A soil chronosequence in the semi-arid environment of Patagonia (Argentina)

Soil development with time was investigated on beach ridges with ages ranging from about 1380 to 6240 ¹⁴C-years BP at the eastern coast of central Patagonia. The main pedogenic processes are accumulation of organic matter and carbonate leaching and accumulation within the upper part of the soils. Soil formation is strongly influenced by incorporation of eolian sediments into the interstitial spaces between the gravel of which the beach ridges are composed. Different amounts of eolian material in the soils lead to differentiation into Leptosols (containing ≤ 10% fine earth in the upper 75 cm) and Regosols (containing > 10% fine earth). Soil depth functions and chronofunctions of organic carbon, calcium carbonate, pH, Ca:Zr, Mg:Zr, K:Zr, Na:Zr, Fe:Zr, Mn:Zr, and Si:Al (obtained from X-ray fluorescence analysis) were evaluated. To establish soil chronofunctions mean values of the horizon data of 0–10 cm below the desert pavement were used, which were weighted according to the horizon thicknesses. The depth function of pH shows a decrease towards the surface, indicating leaching of bases from the upper centimeters. Chronofunctions of pH show that within 6000 radiocarbon years of soil development pH drops from 7.0 to 6.6 in the Leptosols and from 8.1 to 7.5 in the Regosols. The higher pH of the Regosols is due to input of additional bases from the eolian sediments. Chronofunctions of Ca:Zr and K:Zr indicate progressive leaching of Ca and K in the Regosols, showing close relationships to time (R² = 0.972 and 0.995). Na leaching as indicated by decreasing Na:Zr ratios shows a strong correlation to time only in the Leptosols (R² = 0.999). Both, Leptosols and Regosols show close relationships to time for Fe:Zr (R² = 0.817 and 0.824), Mn:Zr (R² = 0.940 and 0.803), and Si:Al (0.971 and 0.977), indicating enrichment of Fe and Mn and leaching of Si. Leaching of mobile elements takes place on a higher level in the Regosols than in the Leptosols from the beginning of soil formation. Hence, a significant part of the eolian sediments must have been incorporated into the beach ridges very soon after their formation.     

An inter-laboratory comparison of multi-enzyme and multiple substrate-induced respiration assays to assess method consistency in soil monitoring

The use of indicators in soil monitoring schemes to detect changes in soil quality is receiving increased attention, particularly the application of soil biological methods. However, to date, the ability to compare information from different laboratories applying soil microbiological techniques in broad-scale monitoring has rarely been taken into account. This study aimed to assess the consistency and repeatability of two techniques that are being evaluated for use as microbiological indicators of soil quality: multi-enzyme activity assay and multiple substrate-induced respiration (MSIR). Data were tested for intrinsic (within-assay plate) variation, inter-laboratory repeatability (geometric mean regression and correlation coefficient) and land-use discrimination (principal components analysis). Intrinsic variation was large for both assays suggesting that high replicate numbers are required. Inter-laboratory repeatability showed diverging patterns for the enzyme assay and MSIR. Discrimination of soils was significant for both techniques with relatively consistent patterns; however, combined laboratory discrimination analyses for each technique showed inconsistent correspondence between the laboratories. These issues could be addressed through the adoption of reliable analytical standards for biological methods along with adequate replication. However, until the former is addressed, dispersed analyses are not currently advisable for monitoring schemes.     

Economic potential of agroforestry for public recreational parks

The availability of public recreational facilities is being threatened by growing demands, limited supplies, and declining government funding. In response to these pressures, the economic potential of agroforestry for supplementing operating budgets of public recreational parks is examined in a case study park consisting of 324 hectares. Agroforestry enterprises native to the area were selected for development on 70 hectares of the site. Linear programming was used to determine the optimum combinations of 23 agroforestry regimes composed of the following activities: 1) conventional forestry planting, tree density of 1682 trees/hectare, 2) the selected agroforestry planting with hay, tree density of 1495 trees/hectare, 3) the selected agroforestry planting with grazing, 4) hay production, and 5) rental of pasture for grazing. The objective function of the study was to maximize the net present value of the study site subject to land, labor, capital, and minimum annual income constraints. The preferred optimal regime generated $1782 per hectare from an agroforestry planting configuration of 1495 trees/hectare with 75 percent hay, 25 percent grazing, and no annual income requirements. Minimum annual income requirements of $2400 and $4800 were feasible but suboptimal from a net present value criteria. The study found that agroforestry could be used to privatize selective activities of public recreational parks and thus enable public agencies to provide these facilities more effectively.     

