Behavioural analysis of a nonionic detergent in the kraft pulp washing process using cryo-time-of-flight secondary ion mass spectrometry and cryo-scanning electron microscopy

In order to understand the kraft pulp decolouring mechanism on using a nonionic detergent, the pulp washing process and the resulting pulp handsheets were investigated by examining the brightness, kappa number, thioacidolysis product yield, and dewatering efficiency in the pressing sheet making process. The pulp decolouring could be attributed to a decrease in the lignin content and an improvement in the dewatering efficiency. Furthermore, the detergent distribution in the aqueous pulp suspension obtained during the pulp washing process was visualised using cryo-time-of-flight secondary ion mass spectrometry/scanning electron microscopy (cryo-TOF-SIMS/SEM). The detergent was clearly observed at the transverse surface of the pulp fibre cell wall and was also detected in the lumen of the fibres, suggesting the permeation of the detergent into the pulp fibre cell wall. Based on these results, the pulp decolouring mechanism can be proposed as follows: the detergent permeates into the pulp fibre cell wall and promotes the solution-exchange between the inside and the outside parts of the fibre cell wall, finally washing away the chromophoric substances such as lignin and its degradation products owing to the enhanced dewatering efficiency.     

Effect of board density on bending properties and dimensional stabilities of MDF-reinforced corrugated particleboard

We investigated the bending properties of composite boards produced by reinforcing both sides of corrugated particleboard with medium-density fiberboard (MDF). Thickness swelling and linear expansion (LE) were measured to assess the dimensional stabilities of the composite board. Although the apparent density of the composite board was 0.48g/cm³, its strength was found to be equivalent to that of 18-type particleboard as described in JIS A 5908. The boards parallel/perpendicular anisotropy in strength was 0.9. The modulus of rupture (MOR) of the composite board increased with board density only up to a certain density, beyond which the MOR was constant. On the other hand, the thickness swelling of both corrugated particleboard and the composite board was smaller than that of flat-type particleboard, satisfying the JIS A 5908 standard of 12%. Linear expansion (soaking in water of ordinary temperature for 24h) of corrugated particleboard was 0.7%–0.9% in the parallel direction and 2.1%–3.1% in the perpendicular direction; hence, anisotropy in linear expansion existed in the corrugated particleboard. The linear expansion of the composite board was 0.6%–0.9% in the parallel direction and 1.8%–2.5% in the perpendicular direction. Although the LE of the composite board was lower than that of corrugated particleboard, it is necessary to improve the LE of composite board for practical use.     

Economics and Employment Generation of Bamboo-Based Enterprises: A Case Study from Eastern Bangladesh

An exploratory survey was carried out to assess economics and employment generation of the trade of bamboo and bamboo-based secondary products in the eastern Bangladesh, to obtain reliable information about their status, socio-economic significance, production and marketing. The study was undertaken over 30 bamboo-based enterprises in a suburban market of eastern Bangladesh, to investigate regional product details, economic profitability and employment opportunities. The sample entrepreneurs, corresponding to about 25% of the bamboo enterprise population were interviewed using a semi-structured questionnaire. About 202 full and part-time workers were employed in the factories, under categories of artisan (who manufactured secondary products). The average number of worker’s in the large, medium and small factories were 9 (artisan 40%), 6.45 (artisan 35%) and 5 (artisan 25%) respectively. The study revealed that there was always a satisfied demand of skilled artisans. Most of the workers were relatively newly employed (not more than 5 years). The daily wage rate varied between 70 and 130 Tk. ($US 1 equals approximately 70 Bangladeshi Taka (Tk.), as at December 2008). Bambusa balcooa was the most utilized species (39.96%) in terms of monetary value. The price of a single B. balcooa culm in the local market was Tk. 160–210. Nine sizes of articles under seven bamboo categories were identified, these being bera (36″ × 120″ and 72″ × 96″), bookshelf (36″ × 24″), chaluni (12″ × 12″), chatai (48″ × 60″ and 36″ × 48″), jhuri, rickshaw hood and tukri. Net average profit per article was the highest for rickshaw hoods (Tk. 400 at the retailer stage). The total expected annual income for an enterprises from all articles types sold was estimated to be Tk. 85,800. Three distinct marketing channels were identified for selling bamboo and value-added secondary products. The study also generated policy implications for effective management of bamboo-based enterprises.     

