Characterizing rangeland vegetation using Landsat and 1-mm VLSA data in central Wyoming (USA)

As an alternative to ground-cover data collection by conventional and expensive sampling techniques, we compared measurements obtained from very large scale aerial (VLSA) imagery for calibrating moderate resolution Landsat data. Using a grid-based sampling scheme, 162 VLSA images were acquired at 100 m above ground level. The percent vegetation cover in each photo was derived using SamplePoint (a manual inventory method) and VegMeasure (a reflectance based, automated method). Approximately two-thirds of the VLSA images were used for calibrating Landsat data while the remainder was used for validation. Regression models with Landsat bands accounted for 55% of the VegMeasure-based measurements of vegetation, whereas models that included both Landsat bands and elevation data accounted for 67%. The relationship between the Landsat bands and the percent vegetation cover measured by SamplePoint was lower (R ² = 20%), highlighting the differences between the inventory and reflectance based protocols. Results from the model validation indicated that the model’s predictive power was lower when the vegetation cover was either <20% or >55%. Additional work is needed in these ecosystems to improve the calibration techniques for sites with low and high vegetation cover; however, these results demonstrate the VLSA imagery could be used for calibrating Landsat data and deriving rangeland vegetation cover. By adopting such methodologies the US Federal land management agencies can increase the efficiency of the monitoring programs in Wyoming and in other western states of the US. Mention of trade names is for information only and does not imply endorsement by USDA over comparable products or services.     

Germination and seedling growth of <Emphasis Type="Italic">Dimorphandra jorgei</Emphasis> MF Silva and <Emphasis Type="Italic">Swartzia macrostachya</Emphasis> Benth. var. <Emphasis Type="Italic">riedelii</Emphasis> Cowan

Dimorphandra jorgei MF Silva (Caesalpinaceae) and Swartzia macrostachya Benth. var. riedelii Cowan (Fabaceae) are tree species from the southern Bahian Atlantic Forest, identified for the restoration of degraded areas. The objective of this research is to study their seed germination and seedling growth to develop simple methods for seedling production in small scale nurseries. Because the species have distinct dormancy and germination characteristics, the seeds were submitted to different treatments. D. jorgei seeds were immersed in hot water, scarified and stored for 12 weeks in the laboratory environment (25°C). S. macrostachya seeds were submitted to different combinations of drying and storage in the laboratory environment or refrigerator (4°C). Seedlings were submitted to two light treatments for 3 months: partial shade (52% of full sun) and full shade (12% of full sun). In D. jorgei, the highest germination occurred for scarified seeds (87%) and for seeds stored for 12 weeks and then scarified (69%). In S. macrostachya the undried control seeds had the highest germination, followed by that of the refrigeration storage treatment, without predrying (99% and 97%, respectively). The average values for the growth parameters were greater in full shade for D. jorgei, while S. macrostachya seedlings showed greater growth rates in partial shade. Two months growth is recommended before D. jorgei seedlings are of the sufficient size and leaf number for field planting. On the other hand, a period of 4 months is recommended for S. macrostachya, due to its relatively slow growth.     

Combining the use of molecular techniques and archival documentary evidence to trace the origin of <Emphasis Type="Italic">Populus alba</Emphasis> in a Central Mediterranean archipelago

The nativity of Populus alba in the Mediterranean has only been confirmed in the last decade, following the discovery of 8,000-year-old leaf imprints in Southern France. Recent evidence has even emerged from molecular studies suggesting that the species is native to some of the islands, and these populations may be relicts of a native flora that arrived there much earlier than previously thought. In view of this, samples obtained from the Central Mediterranean archipelago of Malta and other neighbouring regions were analysed to determine the native status of the Maltese populations and possibly trace their origins. All 38 samples were investigated in order to assess the genetic diversity and origin of Maltese trees. Nuclear microsatellite analysis revealed that all 28 trees sampled from the two islands of Malta belonged to one clone. Chloroplast data suggested relatedness of the Maltese clone to Italian P. alba samples. However, nuclear data suggested additional admixture through pollen from North Africa. Existing archival and palaeontological records were also examined for any supporting evidence. On considering the latter records in combination with molecular evidence, we arrived to the conclusion that arrival of this clone in Malta through human introduction in the sixteenth century is the most likely explanation, since alternative scenarios like autovegetative propagation or arrival by seed seem highly unlikely.     

