The Content of Dietary Fibre and Polyphenols in Morphological Parts of Buckwheat (<Emphasis Type="Italic">Fagopyrum tataricum</Emphasis>)

In this report, we presented the profile of polyphenolic substances in flowers, leaves, stalk and roots of Fagopyrum tataricum estimated by using RP–UHPLC–ESI-MS equipment (reversed-phase ultra-high-performance liquid chromatography electrospray ionisation mass spectrometry). The neutral detergent fibre, acid detergent fibre, acid detergent lignin, cellulose and hemicellulose were also determined. Flowers, leaves, stalk and roots showed varying levels of dietary fibre and polyphenols. The highest content of neutral and acid detergent fibre were found in the roots (63.92 and 45.45% d.m., respectively) while the most rich in phenolic compounds were flowers (4.8 mg/1 g d.m.). Root and stalk contained the highest level of cellulose, 38.70 and 25.57% d.m., respectively. Among the investigated polyphenolic substances such as: 2,6-dihydroxybenzoic acid, 3,4-dihydroxybenzoic acid, 3,5-dihydroxybenzoic acid, 4-hydrobenzoic acid, caffeic acid, catechin, chlorogenic acid, fagopyrin, ferulic acid, myricetin, gallic acid, isovanilic acid, isovitexin, kaempferol, luteolin, p-coumaric acid, procyanidin B2, quercetin, quercetin 3-D galactoside, rutin, syringic acid and vitexin, we observed that the contents of rutin and chlorogenic acid were the highest. We found some correlation between dietary fibre fractions and individual phenolic substances. The levels of acid detergent fibre (ADF), cellulose and hemicellulose were negatively correlated with isovitexin, kaempferol, vitexin, fagopyrin, caffeic acid and procyanidin B2 content. In this investigation, two solvents (water and methanol) were estimated regarding their extraction efficiency of phenolic compounds. Taking these results into consideration, we recommend using methanol as the extractor to isolate chlorogenic acid, fagopyrin, kaempferol, procyanidin B2, quercetin, quercetin 3-D-galactoside, rutin, vitexin, and water for other investigated polyphenolic substances obtained from Fagopyrum tataricum.     

Blueberry Residue Encapsulation by Ionotropic Gelation

In the processing of fruits such as blueberry (Vaccinium sp), that has high levels of phenolic acid, the food industry produces tons of organic waste that causes harm to the environment. Encapsulation is a technique used to take advantage of these wastes. Several methods are used to encapsulate substances, among them ionotropic gelation proves to be a simple, precise, efficient and economical method for obtaining particles with encapsulated bioactives. In this manner, the aim of this study was to test sodium alginate as wall material to encapsulate blueberry residue by ionotropic gelation. The microbeads were characterized by scanning electron microscopy (SEM), x-ray diffraction (XRD), total phenolic compounds, antioxidant capacity and in vitro dissolution. The results showed that the microbeads had surface invagination; retention of 67.01% of the phenolic compounds after encapsulation and 68.2%, phenolic release 120 min after in vitro dissolution. The results suggest that the tested matrix was suitable for encapsulation. The produced microbeads are promising for applications in food products, once the phenolic compounds present in the blueberry residues were maintained after encapsulation.     

Analysis of Variation in Anthocyanin Composition in Korean Coloured Potato Cultivars by LC-DAD-ESI-MS and PLS-DA

Anthocyanin concentration and composition and the effect of steaming and baking on these were evaluated in tubers of Korean red- and purple-fleshed potato cultivars and breeding clones using liquid chromatography with diode array detection and electrospray ionization-mass spectrometry (LC-DAD-ESI-MS). Twenty-six anthocyanins were isolated, of which 24 were identified. Remarkably, five cis isomers were identified, of which four, viz., cis-petanin, cis-peonanin, petunidin 3-cis-caffeoylrutinoside-5-glucoside, and petunidin 3-cis-feruloylrutinoside-5-glucoside, are reported for the first time. Moreover, pelargonidin 3-p-coumaroylrutinoside-5-glucoside (pelanin), peonidin 3-p-coumaroylrutinoside-5-glucoside (peonanin) and petunidin 3-p-coumaroylrutinoside-5-glucoside (petanin) were identified as the principal anthocyanins. We found that the total anthocyanin content of coloured potatoes was decreased by steaming and baking compared with the raw state. In addition, we performed partial least square discriminant analysis (PLS-DA) to discriminate between the analyzed anthocyanins. Cis isomers seemed to play a vital role as a biomarker in the PLS-DA model based on the type of processing and colour of the tubers.     