Towards exploration of plant-based ethno-medicinal knowledge of rural community: basis for biodiversity conservation in Bangladesh

Because lack of data impedes the assessment of the conservation of medicinal plants, ethno-medicinal studies are important to fill this gap. This study considered the traditional use of plants for health care by the rural communities in two forested and non-forested regions of Bangladesh. A total of 230 respondents were interviewed accompanied by field observation and voucher specimen collection. Altogether, 68 species of medicinal plants belonging to 38 families distributing over 58 genera were recorded, of which 22 species were common in both regions. Trees were the most commonly utilized growth form and leaves were the most commonly used plant part. Forests and homesteads were the major sources of medicinal plants in forested and non-forested regions, respectively. High use versatility (Relative Importance >1) was represented by 14 species; Emblica officinale L. and Allium sativum L. were the most versatile species. Forty-one individual ailments were treated with the medicinal plants recorded. The ailment categories ‘respiratory problems’ and ‘sexual problems’ received the highest score from the calculation of informants’ consensus factor (F _ic) in forested and non-forested regions, respectively. The findings could contribute in the pharmaceutical sector by directing further investigation of bio-active compounds in medicinal plants. Secondly, results could inform the clues for conservation strategies of forest resources in that region.     

Suppression of Ralstonia solanacearum bacterial wilt disease by an organic hydroponic system

An organic hydroponic system that we developed has potential to control root diseases including bacterial wilt of hydroponically grown tomato. In inoculation tests with Ralstonia solanacearum during tomato plant cultivation in conventional inorganic hydroponics and in our organic system, many of the tomato seedlings in the conventional system wilted and died, but none of the seedlings in the organic hydroponics wilted or developed any symptoms, suggesting that the organic system can suppress this bacterial wilt disease. Interestingly, a rhizosphere biofilm, formed only on roots in the organic hydroponic system, may be responsible for the suppression of the bacterial wilt.     

Xenografting of bovine secondary follicles into ovariectomized female severe combined immunodeficient mice

Xenografting of ovarian tissue into immunodeficient mice has been used as a model to study the dynamics of follicular development and provides an alternative method for the production of mature oocytes. In a previous experiment, we demonstrated that xenografted bovine secondary follicles developed to the antral stage in severe combined immunodeficient (SCID) mice. In the present study, we examined the development of bovine secondary follicles (140-190 microm in diameter) grafted into ovariectomized mice in comparison with intact female mice as a control. At 4 weeks after grafting, several antral follicles ranging from 350 to 550 microm (457.6 +/- 50.8 microm) in diameter were found in the control mice, while a single large (larger than 2.5 mm) antral follicle and other small follicles were observed in every ovariectomized mouse. At 6 weeks after grafting, the mean diameter of morphologically normal follicles had further increased in the control group (591.8 +/- 132.0 microm). In ovariectomized mice, however, the mean diameter of follicles decreased (4 weeks: 864.2 +/- 988.2 microm; 6 weeks: 496.5 +/- 137.6 microm), since the single large antral follicle observed at 4 weeks had degenerated by 6 weeks. In control mice, more than 70% of follicles were morphologically normal and formed an antrum, and most of the follicles contained morphologically normal oocytes which grew to 122.5 +/- 2.2 microm. In ovariectomized mice, morphologically normal oocytes also grew larger than before grafting, but their survival rate was significantly lower than that in control mice. These results suggest that ovariectomy of host mice alters the developmental pattern of xenografted bovine secondary follicles to accelerate a single follicle to develop in the graft.     

Dietary intake of iodine‐enriched eggs decreases the incidence of mouse mammary tumors caused by the activated ErbB2 oncogene

Human epigenetic studies suggest that consumption of seaweed prevents mammary cancer, which possibly is explained by iodine daily intake. In this study, we evaluated the efficacy of dietary intake of iodine‐enriched eggs on mammary tumor incidence caused by the expression of activated type ErbB2. Female transgenic mice were divided into three groups, and fed a basic diet, a diet supplemented with ordinary eggs, or with iodine‐enriched eggs. The number of mammary tumors greater than 5 mm in diameter was recorded in mice at 6 months of age. We report that the average number of mammary tumors per mouse was significantly lower in the iodine‐enriched egg‐added diet group than in either the basic diet or ordinary egg diet groups. These results indicate that iodine intake through livestock‐derived products can reduce the incidence of mammary cancers caused by the expression of activated type ErbB2.     

Tomato metabolism and porphyrin-catalyzed oxidation of pyriproxyfen

Investigation of the metabolism of [(14)C]pyriproxyfen [4-phenoxyphenyl (R,S)-2-(2-pyridyloxy)propyl ether] in tomato fruits (Lycopersicon esculentum Mill. cv. Ponterosa) was conducted by topical application of acetonitrile solution or emulsifiable concentration formulation three times at 35, 21, and 7 days before harvest. Most of the radioactivity remained on the fruit surface or in the plant tissues as intact pyriproxyfen with minor metabolites formed via hydroxylation at the 4'-position of the phenoxy ring or cleavage of ether linkages. The biomimic chemical oxidation model using iron porphyrin as a catalyst and hydrogen peroxide was found to well reproduce the primary metabolites detected in the metabolism study. The electrophilic reaction indices obtained by AM1 molecular orbital calculations supposing involvement of cytochrome P-450 were successfully applied to evaluate the potentially higher reactive sites in pyriproxyfen.