Lignin-degrading activity of edible mushroom <Emphasis Type="Italic">Strobilurus ohshimae</Emphasis> that forms fruiting bodies on buried sugi (<Emphasis Type="Italic">Cryptomeria japonica</Emphasis>) twigs

Strobilurus ohshimae is an edible mushroom, and it specifically forms its fruiting bodies on buried sugi (Cryptomeria japonica) twigs. In this research, we studied lignindegrading activity of S. ohshimae. We isolated 18 strains of S. ohshimae from various regions of Japan, and determined their lignin degradation rates on sugi wood meal medium. All the strains of S. ohshimae degraded approximately 6%–12% of sugi lignin in 30 days, and these lignin degradation rates were 1.5–3 times higher than those of Trametes versicolor, which is a typical lignin-degrading fungus. Among the three main lignin-degrading enzymes, activity of lignin peroxidase and manganese peroxidase was not observed, while 4340U/g of laccase was produced in 30 days. To investigate the effect of wood species on lignin degradation by S. ohshimae, the lignin degradation rate and laccase productivity on sugi wood meal medium were compared with those on beech (Fagus crenata). In T. versicolor, both lignin degradation rate and laccase productivity were higher on beech than on sugi. Conversely, in S. ohshimae, lignin degradation rate and laccase productivity were higher on sugi than on beech. Therefore, it was suggested that coniferous lignin is not always difficult to degrade for the fungi that inhabit softwood. Part of this article presented at the 54th Annual Meeting of the Japan Wood Research Society, Sapporo, August 2004     

The flammability of shrubs and trees in anAcacia mangium plantation based on silica-free ash content

Preliminary research to understand the flammability of 14 species of shrubs and 8 species of trees based on silica-free ash content was done in order to recognize which shrubs or trees are more flammable. The results show that the silica-free ash content of shrubs and trees leaves was greater than the stems ranging between 1.7% and 11.4% for leaf and 0.4% and 7.8% for the stems. The shrubsDicranopteris linearis, Imperata cylindrica, Eupatorium pubescens, Lantana camara, Eugenia sp.,Cliforia laurifolia, Pterospermum sp.,Hibiscus similis, Clidemia hirta andTrema orientalis must be considered when fire invades the plantation as well as the treeParaserianthes falcataria, Eucalyptus urophylla, Calliandra callothyrsus, andPeronema canescens.     

Strength properties of glued laminated timber made from edge-glued laminae II: bending,tensile, and compressive strength of glued laminated timber

The purpose of this study was to investigate the strength properties of glued laminated timber composed of edge-glued laminae and to investigate the influence of edge gluing on the strength properties. Glued laminated timber composed of multiple-grade laminae (symmetrical composition, strength grade E95-F270, 10 laminations) was produced from karamatsu (Larix kaempferi) edge-glued laminae according to the Japanese Agricultural Standard. The bending, tensile, and compressive strengths of the glued laminated timber were measured. The average bending, tensile, and compressive strengths were 33.4, 24.5, and 35.9 MPa, respectively, and these values are almost equal to those of glued laminated timber composed of karamatsu single-piece laminae. It was determined that finger-joints and knots in the edge-glued laminae played a significant role in the failure of specimens. However, the use of glued edge-joints did not appear to affect the failure of specimens.     

Genetic diversity of Pinus densiflora pollen flowing over fragmented populations during a mating season

We attempted to evaluate the genetic diversity of long-distance transported pollen flowing over fragmented Pinus densiflora populations during a mating season. A P.?densiflora clonal seed orchard, which was located in a rural area where many fragmented populations exist, was selected for pollen capture. Immigrant pollen captured by three clones having different flowering times was regarded as the pollen flowing over fragmented populations during a mating season. The genetic diversity (H _e) values of the immigrant pollen captured by the three clones were high (H _e?>?0.894). The correlation of paternity (r _p) values of the seeds having immigrant parent generated from the three clones were calculated to be negative. From these parameters, the pollen cloud is considered to have maintained high genetic diversity during the mating season. The genetic composition of the pollen cloud showed slight variation. The pollen captured by different trees (i.e., clonal ramets of the three clones) was significantly different based on analysis of molecular variance. Especially, the pollen pools captured by trees planted in the western side of the orchard were significantly different from the gene pool of the surrounding populations. Factors affecting this differentiation could be that the donors of the pollen transported to the orchard vary with time, as well as nonuniform dispersal of the pollen. From these results, the pollen flowing over fragmented P.?densiflora populations is considered to have high genetic diversity, compensating to some extent for fragmentation.     