Effects of rice straw,biochar and mineral fertiliser on methane (CH<Subscript>4</Subscript>) and nitrous oxide (N<Subscript>2</Subscript>O) emissions from rice (<Emphasis Type="Italic">Oryza sativa</Emphasis> L.) grown in a rain-fed lowland rice soil of Cambodia: a pot experiment

We studied the effects of water regimes and nutrient amendments on CH₄ and N₂O emissions in a 2 × 3 factorial, completely randomised growth chamber experiment. Treatments included continuously flooded (CF) and alternate wetting and drying (AWD), and three organic amendments: no amendment-control, rice straw (RS) and biochar (BC). Compound fertiliser was applied to all treatments. Rice was grown in columns packed with a paddy soil from Cambodia. Results revealed faster mineralisation of organic carbon (RS and BC) when applied in water-saturated conditions lasting for 2 weeks instead of flooding. This resulted in lower total CH₄ emissions in treatments under AWD than those under the CF water regime, namely 44 % in RS treatments and 29 % in BC treatments. Nitrous oxide fluxes were generally non-detectable during the experimental period except after fertilisation events, and the total N₂O–N emissions accounted for on average 1.7 % of the total applied mineral fertiliser N. Overall, the global warming potentials (GWPs) were lower in treatments under AWD than those under the CF water regime except for the control treatment with only mineral fertiliser application. Grain yields were slightly higher in treatments under AWD than the CF water regime. Hence, the yield-scaled GWP was also lower in the treatments under the AWD water regime, namely 51 % in RS, 59 % in BC and 17 % in control treatments. Control treatments had the lowest GWP, but provided the highest yield. The yield-scaled GWP under these treatments was therefore lower than under the other treatments.     

Conjugating S-nitrosothiols with fluorescent nanofibers for the controlled release and real-time detection of nitric oxide

In this work, a novel hybrid fibrous vehicle was developed for the release and real-time detection of nitric oxide (NO). The vehicle consisted of poly(L-lactide)/chitosan (PLLACS), cadmium tellurium quantum dots (CdTe QDs), and conjugating S-nitrosothiols. CdTe QDs were placed on the surface of PLLACS fibers as NO fluorescent probes through coaxial electrospinning; in this method, the PLLACS was used as filament material. Water-dispersible CdTe QDs were synthesized using mercaptoacetic acid as a stabilizer. The amino groups of chitosan served as reactive sites where chitosanbased S-nitrosothiols were formed. The fibrous PLLACS-QDs-NO composite was found to release NO under UV. The released NO could be detected in real time on the basis of the fluorescence quenching mechanism of QDs. These PLLACSQDs-NO nanofibers provide insights into novel designs of biocompatible NO delivery systems.     

Mechanical behavior of composites reinforced with fibers caroa

Composites were prepared with 13, 23 30 and 40 % fiber and evaluated the mechanical performance in tensile, flexural and impact. The mechanical properties of these composites were also evaluated function of time at 110 °C thermal exposure. Caroa fibers were characterized by techniques such as thermal gravimetric analysis (TGA), X-ray diffraction (XRD) and scanning electron microscopy (SEM). It was found that the best mechanical properties were achieved for composites containing 23 to 30 % fiber. The incorporation of 23 % fiber caroa increased both the modulus of elasticity in the tensile test as the flexural strength and impact, the composite with 30 % fiber caroa showed higher tensile strength. The results show that the tensile and flexural strength of the composite decreased with time of thermal exposure. The thermal aging at 110 °C caused a decrease in tensile properties of the composites.     

