Changes in microbial biomass and microbial activity of pig slurry after the transit through the gut of the earthworm Eudrilus eugeniae (Kinberg, 1867)

Here we studied the effects of gut transit through the earthworm Eudrilus eugeniae, on the physicochemical, biochemical, and microbial characteristics of pig slurry, by analyzing fresh casts. The reduction in the dissolved organic C contents in casts we recorded suggests that during digestion, earthworms assimilated labile organic C preferentially, which is a limiting growth factor for them. Furthermore, both microbial biomass and activity in pig slurry were significantly decreased by earthworm gut transit. It appears that E. eugeniae is able to digest microorganisms, although the addition of glucose to the food increased respiration, indicating that growth of microorganisms in casts could be limited by depletion of labile C. Despite reduced microbial biomass and activity, the metabolic diversity of microbial communities was greater in casts than in original pig slurry. Community level physiological profiles obtained from Biolog Ecoplate data revealed that, after earthworm gut transit, the microbial communities in casts and pig slurry were clearly differentiated by their physiological profiles. The results indicate that first stage in vermicomposting of pig slurry by E. eugeniae, i.e., casting, produced changes that will influence the dynamics of the organic matter degradation by reducing forms of N and C available to microorganisms, hence restricting their growth and multiplication. Nevertheless, the reduced microflora of casts was characterized by an increased catabolic potential that might lead to thorough degradation of pig slurry.     

Variation in concentrations of the fungicides tebuconazole and dichlofluanid following successive applications to greenhouse-grown lettuces

Residual levels and degradation rates of tebuconazole and dichlofluanid in lettuce plants grown in a greenhouse under agricultural conditions typical of northwestern Spain were studied. Lettuce plants were sprayed four times with a homogeneous 0.2% aqueous solution of Folicur Combi (wettable powder containing 40% dichlofluanid and 10% tebuconazole) at a rate of 2500 g/ha. Samples were collected 1, 5, and 9 days after the first two applications and at times ranging from 1 to 27 days after the last two applications. All samples were stored in a refrigerator at 4 degrees C. Fungicide levels were determined by solid-liquid extraction (SLE) followed by gas chromatography and mass spectrometry detection (GC-MSD). Recovery was good for tebuconazole (98%) but low for dichlofluanid (29%); precision was good (<10% for both analytes), and quantification limits were low (<1.5 mg/kg). Seven days after the last application, dichlofluanid levels were below the maximum allowed limit established in Spain (10 mg/kg), but tebuconazole levels were above the corresponding limit (5 mg/kg). Tebuconazole concentration dynamics was accurately fitted by zeroth- or combined first- and zeroth-order models (depending on variety), but modeling of the behavior of dichlofluanid was less satisfactory, probably due to its instability.     

Water quality,production parameters and nutritional condition of Litopenaeus vannamei (Boone, 1931) grown intensively in zero water exchange mesocosms with artificial substrates

The effect of artificial substrates on the water quality, production parameters and nutritional condition was assessed in experimental intensive cultures of Litopenaeus vannamei grown in mesocosm units with zero water exchange. The initial stocking densities in triplicate 1000 L tanks were 600 and 800 g of juvenile shrimp (2.7 g) per unit, with (W) and without (WO) artificial substrates. There were no significant differences between the water quality parameters of the four treatments. In the tanks with the lower stocking biomass, the best survival (96.7% vs. 87.0%), growth rate (1.69 vs. 1.35 g week⁻¹), final biomass (1969.6 vs. 1516.0 g m³) and feed conversion ratio (1.30 vs. 1.90) were obtained with artificial substrates. Similar results were observed for the higher stocking biomass (90.9% vs. 74.5%, 1.50 vs. 1.13 g week⁻¹, 2221.6 vs. 1560.8 g m³, and 1.50 vs. 2.60 respectively). The nutritional condition of shrimp was improved using artificial substrates. The protein content in muscle was higher (21.6% and 20.4%) in ponds with substrates as compared with the control (21.2% and 15.9%).     