New splitting method for wood fracture characterization

Summary A testing procedure with a new and simple specimen shape is presented which is appropriate to characterize fracturing of inhomogeneous and complex materials like wood. With this, the fracture energy of spruce wood is determined in the TL and RL direction. The size effect, i.e. influences of specimen dimensions on K_IC and G_f (specific fracture energy) are investigated. Stress and deformation distribution in the newly developed specimens are analysed with FE methods. The measured load-displacement curves are approximated by bilinear softening diagrams and FE analysis. Based on these results, it is tried to interpret typical deviations from LEFM's behaviour by mechanisms like microcracking, crack branching or crack tip bridging.The authors thank Dr. A. Teischinger for supplying the testing material and Dipl. Ing M. Elser for preparation of the diagrams. Financial support of the Fonds zur Förderung der wissenschaftlichen Forschung, Wien is gratefully acknowledged.     

Stress wave sorting of red maple logs for structural quality

Existing log grading procedures in the United States make only visual assessments of log quality. These procedures do not incorporate estimates of the modulus of elasticity (MOE) of logs. It is questionable whether the visual grading procedures currently used for logs adequately assess the potential quality of structural products manufactured from them, especially those for which MOE is of primary concern. The purpose of this study was to investigate the use of stress wave nondestructive evaluation techniques to sort red maple logs for the potential quality of lumber obtained from them. Ninety-five red maple logs were nondestructively evaluated using longitudinal stress wave techniques and sorted into four stress wave grades. The logs were then sawn into cants and lumber. The same procedure was used to obtain stress wave times in the cants and lumber. The lumber specimens were then dried and graded using a transverse vibration technique. The results of this study showed that good relationships existed between stress wave times measured in logs, cants, and the lumber produced from the logs. It was found that log stress wave grades have positive relationships with the lumber grades. Logs with high stress wave grades produced high-grade lumber. These findings indicate that the longitudinal stress wave technique has potential in sorting logs and cants for the production of high MOE products.The Forest Products Laboratory is maintained in cooperation with the University of Wisconsin. This article was written and prepared by U.S. Government employees on official time, and it is therefore in the public domain and not subject to copyright.     

Utilization of Weather Data in Predicting Bread Loaf Volume by Neural Network Method

The unique ability of wheat (Triticum aestivum L.) flour to produce cohesive dough has helped to make it the most widely used cereal crop for bread and other baked food products. Measurement of end‐use qualities, such as loaf volume, is ideally carried out through assessing loaves of bread; however, this is resource intensive. Predictive testing methods are more often utilized to identify wheat genotypes with potentially acceptable loaf volume, although more accurate predictive methods would be beneficial. Our objectives were to study the influence of weather observations on bread loaf volume and flour and dough quality data, to use a neural network (NN) model to predict loaf volume with select input data, and to compare the best multiple regression models identified with their NN counterparts. Weather data collected at 20 days after heading (DAH) showed the highest correlations with bread loaf volume when compared with prior intervals. A NN model containing maximum, minimum, and nighttime temperatures produced the highest coefficient of determination for predicting loaf volume. Our results showed that the NN model explained up to 20% more loaf volume variation than a similar regression model. Weather parameters representing conditions at 20 DAH played a significant role in loaf volume prediction.     

What is new about new forest owners? A typology of private forest ownership in Austria

With structural changes in agriculture, new types of forest owners have become increasingly important. This article develops an empirically-based typology of forest owners in Austria. Based on a representative survey and by means of cluster analysis, seven types of forest owners are identified. These types form a sequence, ranging from forest owners with a strong agricultural background to forest owners with no agricultural background at all. The latter exhibit markedly different behaviour in various respects, e.g. in their interest in forest-related information. The increasing number of ‘new’ forest owners raises important questions for forest policy, especially how policy instruments can reach these owners and how extension services can address them.     

The occurrence of reflexes and reactions in cattle following stunning with a captive bolt at the slaughterhouse

The difference in the frequency of the occurrence of reflexes/reactions in 355 cows (average weight 505.5 ± 7.9 kg) and 262 bulls (average weight 735.6 ± 8.4 kg) following stunning with a Matador SS 3,000 B trigger‐activated captive bolt gun (Termet) was determined. The stun shot more than 2 cm from the ideal position was found in 79.6% of animals. Vocalization, corneal reflex, rhythmic breathing, blinking, eyeball rotation and the absence of tongue protrusion occurred more frequently in bulls (p < .05). Spontaneous limb movements and nystagmus occurred more frequently in cows (p < .05). No difference between bulls and cows was determined in the occurrence of a response to painful stimuli or attempts to regain normal posture. No dependency was determined between the frequency of the occurrence of a reflex/reaction and the distance of the stun shot from the ideal point on the skull for any of the monitored signs. This study shows that the occurrence of reflexes/reactions following the stunning of cattle with a captive bolt is not only dependent on the position of the shot if placed within a 9 cm radius from the ideal point on the cattle skull.