Strength and Microstructure of Sulphoaluminate Cement Containing Ultra- Fine CaCO3

The existence of ettringite in sulphoaluminate cement hardened paste is mainly in the form of pole-like crystal,which causes unfavorable effect on the cement.In this paper the strength and microstructure of the sulphoaluminate cement containing ultra-fine CaCO_3 weze discussed.Experimet results show that the strength of sulphoaluminate cement was obviously improved by adding 3% of ultra-fine CaCO_3.After curing for 28d,the compressive strength of cement paste and mortar is 100.6MPa and 94.1MPa respectively,and the bending strength of the mortar reached 12.5MPa.SEM study on hardened paste of sulphoaluminate cement containing ultra-fine CaCO_3 showed that its structure was dense and homogeneous,there was hardly any massive crystall detected.     

Digital Beamforming for Unified Spread Spectrum TT&C System

In TT&C system,unified spread spectrum framework and adaptive antenna digital beamforming technologies are used to track, telemetry and command objects. Constant modulus array (CMA) and adaptive signal canceller estimate the direction of arrival (DOA) of every signal and use the optimum weighted vector to form the beams. The phase weighted vectors estimated from DOA improve the processing gain as well as being utilized in the transmitting of tele command signal to form the beam of specified object. Its processing performance is researched and simulated in this paper.     

Application and Advancement of Reinforced Earth Technique

In this paper, the application of reinforced earth technique, principle and calculation method, new reinforced materials developed and produced are introduced. A few of key technical problems in reinforced earth application is discussed, such as reinforced earth behavior, calculation method, durability of reinforced material, amendment and complement of the current standards. Then, the reinforced earth technique development and advancement were introduced.     

Real-time Vehicle Scheduling

The traditional scheduling for vehicle is option in the fixed network. But it can't satisfy the real time environment. The demand of order is changeable and uncertain in real environment. It is convenient for scheduling transforming it into static data, but can't get the advantage on time. This paper proposes a real time vehicle scheduling on the study of traditional scheduling and discusses the model structure and the key technology for the real time system that establishes the base for develop teal time system.     

An Expert Knowledge-acquisition Method on Line of Automatic Excluding Errors

Aimed at soving the problem existing in the knowledge-acquisition directing-operation expert systems, a new method is proposed to acquire knowledge of expert-operation, excluding errors existed in examples and reinforce the accuracy of examples,the goal of knowledge acquisition can be achieved, the method presented in this paper solves the problem of self-enhancement of expert knowledge on line efficiently.     

Analysis on the Constructor Associations Localization

Along with the establishment of the constructor association,how to locate the constructor association is extremely important at present,which is not only related to the efficiency of the constructor trade management,but also related to the future development of the constructor trade.This paper launches the discussion on the constructor association's localization from three aspects,namely the legal localization,the profession localization and the relation localization with the government and its members,and puts forward some proposals and individual opinions.     

FEM on Coupled Hydromechanical Dynamic Response of Geogrid Reinforced Soil Retaining Wall

Geogrid reinforced soil retaining wall(GRSRW) is composed of panel,geogrid and soil,its coupled hydromechanical structural characteristics are increasingly emphasized in practice.In this paper,based on the characteristics of the reinforcement-soil interaction,the grogrid and soil around it with a definite thickness were regarded as a kind of composite material with strain-compatible condition.A saturated porous media model was introduced to simulate the soil and reinforcement-soil composite material hereby and the mathematic model for numerical analysis on structural characteristics of GRSRW was built up.The FEM equations were deduced from the standard Galerkin procedure,resolving these equations,we can gain the relevant dynamic response of saturated GRSRW.     

棉花烂铃空间格局及抽样技术研究

本文通过聚集度指标（如：Ｃ、Ｋ、Ｃ＿Ａ、Ｉ、Ｉ＿δ、）测定，以及Ｉｗａｏ’线性回归、Ｔａｙｌｏｒ’ｓＳ￣２一回归和格局纹理分析，结果表明，棉花烂铃空间格而在一切密度下都呈聚集型，且聚集强度随烂铃密度的升高而增加，其空间格局的基本成分是疏松的个体群，其大小约为２～５株棉花，平均约含２．８４个烂铃个体，且个体群内的个体呈随机分布，经μ检验和方差分析，双对角线５点式、棋盘式和平行跳跃式等３种取样方法均适用于棉花烂铃田间调查，尤以双对角线５点式为佳，用双对角线５点式应样法调查的最适抽样数：一般病情普查至少１０个样方（每样方系５株棉花），系统测报和科研调查为２０～３０个样方。最后给出了棉花烂铃平均密度的零频率简易估计模型。     

Modeling soil water dynamics in a drip-irrigated intercropping field under plastic mulch

Intercropping, drip irrigation, and the use of plastic mulch are important management practices, which can, when utilized simultaneously, increase crop production and save irrigation water. Investigating soil water dynamics in the root zone of the intercropping field under such conditions is essential in order to understand the combined effects of these practices and to promote their wider use. However, not much work has been done to investigate soil water dynamics in the root zone of drip-irrigated, strip intercropping fields under plastic mulch. Three field experiments with different irrigation treatments (high T1, moderate T2, and low T3) were conducted to evaluate soil water contents (SWC) at different locations, for different irrigation treatments, and with respect to dripper lines and plants (corn and tomatoes). Experimental data were then used to calibrate the HYDRUS (2D/3D) model. Comparison between experimental data and model simulations showed that HYDRUS (2D/3D) described different irrigation events and SWC in the root zone well, with average relative errors of 10.8, 9.5, and 11.6 % for irrigation treatments T1, T2, and T3, respectively, and with corresponding root mean square errors of 0.043, 0.035, and 0.040 cm³ cm^?3, respectively. The results showed that the SWC in the shallow root zone (0–40 cm) was lower under non-mulched locations than under mulched locations, irrespective of the irrigation treatment, while no significant differences in the SWC were observed in the deeper root zone (40–100 cm). The SWC in the shallow root zone was significantly higher for the high irrigation treatment (T1) than for the low irrigation treatment, while, again, no differences were observed in the deeper root zone. Simulations of two-dimensional SWC distributions revealed that the low irrigation treatment (T3) produced serious severe water stress (with SWCs near the wilting point) in the 30–40 cm part of the root zone, and that using separate drip emitter lines for each crop is well suited for producing the optimal soil water distribution pattern in the root zone of the intercropping field. The results of this study can be very useful in designing an optimal irrigation plan for intercropped fields.     

电动助力转向系统转向性能的客观评价

针对电动助力转向的结构特点，分析了电动助力转向对汽车转向性能的影响，提出从转向轻便性、转向回正性、转向盘中间位置区域性能、转向盘振动、随动灵敏度和助力特性等方面进行电动助力转向系统转向性能的客观评价，并探讨了相应的评价指标，对电动助力转向助力控制规律、基本设计参数以及相关试验标准的确定有指导意义。