Relationship between viscosity and molecular weight in an andosol humic acid

Viscosity and molecular weight of particle size fractions obtained from an Andosol humic acid (HA) were determined. Viscosity was determined both in solutions with and without the addition of 0.1 M NaCl (Cs 0.1 and Cs 0, respectively) at pH 7.0. Polyelectrolytic character was observed in the particle size fractions based on the changes in the concentration dependence of reduced viscosity with NaCI concentrations. The use of a Cs 0.1 solution was suitable for the determination of the values of intrinsic viscosity ([η]) of the particle size fractions. The [η] value increased with increasing weight average molecular weight ( M _w) determined by gel permeation chromatography (GPC), and ranged from 4.3 to 12.9 X 10-3 (L g^-1) in the Cs 0 solution and from 3.5 to 6.6 × 10^-3 (L g^-1) in the Cs 0.1 solution. A linear relationship between [η] in the Cs 0.1 solution and M _w on a logarithmic scale, which was similar to the MarkHouwink equation, was observed. The value of the constant a calculated from the relationship, which reflected the polymer morphology, was 0.75 in the Cs 0.1 solution, and it corresponded to a polymer with flexible chains.     

Assessment of the decay risk of airborne wood-decay fungi III: decay risks at different sampling sites

The decay risk of airborne wood-decay fungi in the same volume of air was investigated by using an air sampler over the course of a year at three different sampling sites. Japanese cedar disks measuring 7.8 cm in diameter and about 3 mm in thickness, and with a moisture content of about 100 % were placed in a “BIOSAMP” air sampler and then exposed to 1000 l of air in the northern, central, and southwest parts of Japan. The exposed disks were incubated for 20 weeks in a damp container maintained at 26 ± 2 °C and degraded by fungi trapped on the disks. The decay risk was calculated from the mass loss during incubation, and the factors affecting the said risk were explored. The results showed that sampling sites apparently do not affect decay risk, even though the Scheffer’s climate indexes of the sites were quite different. The relation between the sampling month and decay risk reveals that decay risk remains virtually the same year-round. Relative humidity on a sampling day is one of the key factors affecting decay risk in sampling conducted at the central or southwest site. In contrast, no weather factors influenced decay risk at the northern sampling site.     

Vertical soil–air CO2 dynamics at the Takayama deciduous broadleaved forest AsiaFlux site

At the Takayama deciduous broadleaved forest Asiaflux site in Japan, the ecosystem carbon dynamics have been studied for more than two decades. In 2005, we installed non-dispersive infrared CO₂ sensors in the soil below the site’s flux tower to systematically study vertical soil–air CO₂ dynamics and explain the behavior of soil surface CO₂ efflux. Soil–air CO₂ concentrations measured from June 2005 through May 2006 showed sinusoidal variation, with maxima in July and minima in winter, similar to the soil CO₂ effluxes measured simultaneously using open-flow chambers. Soil–air CO₂ concentrations increased with soil depth from 5 to 50 cm: from 2,000 to 8,000 ppm in the summer and from 2,000 to 3,000 ppm in the winter under snow. Summer soil–air CO₂ concentrations were positively correlated with soil moisture on daily and weekly scales, indicating that the Oi, Oe, and A horizons, where decomposition is accelerated by high-moisture conditions, contributed substantially to CO₂ emissions. This result is consistent with the short residence time (about 2 h) of CO₂ in the soil and larger emissions in shallow soil layers based on our diffusion model. We revealed for the first time that soil–air CO₂ concentrations in winter were correlated with both snow depth and wind speed. CO₂ transfer through the snow was hundreds of times the gas diffusion rates in the soil. Our estimate of the CO₂ efflux during the snow-cover season was larger than previous estimates at TKY, and confirmed the important contribution of the snow-cover season to the site’s carbon dynamics.     

Bending creep behavior of hot-pressed wood under cyclic moisture change conditions

This study examined the bending creep behavior of hot-pressed wood during cyclic moisture changes. Sugi (Cryptomerica japonica D. Don) specimens were pressed in the radial direction under six combinations of nominal compressive strain (33% and 50%) and press temperatures (140°C, 170°C, 200°C). Creep tests were conducted at 20°C with three cyclic relative humidity changes between 65% and 95% under 25% of short-breaking stress. The effect of moisture content (MC) change on elastic compliance and mechanosorptive (MS) compliance was investigated. The relation between MS compliance and thickness swelling was studied. The results indicated that total compliance increased over the history of cyclic moisture changes; and its behavior was closely related to the changes in MC and thickness swelling. The total compliance increased during adsorption and decreased during desorption. Elastic compliance increased linearly with MC and was dependent on press temperature and compression. With increasing MC change, MS compliance increased during adsorption and decreased during desorption. The first adsorption led to greater MS compliance than did the subsequent adsorption with the same amount of MC change. In general, the elastic parameterK _E and the MS parameterK _Mincreased with compression and decreased as the press temperature increased. The MS parameterK _M was apparently greater than the elastic parameterK _E. The MS parameterK _M increased with swelling coefficient K_SW of the hot-pressed specimen during adsorption and decreased with an increasing shrinkage coefficientK _SH during desorption.     

