Rapid production of high-strength cement-bonded particleboard using gaseous or supercritical carbon dioxide

This study deals with the effects of curing treatment with gaseous and supercritical carbon dioxide on the properties of cement-bonded particleboard (CBP) manufactured by the conventional cold-pressing method. The hydration of cement and the mechanism of improvement were examined using X-ray diffractometry (XRD), thermal gravimetry (TG-DTG), and scanning electron microscopy (SEM) observations. The results are as follows: (1) The curing of cement was accelerated concomitantly with the improvement in mechanical and dimensional properties of CBP significantly by curing with gaseous or supercritical carbon dioxide. (2) Supercritical carbon dioxide curing imparted boards optimal properties at a faster rate than did gaseous curing. (3) Accelerated formation of calcium silicate hydrate and calcium carbonate and the interlocking of those hydration products on the wood surface are potentially the main reasons for the superior strength of carbon dioxide-cured boards.     

Design and pilot production of a “spiral-winder” for the manufacture of cylindrical laminated veneer lumber

A new spiral-winder was developed for continuous manufacturing of cylindrical laminated veneer lumber (LVL), and a suitable resin adhesive for this cylindrical LVL manufacturing system was investigated. This phase was followed by trial manufacturing and evaluation of cylindrical LVL with the optimum resin adhesive identified. The results are summarized as follows. (1) The shortest gelation time was recorded with a mixture of two commercial resorcinol based resins (DF-1000 and D-33) at a weight ratio of 2575. (2) Bath temperature had a remarkable effect on the gelation time of the adhesive mix. (3) High bonding strength was recorded by 2575 DF-1000/D-33 adhesive mix at a high press temperature despite a short pressing duration. Based on the results of items (1) to (3), 2575 DF-1000/ D-33 is recommended for use in the new spiral-winder. (4) The mechanical properties of cylindrical LVL could be improved by using 2575 DF-1000/D-33 with wider veneer width and longer pressing time. (5) The mechanical properties, especially the modulus of rupture, of the cylindrical LVL manufactured require further improvement for practical structural application.     

Structural characteristics of cell walls of kenaf (<Emphasis Type="Italic">Hibiscus cannabinus </Emphasis>L.) and fixation of carbon dioxide

 Kenaf (Hibiscus cannabinus) plants are widely known for their contribution to the global and regional environment because of their ability to fix CO₂. On the other hand, some scientists have doubts about CO₂ fixation by kenaf and have misgivings about the effect of kenaf on the ecosystem. We have characterized the structural characteristics of cell walls of bast fibers, cores, roots, and leaves of kenaf during the maturation of plants and investigated the rate of photosynthesis. During maturation of the kenaf plant the cellulose (bast fiber 52–59%, core 44–46%) and lignin (bast fiber 9.3–13.2%, core 18.3–23.2%) contents increased significantly. The aromatic composition of the lignin of bast fiber was significantly different from that of the core lignin and of other plants. The lignin of bast fiber appears similar to pure syringyl lignin. Fixation of CO₂ by kenaf plants and their contribution to the global environment are discussed. A significatly high rate of photosynthesis of kenaf plants was observed compared to that of woody plants in Japan, but the amount of CO₂ fixation depends on the characteristics of the plantation. If the kenaf was planted in high density, about twice as much CO₂ was fixed as was fixed by trees in a tropical rain forest. Received: April 22, 2002 / Accepted: July 24, 2002 Acknowledgments This project was supported by the Science and Technology Agency (STA) fellowship of the Japan International Science and Technology Exchange Center (JISTEC), which has been successfully applied by Dr. Shuji Hosoya, Forestry and Forest Products Research Institute. We thank Dr. Toshio Sumizono and Mr. Masao Sakurai, Forestry and Forest Products Research Institute, for their kind help in determining the rate of photosynthesis and cultivating the kenaf plants, respectively. We also express our appreciation to Dr. Quang Hung Le, College of Agriculture and Forestry, Ho Chi Minh City, Vietnam for offering information about the cultivation of kenaf at Thu Duc District, Ho Chi Minh City.     