Use and effectiveness of Washington state’s extension forest stewardship program

This paper describes the use by family forest landowners of educational programs provided by Washington State University Cooperative Extension (WSUCE), and the associated use of technical assistance programs provided by state and federal agencies and the private sector. Approximately 100,000 family forest owners controlled 19% or over 1.2 M ha of Washington’s forestland and accounted for 29% of the timber harvested in the state on a volume basis in 1998. A variety of public and private assistance and education programs are available to encourage and help family forest owners manage their forests. In 1999 a mail survey was conducted to evaluate use and effectiveness of Washington’s family forest assistance and education programs. Over half of the 872 responding family forest landowners had contact with an extension educator, program or educational material, and about three quarters of these respondents gave an overall rating of the usefulness of extension programs and materials as good or excellent. Respondents attending WSUCE forestry educational programs have larger median land ownership size, are older, have owned their forests longer, have a higher rate of absentee ownership, and are better educated than non-users. They are more likely to actively manage their forests for timber production and exhibit a clearer understanding of the multiple-use capabilities of their forests.     

Modelling interactions amongst people and forest resources at the landscape scale

FLORES, the Forest Land Oriented Resource Envisioning System, is a framework to facilitate quantitative modelling of ecological, economic and social issues at the landscape scale. This issue ofSmall-scale Forest Economics, Management and Policy describes the evolution of FLORES from a concept to a series of models calibrated for diverse locations, and documents the lessons learned. The idea to construct and use landscape-scale models of the forest frontier, based on simulating household decisions and land use at a spatial scale close to the field level, arose from a desire to add rigour to land-use policy research at CIFOR, the Center for International Forestry Research (Vanclay 1995). This simulation modelling approach to addressing interdisciplinary issues, where people are strongly interacting with forest resources, became known as FLORES, the Forest Land Oriented Resource Envisioning System (Vanclay 1998). Muetzelfeldtet al. (1998) constructed a simple prototype of a FLORES model to illustrate the concept and demonstrate the ability of a system-dynamics modelling environment to animate such a model (Muetzelfeldt and Taylor 1997, 2001, Muetzelfeldt and Massheder 2003). In 1999, FLORES became a reality, when 50 scientists from diverse disciplines met in Bukittinggi, Indonesia to construct the first FLORES model styled on this prototype (CIFOR 1999, Vanclayet al. 2003). The research reported in this special issue was made possible by generous financial support from the Department for International Development (UK), the European Community, the Asian Development Bank (under RETA 5812) and the Center for International Forestry Research. The views expressed herein are those of the authors alone. We would like to thank the following people who have assisted in the production of this special issue by acting as anonymous referees for these and other papers: Andy Warner, Brendan Moran, Bruno Verbist, Chris Dake, Chris Legg, Doug Sheil, Euan Mason, Francois Bousquet, Frank Vanclay, Geoff Slaughter, James Gambiza, John Herbohn, John Poulsen, Jungho Suh, Mike Spilsbury, Paul Phillips, Paul van Gardingen, Phil Norman, Philip Nyhus, Roger Wheate, Ross Sigley, Steve Harrison and Tom Evans. Thanks also to the editorial staff, especially Steve Harrison, John Herbohn and Jungho Suh, for making this special issue possible.     

Effects of thinning on wind damage in Pinus thunbergii plantation ——Based on theoretlcal derlvation of risk—ratios for assessing wind damage

Based on paper of “Theoretical derivation of risk-ratios for assessing wind damage in coastal forest“,wind damage in the pine coasteal forest,which was thinned at four levels in December of 1997,was investigated for four successive growing seasons.Besides wind damage,the wind profiles outside and inside the coastal forest stand and the distributions of optical stratification porosity (OSP) were also observed.Based on these data,risk-ratios of wind damage for both individual trees and stands were estimated according to the methods developed in “Theoretical derivation of risk-ratios for assessing wind damage in a coastal forest“.The results showed that risk-ratios of wind damage,which were calculated from the meen height and diameter only and from the combination of wind and stand sructure profiles,accurately predicted wind damage in the plantation.Relationships between different thinning ratios and incidence of wind damage showed that stand stability decreased soon after the thinning.This was due to the immediate effects of thinning on increasing the canopy roughness and wind load,and on decreasing the sheltering effects from surrounding trees.However,thinning strategies could improve the stability by long-term effects on growthand development of trees against extreme wind.Only canopy damage was recorded during the experimental period,no stem damage was found,even though the maximum 10-min wind speed outside the coastal forest attained 30.2m s^-1.The results obtained in this study indicate that thinning is the most effective silvicultural strategy available for managing coastal forest despite the increased probability of wind damage soon after thinning.     