Comparison of analytical methodologies based on 1h and 31p NMR spectroscopy with conventional methods of analysis for the determination of some olive oil constituents

The present study was designed to assess the agreement between analytical methodologies based on 1H and 31P NMR spectroscopy and conventional analytical methods (titration, gas chromatography, and high performance liquid chromatography) for measuring certain minor and major constituents (free acidity, fatty acids, iodine value, and phenolic compounds) of olive oil. The standard deviations of the NMR method were comparable to those of the conventional methods, except perhaps those of the total hydroxytyrosol and total tyrosol. Linear regression analyses showed strong correlations between NMR and conventional methods for free acidity, total hydroxytyrosol, total tyrosol, total diacylglycerols, (+)-pinoresinol, (+)-1-acetoxypinoresinol, and apigenin; good correlations for linoleic acid, free hydroxytyrosol, and free tyrosol; and weak correlations for oleic acid, linolenic acid, saturated fatty acids, and luteolin. Furthermore, a method comparison study was conducted and the agreement between NMR and conventional methods was evaluated by using the Bland and Altman statistical analysis. The distribution of the data points in the bias plot showed that 96.4% and 100% of the measurements of free acidity and iodine value, respectively, were within the limits of agreement of the two methods. For the remaining constituents of olive oil, the percentage of measurements, located within the limits of agreement, ranged from 94% to 98.5%.     

Treatment of an acid soil with bentonite used for wine fining: effects on soil properties and the growth of Lolium multiflorum

When used to fine wines, bentonite acquires a protein load that makes it a potentially useful fertilizer. Other properties of bentonite are also potentially useful for soil amendment. In the work described in this paper, waste bentonite from a winery was applied to an acid soil, and its effects on soil properties and on the growth of Lolium multiflorum were evaluated. Soil N, K, and P contents all increased, as did pH and cation exchange capacity. Biomass production increased as the dose of bentonite increased up to 5 g kg(-1), decreasing at larger doses (possibly as a result of falling potassium/magnesium ratio and increasing electrical conductivity). Environmental drawbacks of waste bentonite include its high soluble copper content, although its conversion in the soil to less soluble forms reduces its potential phytotoxicity. The copper, manganese, and zinc contents of the ryegrass crop were low.     

Solubility,partitioning, and activity of copper‐contaminated soils in a semiarid region

We studied the fate of Cu in contaminated semiarid soils from two areas with different mining activities in central Chile. Several regression models were evaluated to use soil physicochemical characteristics to predict solubility, partitioning, and activity of Cu. Furthermore, we hypothesize that the type of Cu mining compound (smelter dust versus tailing sand) can be another important variable determining the bioavailability of Cu. In the studied neutral to alkaline soils, soil organic matter (SOM) enhanced Cu solubility most probably through the formation of organic complexes with dissolved organic C (DOC). As a consequence, Cu solubility and partitioning were better explained by DOC concentration than by SOM content. On the other hand, Cu activity was mainly related to soil pH and was not affected by DOC. Although we found differences between the two study areas, Cu solubility and partitioning might not be as dependent upon the origin of the Cu mining compound as upon other physiochemical characteristics that influence the concentration and characteristics of DOC. Total Cu, pH, and DOC would be the most important variables to consider on Cu solubility, however, data about the nature of SOM may certainly improve the prediction models. Thus, multiple binding site models between Cu and DOC should be studied to improve predictions of Cu solubility.     

Influence on Polychlorinated Biphenyls Content Using Three Types of Biowastes As Fertilizers In Agricultural Soils

A 4-year field study was carried out to investigate the effects of three types of biowastes application on PCB accumulation in agricultural soils. This study was based on the experiments designed for four soils in two areas of Palencia province (Spain) (Cerrato and Tierra de Campos) for non irrigated and irrigated land after applying biowaste. The amounts of the three different types of biowastes added were determined according to the fertilization needs of nitrogen for the crop. The concentrations of PCBs in soils were determined before and after biowaste application. The three biowaste treatments raise the concentration of PCBs in the soil, sewage sludge compost (SC) treatment produced the main increase in PCBs concentration, followed by municipal solid waste compost (MC) treatment and the dehydrated sewage sludge (SD) treatment. The values of biowaste treated areas were 3.7-11.5 times higher than the respective values of the non treated areas. Changes observed in the congener distribution also suggest the influence of the biowaste on the soil. The biowaste used had an average PCBs concentration of 63.16 ng g^?1 with a range from 34.08 ng g^?1 to 118.93 ng g^?1, which are values below the EEC recommended limit (800 ng g^?1). In the soils without treatment was found an average concentration 0.206 ng g^?1 of PCBs, typical of areas with low levels of environmental pollution.     