Sulfuric acid bleaching of kraft pulp III: reactivity of kraft pulping-resistant structures under acidic conditions

To investigate the bleaching mechanism, a lignincarbohydrate complex (LCC) model compound, a vinyl ether-type lignin model dimer, and a hexeneuronic acid model compound were treated with dilute sulfuric acid of different pHs. Beech kraft pulp and red pine kraft pulp were also treated with dilute sulfuric acid and then extracted with aqueous alkali. The amount of hexeneuronic acid degradation products in acid effluents and lignin dissolved in alkali effluents were determined. It was found that the benzyl ether-type LCC bond and the vinyl ether bond in lignin were effectively cleaved under the pH where sulfuric acid bleaching of kraft pulp was effective. Hexeneuronic acid group was also effectively degraded during sulfuric acid bleaching. In beech kraft pulp bleaching, both lignin removal and hexeneuronic acid removal contributed to the kappa number reduction. In red pine bleaching, the contribution of hexeneuronic acid removal was negligible, and most of the kappa number reduction was achieved by the lignin removal.Part of this report was presented at the 9th International Symposium on Wood and Pulping Chemistry, Montreal, July 1997     

Levels of Avenanthramides and Activity of Hydroxycinnamoyl‐CoA:Hydroxyanthranilate N‐Hydroxycinnamoyl Transferase (HHT) in Steeped or Germinated Oat Samples

Concentrations of avenanthramides and activity of the biosynthetic enzyme hydroxycinnamoyl‐Co A:hydroxyanthranilate N‐hydroxycinnamoyl transferase (HHT) were analyzed in dry or, steeped nonmilled or milled, non‐heat‐treated (raw) or heat‐treated oat samples (Avena sativa L.). Increased avenanthramide concentrations were found when intact raw groats were steeped. The increase was time‐ and temperaturedependent and maximal after 10 hr of steeping at 20°C. Continuous germination in air, after steeping, only contributed to a further increase in avenanthramides when steeping times were shorter than 10 hr. Concentrations of avenanthramides and HHT activity were positively correlated during steeping of intact groats at 8 and 20°C. The increase in avenanthramides was suggested to be due to de novo synthesis and a whole grain structure seemed to be required as no increase was found when groats were milled before steeping. Avenanthramide levels also increased when heat‐treated samples, lacking HHT activity, were steeped. This increase may be due to release of bound forms, possibly formed during the preceding heat treatment.     

Functional analysis of the 3′ end of avrBs3/pthA genes from two Xanthomonas species

The phytopathogens Xanthomonas oryzae pathovar (pv.) oryzae and Xanthomonas axonopodis pv. citri each contain several avrBs3/pthA family genes. Structural features of these genes important for avirulence and/or virulence functions include a central region of multiple direct repeats and three nuclear localization signals (NLSs) and an acidic activation domain (AAD) at the 3′ end. To identify other regions critical to function in the 3′ ends of these genes, we constructed several chimeras using apl1 and apl2 from X. axonopodis pv. citri and avrXa10 and avrXa7 from X. oryzae pv. oryzae and evaluated their functions by inoculation to citrus and rice. The apl1 and avrXa7 genes are major virulence determinants in citrus and rice, respectively, while the contributions of apl2 and avrXa10 to virulence are negligible or not measurable. Constructs that contained a 417 bp HincII-SphI fragment from the 3′ end of apl1 in combination with the repeats from avrXa7, avrXa10, and apl1 caused a canker phenotype on citrus. Interchange of the HincII-SphI fragment between avrXa7 and avrXa10 abolishes avrXa7 avirulence function and reduces its virulence but it does not affect avrXa10 avirulence function in rice. avrXa7 caused a hypersensitive response (HR) in citrus and replacement of it's 3′ end with that of apl1 resulted in loss of canker and induction of HR. Thus, the HincII-SphI fragment of the avrBs3/pthA gene family is important for avirulence and virulence functions in two different plant species, Oryza sativa and Citrus natsudaidai HAYATA.