Effect of tool angles on the chips generated during milling of wood by straight router-bits

 The effect of tool angles on the shapes of chips generated by parallel-to-grain and end-grain milling was explored for China fir and maple under fixed spindle and feed speeds and cutting depth. The milling path was up-milling by straight router-bits with a diameter of 12 mm. The chip shapes could be distinguished as five types: spiral, splinter, flow, thin, and granules or powder. The flow and thin chips were generated most often (on a weight percentage basis) for all tool angles investigated for parallel-to-grain and end-grain milling of China fir and maple. More granule chips were produced with parallel-to-grain milling than with end-grain milling for both woods. The measured chip thickness (t′) was thicker than the calculated thickness (t _max). Thicker and longer maple chips were produced by end-grain milling than by parallel-to-grain milling. The tool geometries of 40°/15° (sharpness of the angle–rake angle), 50°/15°, and 60°/15° for China fir and 40°/25°, 50°/5°, and 60°/5° for maple produced relatively more flow chips with parallel-to-grain milling. Furthermore, the tool geometries of 40°/5°, 50°/15° and 60°/25° produced more flow chips (weight percentage) by end-grain milling of China fir and maple. Received: May 23, 2001 / Accepted: June 28, 2002 Acknowledgment This study was supported by a grant from the National Council of Science, Taiwan (NSC89-2313-B-415-011).     

Importance of rubberwood in wood export of Malaysia and Thailand

We examined the contribution of rubberwood to the timber export markets of Malaysia and Thailand. In Malaysia, rubberwood has grown from 26% of total exported wood products in 1998 to 35% in 2007. A high proportion of furniture products (80%) is rubberwood, whereas the contribution of rubberwood to other wooden products is less than 20%. Only 10% of sawn timber and logs is rubberwood. In Thailand, rubberwood contributes to around 60% of total exported wood products, arising from a high share of not only furniture products (70%) but also other wood products (around 50%) and sawn timber and logs, which have increased in share from 40% in 1998 to 79% in 2007. We conclude that the high proportion of rubberwood products in the wood export markets of these two countries is a result of: (1) scarcity of raw wood materials because of strict controls on the logging of natural forests; and (2) governmental support to rubberwood production, including financial support to rubber planters and technical assistance to downstream timber processors.     

Achieving food and nutritional security through agroforestry: a case of <Emphasis Type="Italic">Faidherbia albida</Emphasis> in sub-Saharan Africa

Faidherbia albida is an ideal agroforestry tree commonly intercropped with annual crops like millet and groundnuts in the dry and densely populated areas of Africa. With its peculiar reverse phenology, it makes growth demands at a different time from that of crops. In addition, it deposits great amount of organic fertilizer on food crops. Leaves entering soils are comparable to fertilization of almost 50 t·ha 1 ·year 1 of manure in dense stands of 50 large trees per ha. These nutrients help maximize agricultural production and reduce the need for a fallow period on poorer soils. Research has shown that millet grown under F. albida yielded 2.5 and 3.4 fold increases in grain and protein, respectively. Animals eat pods which contain mean amounts of crude protein of 20.63% and carbohydrate of 40.1% in seeds. Moreover, the continued existence of F. albida in agroforestry parklands as in Ethiopia and Mali signifies the success of traditional conservation measures. Modern scientists have also developed much interest in the role of agroforestry in maintaining long-term biological balance between agriculture and livestock production systems. To ensure food security, which still remains a major challenge in sub-Saharan Africa, and concurrently minimize environmental degradation, promotion of agroforestry that specifically involves indigenous trees is crucial. We discuss the prospective role of F. albida in alleviating poverty while simultaneously protecting the environment from factors associated with, for example, deforestation and loss of biodiversity. The overall aim is to promote wide-scale adoption of F. albida as a valuable tree crop in farming systems, particularly in those areas where it remains unexploited.     

Pine wilt disease: a short review of worldwide research

This article summarizes the results of the research papers presented at the International Symposium on pine wilt disease (IUFRO Working Party Meeting 4.04.03) held in July 2009, at Nanjing, China. The general topics covered were on pine wilt disease (PWD), its causal organism, the pinewood nematode (PWN) Bursaphelenchus xylophilus, plus other PWN-associated microorganisms that play a significant role in PWD such as bacteria (e.g. Pseudomonas fluorescens). Most of the papers that are reviewed are based on work on PWD-PWN in East Asia and Russia. Specific topics covered include: 1) the fundamental conceptions of PWD development, 2) pathogenicity, 3) host-parasite relationships including the histopathology of diseased conifers and the role of toxins from bacteria-nematode ecto-symbionts, 4) PWN life cycle and transmission, 5) B. xylophilus dissemination models, 6) associations (with other nematodes), 7) diagnostics, 8) quarantine and control of the PWN and 9) biocontrol of the PWN.