Iron availability thresholds for the inoculation of cucumber with Trichoderma asperellum T34

Inoculation with biocontrol agents can affect iron (Fe) uptake by plants. The objective of this research was to study the necessity of defining a Fe threshold in growth media for the inoculation with the biocontrol agent Trichoderma asperellum T34. A completely randomized experiment with cucumber (Cucumis sativus L.) was performed involving two factors: Fe rate in the growth medium in the form of ferrihydrite (0, 8, 16, 32.5, and 75 mg kg^–1 of citrate‐ascorbate‐extractable Fe (CA‐Fe), and plant inoculation with T34. Dry matter (DM) of aerial parts of cucumber was decreased by T34. This was related to a decreased accumulation of Fe in plants, more in aerial parts than in roots. However, at the highest Fe rate (75 mg kg^–1), differences in DM yield, plant height, and the content and concentration of Fe in shoots between inoculated and noninoculated plants were not significant. The threshold of CA‐Fe in the medium for DM yield of cucumber was 37 mg kg^–1 without T34. With T34, this threshold was 65 mg kg^–1, which implies that, below this limit, additional Fe supply is required for inoculation with T34.     

Effect of the NH4/NO3 ratio on GS and PEPCase activities and on dry matter production in wheat

Previous experiments have indicated that under greenhouse and hydroponic conditions, spring wheat (Triticum aestivum L.) produces higher yields, more tillers and dry matter when supplied with mixtures of NH₄ and NO₃ than when supplied with only one of them. The goal of this study was to evaluate the effect of selected ammonium and nitrate mixtures on dry matter yield, content of soluble protein, and phosphoenolpyruvate carboxylase (PEPCase) and glutamine synthetase (GS) enzymatic activities. Cultivar ‘Salamanca’ wheat plants, 21 days old, were grown in one of five solutions containing one of the following: 7/0, 5/2, 3.5/3.5, 2/5 or 0/7 meq l^‐1 of NH₄NO₃.

After two weeks of treatment applications, the highest dry matter production in both roots and shoots of the 35‐day‐old plants was observed in plants receiving the 2/5 NH₄/NO₃ ratio. The same response was observed on the accumulation of soluble protein and the potential activity of PEPCase. The specific activity of PEPCase was related to the plant applications of ammonium.

Treatments 3.5/3.5 and 2/5 NH₄/NO₃ ratio enhanced leaf GS activity between 28 and 57 days, and it was consistently 300–500% higher than root activity during the same period. Dry weight of the leaves, stems and grain showed the highest yields with those treatments at the physiological maturity of grains (105 days).     

NUTRIENT REQUIREMENTS OF CHAMAEROPS HUMILIS L. AND WASHINGTONIA ROBUSTA H. WENDL PALM TREES AND THEIR LONG-TERM NUTRITIONAL RESPONSES TO SALINITY

The ornamental value of plants used in semiarid areas can be improved by knowledge of their required nutrients and of their nutritional responses under saline conditions. We present a long-term study concerning the nutritional status in Chamaerops humilis and Washingtonia robusta. Two-year-old plants were grown for two years outdoors in pots using water with electrical conductivity values of 2 (control) or 8 dS m^?1 (saline conditions). Nutrient specific absorption rates and leaf nutrient transport rates were estimated by fitting a Richards function regression. We suggest fertilizing C. humilis and W. robusta plants with nitrogen (N): phosphorus pentoxide (P₂O₅): dipotassium oxide (K₂O) ratios of 4:1:5 and 5:1:3, respectively. Diagnosis and Recommendation Integrated System (DRIS) and Plant Analysis with Standardized Scores (PASS) norms were also evaluated. PASS norms provided better nutritional diagnosis than DRIS norms. In saline conditions, PASS-INI (Independent nutrient index) pointed to a deficiency (C. humilis and of nitrogen in W. robusta.