Copper functionalization of polypropylene fabric surface in order to use in fog collectors

Polypropylene fabrics were coated with copper particles using electroless plating, screen printing and wire arc spray coating techniques. Surface morphology of the fabrics was studied using optical and scanning electron microscopes (SEM). Furthermore, tensile strength, electrical conductivity, thermal conductivity, air permeability, water contact angle and fog collection efficiency of the coated fabrics were measured and the obtained results were analyzed. SEM micrographs showed that a very thin and uniform layer of copper deposited on the surface of the electroless plated polypropylene fibers. In the printed or spray coated fabrics the copper particles filled the spaces between yarns and fibers. The polypropylene electroless copper plated fabrics showed higher tensile strength, electrical conductivity, air permeability and thermal conductivity when compared with the fabrics coated with copper screen printed and copper spray coated fabrics. Finally, the obtained results showed that copper electroless plating could increase the fog collection efficiency of polypropylene fabrics considerably. As a conclusion, the surface modified copper electroless polypropylene fabrics are good candidates for fog collection in appropriate regions which need further investigations.     

Tools for knowledge acquisition within the NeuroScholar system and their application to anatomical tract-tracing data

Background

Knowledge bases that summarize the published literature provide useful online references for specific areas of systems-level biology that are not otherwise supported by large-scale databases. In the field of neuroanatomy, groups of small focused teams have constructed medium size knowledge bases to summarize the literature describing tract-tracing experiments in several species. Despite years of collation and curation, these databases only provide partial coverage of the available published literature. Given that the scientists reading these papers must all generate the interpretations that would normally be entered into such a system, we attempt here to provide general-purpose annotation tools to make it easy for members of the community to contribute to the task of data collation.

Results

In this paper, we describe an open-source, freely available knowledge management system called 'NeuroScholar' that allows straightforward structured markup of the PDF files according to a well-designed schema to capture the essential details of this class of experiment. Although, the example worked through in this paper is quite specific to neuroanatomical connectivity, the design is freely extensible and could conceivably be used to construct local knowledge bases for other experiment types. Knowledge representations of the experiment are also directly linked to the contributing textual fragments from the original research article. Through the use of this system, not only could members of the community contribute to the collation task, but input data can be gathered for automated approaches to permit knowledge acquisition through the use of Natural Language Processing (NLP).

Conclusion

We present a functional, working tool to permit users to populate knowledge bases for neuroanatomical connectivity data from the literature through the use of structured questionnaires. This system is open-source, fully functional and available for download from [1].

     

Collaboration and distances between German immunological institutes – a trend analysis

Background

The hypothesis that distance matters but that in recent years geographical proximity has become less important for research collaboration was tested. We have chosen a sample–authors at German immunological institutes–that is relatively homogeneous with regard to research field, language and culture, which beside distance are other possible factors influencing the willingness to co-operate. We analyse yearly distributions of co-authorship links between institutes and compare them with the yearly distributions of distances of all institutes producing papers in journals indexed in the Science Citation Index, editions 1992 till 2002. We weight both types of distributions properly with paper numbers.

Results

One interesting result is that place matters but if a researcher has to leave the home town to find a collaborator distance does not matter any longer. This result holds for all years considered, but is statistically most significant in 2002. The tendency to leave the own town for collaborators has slightly increased in the sample. In addition, yearly productivity distributions of institutes have been found to be lognormal.

Conclusion

The Internet did not change much the collaboration patterns between German immunological institutes.

     

Effects of silver content and morphology on the catalytic activity of silver-grafted titanium oxide nanostructure

As titanium oxide is a well-known photocatalyst, we investigated the effects of silver content and nanostructural morphology on the photocatalytic degradation of two dyes, methylene blue and rhodamine B. Two nano-formulations were utilized, including nanofibers and nanoparticles. Silver-grafted titanium oxide nanofibers were synthesized using the electrospinning of silver nitrate/titanium isopropoxide/poly(vinyl acetate) sol-gel. The nanoparticulate form was obtained by calcination of a ground powder prepared from the same electrospun sol-gel. The results affirmed the advantage of the silver-grafted titanium oxide nanostructures over the silver-free ones. Increasing the silver content in the nanofibers led to increases in their surface area, which is an important parameter in heterogeneous catalytic chemical reactions. Therefore, the results strongly suggest the use of silver-grafted titanium oxide in a nanofibrous form. These results further support utilizing Agloaded titanium oxide nanofibers as a photocatalyst.