Production and Identification of Clone Sheep Using Bone Marrow Mesenchymal Stem Cells as Donor Cell

In order to obtain the cloned sheep using bone marrow mesenchymal stem cells（BMSCs）as the donor cells,the BMSCs of sheep were chosen and reconstructed embryos were built to transfer.10 published microsatellite markers were chosen,and the DNA samples from clone sheep,donor cells and surrogate ewes were amplified,and the relationship of father-son（RCP）was analyzed using the Quantity One for genotyping.The results showed that the reconstructed embryos were successfully built for electric fusion using sheep BMSCs as nuclear donor,and making nuclear transplantation into enucleated mature oocytes of which the fusion rate was 80.62%.20 surrogate ewe were chosen to be implanted with the reconstructed embryos at morula stage by implant surgery,and 5 lambs were born and only 3 were survived.The genotype of cloned sheep was in line with the dornor cell and the RCP were more than 99.999%.In conclusion,the first clone sheep were obtained successfully by using BMSCs as a nuclear donor in this experiment.     

Analysis on Differential Expression Genes in Porcine Aortic Vascular Endothelial Cells Induced by Apolipoprotein C Ⅲ

The aim of this study was to investigate the differential expression genes induced by ApoCⅢ,and study the function of ApoCⅢ.Porcine aortic vascular endothelial cells were successfully isolated using enzyme digestion,and then screened the differential expression genes induced by ApoCⅢ using the Solexa high-throughput sequencing technology.The results showed 647 differential expression genes,including 390 up-regulated genes and 257 down-regulated genes.The qRT-PCR results verified that the gene expression results from Solexa sequencing data were reliable.GO and Pathway analysis showed that the function of differential expression genes were related to immune response,cell apoptosis and death.These findings suggested that ApoCⅢ affected the physiological function of porcine aortic endothelial cells by the molecular pathways of inflammation,cell adhesion and apoptosis,which provided a theoretical basis for further understanding the molecular mechanisms of atherosclerosis caused by ApoCⅢ.     

Tenogenic induction of equine mesenchymal stem cells by means of growth factors and low-level laser technology

Tendons regenerate poorly due to a dense extracellular matrix and low cellularity. Cellular therapies aim to improve tendon repair using mesenchymal stem cells and tenocytes; however, a current limitation is the low proliferative potential of tenocytes in cases of severe trauma. The purpose of this study was to develop a method useful in veterinary medicine to improve the differentiation of Peripheral Blood equine mesenchymal stem cells (PB-MSCs) into tenocytes. PB-MSCs were used to study the effects of the addition of some growth factors (GFs) as TGFβ3 (transforming growth factor), EGF2 (Epidermal growth factor), bFGF2 (Fibroblast growth factor) and IGF-1 (insulin-like growth factor) in presence or without Low Level Laser Technology (LLLT) on the mRNA expression levels of genes important in the tenogenic induction as Early Growth Response Protein-1 (EGR1), Tenascin (TNC) and Decorin (DCN). The singular addition of GFs did not show any influence on the mRNA expression of tenogenic genes whereas the specific combinations that arrested cell proliferation in favour of differentiation were the following: bFGF2 + TGFβ3 and bFGF2 + TGFβ3 + LLLT. Indeed, the supplement of bFGF2 and TGFβ3 significantly upregulated the expression of Early Growth Response Protein-1 and Decorin, while the use of LLLT induced a significant increase of Tenascin C levels. In conclusion, the present study might furnish significant suggestions for developing an efficient approach for tenocyte induction since the external administration of bFGF2 and TGFβ3, along with LLLT, influences the differentiation of PB-MSCs towards the tenogenic fate.     

利用香菇菌糠栽培罗勒初探

以香菇菌糠为试材,采用不同比例的香菇菌糠和花园土、砂土的混合基质种植罗勒,测定其发芽率、形态指标以及生理指标,研究了香菇菌糠对罗勒幼苗生长的影响。结果表明:适宜种植罗勒的菌糠配方为花园土、菌糠、砂子=6∶1∶1;不同比例的菌糠配方对罗勒的发芽率有一定影响,随着菌糠比例的不断增加,罗勒的发芽率也不断提高,发芽时间也随菌糠的增加有一定缩短;该试验为菌糠的循环利用开辟了一条新的途径。     

曲拉通和硝酸混合溶液直接提取快速测定草鱼中铅含量

为建立快速测定草鱼中铅含量的方法,通过分析曲拉通和硝酸混合溶液浓度、提取时间、称样定容体积比例等因素的影响,以及基体改进剂的使用效果,确定了草鱼中铅元素提取测定的最佳条件。验证结果显示：采用曲拉通和硝酸混合溶液提取草鱼中铅元素方法的提取率为86.5%～95.6%,加标回收率为91.5%～95.6%,精密度均小于4.0%,检出限和定量限分别为0.011和0.032 mg/kg,满足了国家标准GB 5009.12—2017第一法石墨炉原子吸收光谱法的要求。与国家标准方法比较,本研究建立方法的样品前处理时间从4～12 h缩短至0.2 h内,酸试剂用量从湿法消解的7～12 mL减少至1～2 mL;前处理过程无需高温消解,无需其他前处理设备,避免了样品污染和待测元素损失,实现了降低分析成本以及保护环境和试验人员的目的。结果表明,该方法是一种简单、准确、绿色、快速测定草鱼中铅含量的方法,尤其适合大量样品检测。     

带分流叶片的离心泵叶轮三维贴体网格生成

采用泊松方程进行带分流叶片的离心泵叶轮内三维贴体网格的自动生成 ,并通过源项控制来满足网格的正交性及调整网格疏密。计算时根据边界处网格线正交的控制角和控制距离的几何约束确定边界条件 ,利用分块粘接技术生成了带分流叶片离心泵叶轮内的三维分块结构化贴体网格 ,从而提高了流场流动分析中前处理环节的效率和精度 ,能使在湍流计算中广泛应用的壁面函数法的条件容易满足 ,并能使普遍采用的压力第二边界条件直接用于计算中 ,还能满足差分要求 ,减小离散误差。     

柴油机机体的模态分析与减振设计

采用 ANSYS有限元分析软件 ,对一直列 6缸柴油机机体进行了模态分析 ,并与实验模态分析结果相比较 ,验证了计算模型的正确性。在该模型的基础上 ,从增加刚性和减少质量方面进行了研究 ,结果表明 ,铝制机体以及梯形框架结构和加强板结构均可减小机体的振动 ,进而降低发动机的噪声。     

Physiological and pathological roles of mast cells in adipose tissue

Mast cells are important cells for the innate immunity that reside in tissues including adipose tissue and are involved in various physiological and pathological processes by producing a range of biological mediators. Adipose tissue not only acts as an energy depot and regulator of energy homeostasis that can deposit excess energy and dissipate energy through heat, but also is an active endocrine organ capable of producing hormones and adipokines. The dysfunction of adipose tissue is highly correlated with metabolic disorders, such as obesity, type 2 diabetes mellitus and so on. This review focuses on the physiological and pathological roles of mast cells in adipose tissue.