Identification of an allele attributable to formation of cucumber-like flavor in wild tomato species (Solanum pennellii) that was inactivated during domestication

Carbon 6 (C6)-aldehydes formed by fatty acid 13-hydroperoxide lyase (13HPL) specific to fatty acid 13-hydroperoxides (13-HPO) are important flavor constituents in fresh tomato fruits. C9-aldehydes are usually formed by 9/13HPL showing dual specificity to 9- and 13-HPOs and are scarcely found in tomato fruits. Mature red fruits of one of the introgression lines, IL1-4, generated by hybridization of a cultivated tomato (Solanum lycopersicon) to its wild relative Solanum pennellii, form high amounts of C9-aldehydes upon homogenization. The IL1-4 fruits showed high 9/13HPL activity. One of the genes isolated from IL1-4 showed a high similarity to plant 9/13HPLs. Recombinant proteins expressed in Escherichia coli showed 9/13HPL activity. Cleaved amplified polymorphic sequence analyses indicated that the gene was specific to IL1-4 and S. pennellii. S. lycopersicon had a gene having high similarity to the S. pennellii gene. It was absent in IL1-4. Among the differences of amino acid residues found between the two genes, a Cys to Ser exchange may be responsible for the inactivation of resultant protein product of S. lycopersicon gene because the Cys is an essential amino acid residue for HPL activity. From these observations, it could be assumed that a tomato gene corresponding to S. pennellii 9/13HPL gene had been inactivated through domestication of tomatoes.     

Photoperiod influences the growth, food intake, feed efficiency and digestibility of red sea bream (Pagrus major)

Two consecutive trials were conducted to investigate the effects of photoperiod manipulation on growth rate, food intake and feed conversion efficiency (Trial 1), and the digestibility of nutrients and energy (Trial 2) in red sea bream, Pagrus major (body weight 19–120 g). Fish were exposed to four photoperiods (6L:6D, 12L:12D, 16L:8D and 24L:0D) with light intensity 1500 lx on the water surface. The fish were fed with a commercial diet to apparent satiation. In Trial 2, 0.5% chromic oxide (Cr₂O₃) was used as an inert marker. Significantly higher weight gain and specific growth rates were observed in fish exposed to a 24L:0D photoperiod followed by 16L:8D, 6L:6D and 12L:12D photoperiods (P < 0.05). Food intake and feed conversion efficiency (FCE) were also significantly higher in fish exposed to 24L:0D followed by 16L:8D, 6L:6D and 12L:12D photoperiods (P < 0.05). Fish exposed to 24L:0D and 16L:8D photoperiods showed significantly higher lipid and energy digestibility than those exposed to a 12L:12D photoperiod (P < 0.05). The results demonstrated that the enhancement of growth performances under 16L:8D and 24L:0D photoperiods were attributed to improved appetite, greater food intake and higher feed conversion efficiency as well as higher digestibility.     

Insect glutathione S-transferase: Separation of transferases from fat bodies of American cockroaches active on organophosphorus triesters

Several glutathione S-transferases which catalyze the conjugation of reduced glutathione with organophosphorus triesters were separated from fat bodies of adult female American cockroaches, Periplaneta americana (L.). Two transferases (I, V) were active on diazinon and three transferases (II, III, IV) were active on methyl parathion. The transferase (I) active on the pyrimidinyl moiety of diazinon was distinguishable from the other transferases on the O-methyl portion of methyl parathion, as shown by chromatographic properties, and additionally it was almost inactive or less active on 3,4-dichloronitrobenzene, methyl iodide, p-nitrobenzyl chloride, trans-cinnamaldehyde, and 1,2-epoxy-3-(p-nitrophenoxy)propane. Transferase II had high activities with “aryl” and “aralkyl” compounds, transferase III with “epoxide” and “alkene,” and transferase IV with “alkyl,” “aryl,” and “aralkyl” compounds. This indicated that the transferases had overlapping substrate specificities. The molecular weight was 35,000–37,000 for both of the enzymes active on methyl parathion and diazinon. The pH optima with methyl parathion and diazinon were about 8.5 and 6.5, respectively. At a glutathione concentration of 5 mM, Michaelis constants were 0.28 and 0.13 mM for methyl parathion and diazinon, respectively.     

Photoperiod sensitivity gene controlling heading date in rice cultivars in the northernmost region of Japan

Rice is grown in diverse environments at latitudes ranging from 53^°N to 40^°S. In Japan, Hokkaido is the northernmost rice cultivation region(42–45^°N latitude). Only extremely early maturing (heading) varieties that have extremely low photoperiod sensitivity are adapted to this area. Heading date is the most important trait in adaptation to this particular environment. Also, the efficient manipulation of heading date is a crucial component of rice improvement. To determine the genetic basis for heading date among cultivars grown in Hokkaido, the heading behaviour was analyzed. Clear segregations were observed. To estimate the photoperiod sensitivity of the genes involved, the cultivars and F₁ plants from crosses between the cultivars were grown under different daylength conditions. The results indicated that the genes controlling heading date are photoperiod sensitive, suggesting they play important roles in the northernmost rice cultivation regions in Japan, to which only cultivars with extremely low photoperiod sensitivity are adapted. This revised version was published online in August 2006 with corrections to the Cover Date.