemistry and transmission electron microscopy further indicated that lysosomal enzymes were released at an early postmortem time. Electrical stimulation also induced ultrastructural disruption of sarcomeres. In addition, ES accelerated (P < 0.05) the depletion of ATP, creatine phosphate, and glycogen, as well as a pH decline and the more preferred pH/temperature decline mode. Finally, ES accelerated meat tenderization, resulting in lesser (P < 0.05) shear force values than the control over the testing time. A possible relationship was suggested between a change in the phosphorylation of energy metabolic enzymes and the postmortem tenderization of beef. Our results suggested the possible importance of the activation of μ-calpain, phosphorylation of sarcoplasmic proteins, and release of lysosomal enzymes for ES-induced tenderization of beef muscle.     

Ozone and drought stress — Interactive effects on the growth and physiology of Norway spruce (Picea abies (L.) Karst.)

Young trees of Norway spruce (Picea abies (L.) Karst.) were grown in 120 litre pots under two different ozone levels in open-top chambers for three seasons, 1992–1994. The ozone treatments were charcoal filtered air (CF, average 24 h seasonal mean 6.5 ppb) and non-filtered air with extra ozone aiming to track 1.5 times ambient (NF+, average seasonal mean 34 ppb). In addition, half of the spruce trees in Aug – Sep each season recieved a drought period of between five and seven weeks. The remaining half were kept well-watered. The soil water content, the needle water potentials, and the gas exchange as well as the chamber micro climate were measured before, during and after the drought period. Furthermore, the growth of the trees was measured as biomass increase. During the 1993 drought period, where the trees experienced a moderate drought stress, the trees grown in NF+ consumed soil water faster and showed a higher needle conductance compared to CF. However, no negative effects were found on needle water potential or growth. During the more severe 1994 drought stress period we did not find any differences between the two ozone treatments in soil water consumption, needle conductance or needle water potential. There was a significant negative effect of the high ozone treatment on tree biomass of the well-watered trees. Total plant biomass was reduced 18 % and stem biomass was reduced as much as 28 %. The negative effect of ozone on tree biomass was much smaller for the droughted trees.     

Degradation of hemicellulose, cellulose and lignin in decomposing spruce needle litter in relation to N

Decomposing needles from a Norway spruce forest in southern Sweden were studied for 559 days under laboratory conditions. Falling needles were collected in control (Co) plots and plots that had received 100 kg N ha⁻¹ yr⁻¹ as (NH₄)₂SO₄ for 9 years under field conditions. One of the aims was to determine whether the previously documented low decomposition rate of the N fertilized (NS) needles could be explained by a lower degradation degree of lignin. The lignin content was studied using the alkaline CuO oxidation method, the Klason lignin method and CPMAS ¹³C NMR spectroscopy. The amounts of cellulose and hemicellulose were also determined.The fertilized needle litters initially decomposed faster than the unfertilized, but later this reaction reversed, so that at the end the mass loss was 45% initial C in the control and 35% initial C in NS. Klason lignin decreased with time in both treatments and overall, the change of Klason lignin mirrored the litter mass loss. No major difference as regards the decomposition of hemicellulose occurred between the treatments, whereas significantly lower concentrations of cellulose were found in NS needles throughout the incubation. The CuO derived compounds (VSC) were somewhat lower in NS needles throughout the decomposition time. Initially, VSC increased slightly in both treatments, which contradicts the Klason lignin data. There was a weak positive relationship (p>0.05) between VSC and Klason lignin. Both vanillyls compounds (V) and cinnamyl compounds (Ci) increased slightly during decomposition, whereas syringyl compounds (S) vanished entirely. The lignin degradation degree, i.e. the acid-to-aldehyde ratio of the vanillyl compounds expressed as (Ac/Al)_v, showed no significant effect of treatment. The ¹³C NMR analyses of the combined samples showed increased content of aromatic C with increasing decomposition time. The carbohydrate content (O-alkyl C) was lower in the fertilized needle litter throughout the incubation time. The alkyl C content tended to increase with decomposition time and N fertilization. The alkyl C/O-alkyl C ratios increased in both treatments during the incubation. The NMR results were not tested statistically.In conclusion, no major difference concerning lignin degradation could be found between the unfertilized and N fertilized needle litter. Thus, the study contradicts the hypothesis that higher amounts of N reduce lignin degradation. The reduced biological activity is probably due to direct N effects on the microorganisms and their decomposing ability.     

Investigations of factors that influence the acrylamide content of heated foodstuffs

The acrylamide content of heated foodstuffs should be considered to be the net result of complex reactions leading to the formation and elimination/degradation of this compound. The present study, involving primarily homogenized potato heated in an oven, was designed to characterize parameters that influence these reactions, including the heating temperature, duration of heating, pH, and concentrations of various components. Higher temperature (200 degrees C) combined with prolonged heating times produced reduced levels of acrylamide, due to elimination/degradation processes. At certain concentrations the presence of asparagine or monosaccharides (in particular, fructose and also glucose and glyceraldehyde) was found to increase the net content of acrylamide. Addition of other free amino acids or a protein-rich food component strongly reduced the acrylamide content, probably by promoting competing reactions and/or covalently binding acrylamide formed. The dependence on pH of the acrylamide content exhibited a maximum around pH 8; in particular, lower pH was shown to enhance elimination and decelerate formation of acrylamide. In contrast, the effects of additions of antioxidants or peroxides on acrylamide content were small or nonexistent.     

Factors influencing visible ozone injury on potato including the interaction with carbon dioxide

Weekly observations and scoring of ozone injury were done on all experimental sites where continuous monitoring of ozone in ambient air was available. Typical acute symptoms were reddish-brown lesions and bronzing, primarily on the upper surface of the leaves. The potato cultivar Bintje, cultivated at all sites, appeared to be sensitive to ozone but less than clover species, which served as model for the short-term critical level (AOT40/5 d). At the mid-European and Nordic latitudes injury appeared after an AOT40/5 d exposure of about 700 and 275 nl l⁻¹ h, respectively. In central Europe the plants were indeed less sensitive than in Scandinavia and the AOT40/5 d values were higher than the proposed critical level of 500 nl l⁻¹ h at a vapour pressure deficit (VPD) exceeding 1.5 kPa and 200 nl l⁻¹ h at a VPD below 1.5 kPa. In addition injury appeared primarily after the stage of maximum leaf area (MLA). In the Nordic countries injury was noticed at very low AOT40/5 d values and occurred before as well as after the stage of MLA. Using artificial neural network models it appeared from the data set that VPD did not play a major role in the ozone sensitivity of potato, but there were indications that daylength was an important parameter in addition to a possible higher uptake at high latitudes. Increasing the CO₂ concentration did not prevent the potato plants from visible ozone damage but it reduced the intensity by 10%. Taking only the OTC experiments of the mid-latitudes into account, there was a correlation between the ozone injury scoring just before harvest and the marketable yield loss. However, in all the cases considered, ozone damage appeared only after the stage of MLA and increased steadily towards harvest. The correlation can be explained by a parallel development of injury and chlorosis (senescence) typical for chronic exposure. There was no relationship between isolated short-term exposures causing acute injury and final yield.     

Mycelial growth and exclusion of Heterobasidion parviporum inoculated in branches of 15‐year‐old Picea abies clones

Twigs of 22 clones of 15‐year‐old Picea abies grafts were inoculated with Heterobasidion parviporum in July and in September 2003. Fungal growth varied between clones and exclusion of the pathogen varied significantly among clones inoculated in July. The results indicate that twigs exhibit the same infection pattern as cuttings when inoculated with H. parviporum and that exclusion of the pathogen in twigs is a clone‐dependent character that occurs during the vegetation period.     

Initial seedling emergence of hairy birch and silver birch on abandoned fields following different site preparation regimes

Experiments were carried out at four sites in Sweden to investigate the possibility of establishing hairy birch (Betula pubescens Ehrh.) and silver birch (Betula pendula Roth) on abandoned fields using natural regeneration and (or) direct seeding. The effects of six soil preparation methods (no preparation, ordinary ploughing, rotary cultivation, deep ploughing, inverted ground, removal of top-soil) and five additional treatments (no treatment, herbicide, peat litter, wood-ashes, slaked lime) on seedling emergence percentages (SEP) and vegetation cover percentages (VCP) were studied. SEP-values were estimated in June (SEP(J)) and October (SEP(O)). The experimental designs used were: 1) split-plot design with whole plots in a randomized complete block design (RCBD); 2) RCBD. The SEP-values observed with no preparation were close to 0% while the SEP-values obtained with mechanical soil preparation methods mostly were much higher (p0.014). Seedbeds with top-soil in the surface, created by ordinary ploughing or rotary cultivation, and seedbeds with mainly bare mineral soil in the surface, created by deep ploughing, inverted ground or removal of top-soil, obtained SEP-values of equal merit on silty soils, reaching SEP(O)-values up to 15%. The latter seedbeds obtained the best results on sandy soil, with as high SEP(O)-values as 47% after removal of top-soil. Seedbeds with top-soil in the surface were quickly colonized by ground vegetation, reaching VCP-values between 70% and 100%. Herbicide spraying with glyphosate and application of peat litter to the seedbed surface promoted seedling emergence. However, herbicide spraying before soil preparation was of little effect when followed by mechanical soil preparation.