Cell wall thickness and tangential Young's modulus in coniferous early wood

To investigate the effect of wall thickening around cell corners on the tangential Young's modulus of coniferous early wood, tapered beam cell models in which the variation of the cell wall thickness in the axial direction was taken into account were constructed for seven species. Their tangential Young's moduli were compared with the experimental results. The calculated Young's moduli of tapered beam cell models were larger than those of the models composed of the cell walls with uniform thickness, although both models showed almost the same density. For some species the calculated Young's moduli of the models in which the cell wall thickness increased curvilinearly in the axial direction were much closer to the experimental values. The reduction of the radial cell wall deflection due to the increase of the stiffness around cell corners was considered to increase the tangential Young's modulus of a wood cell.This report was presented at the 49th annual meeting of the Japan Wood Research Society, Tokyo, April 1999     

Probabilistic evaluation of the final moisture content of kiln-dried lumber using the bootstrap method

This paper presents a probabilistic method of evaluating the final moisture content (MC) of lumber obtained at the end of the kiln-drying process. The final MC data of three different drying tests conducted in past studies were analyzed using the bootstrap method. Target MC was tentatively set below 20 % in the analysis. Two characteristic parameters representing the final MC were estimated with bootstrap confidence intervals. These parameters were the standard deviation (SD) and the percentage of the population that met the MC requirement of less than 20 % (P ₂₀). The histograms of the final MC and the subsequent goodness-of-fit tests revealed that the final MC data of two drying tests did not follow any classical probability distributions, including Normal, Log-Normal, Weibull, and Gamma distributions, thus indicating the need for nonparametric statistics. The uncertainty of the final MC could be evaluated with the estimated SD and P ₂₀. After deriving the relationships between P ₂₀ and the corresponding probability that P ₂₀ is not achieved, we demonstrated how such relationships could provide a kiln operator with information to facilitate better decision-making in optimizing a drying schedule.     

Chemical changes in steam-pressed kenaf core binderless particleboard

The effects of chemical changes in kenaf core binderless particleboards on the bonding performance and thickness swelling of boards were investigated by chemical and spectroscopic analyses. Mild steam-injection treatments (0.6–1.0MPa) caused significant degradation of hemicelluloses, lignin, and cellulose. Conventional hot pressing caused a lower degree of degradation of the chemical components. The hot-pressed kenaf core board without any binders showed poor bonding performance. Thus, it was found that partial degradation of the three major chemical components of the kenaf core by mild steam-injection treatment increased the bonding performance and dimensional stability of the binderless boards, and gave better quality binderless boards than those made by hot-pressing treatments.Part of this report was presented at the 4th International Wood Science Symposium, Serpong, Indonesia, September 2002; and at the 53rd Annual Meeting of The Japan Wood Research Society, Fukuoka, March 2003     

Breaking the crossability barriers between disomic tetraploid Solanum acaule and tetrasomic tetraploid S. tuberosum

Summary A combination of compatible second pollinations and embryo rescue was applied for systematic production of true tetraploid hybrids from crosses between disomic tetraploid Solanum acaule and tetrasomic tetraploid potato, S. tuberosum. Several genotypes of tetraploid potatoes were pollinated with S. acaule, and the compatible second pollinations were made on the following day, with a genotype of S. phureja, IvP 35 to promote fruit development. Embryo rescue was carried out in 21 families, 14 to 27 days after the first pollination. A total of eight plants were obtained from the embryo rescue and their chromosome numbers were counted in the root tips. Three of the eight plants were identified as tetraploid, and five others as diploid. Morphology, isozyme banding patterns, and pollen stainability, as well as potato spindle tuber viroid (PSTVd) resistance, indicated the hybrid nature of the three plants. This is the first report of successful tetraploid hybrid production between disomic tetraploid S. acaule (4x) and tetrasomic tetraploid potatoes. Seed set from the crosses between one of hybrids and diploid potatoes indicated workable levels of both male and female fertility for introgression of valuable genes from S. acaule into the cultivated potato gene pool. The methodology used may be applied to other disomic tetraploid tuber-bearing Solanum species and with some modifications also to distantly related solanaceous species and genera.     

Refinement of rooting depths using satellite-based evapotranspiration seasonality for ecosystem modeling in California

Accurate determination of rooting depths in terrestrial biosphere models is important for simulating terrestrial water and carbon cycles. In this study, we developed a method for optimizing rooting depth using satellite-based evapotranspiration (ET) seasonality and an ecosystem model by minimizing the differences between satellite-based and simulated ET. We then analyzed the impacts of rooting depth optimization on the simulated ET and gross primary production (GPP) seasonality in California, USA. First, we conducted a point-based evaluation of the methods against flux observations in California and tested the sensitivities of the simulated ET seasonality to the rooting depth settings. We then extended it spatially by estimating spatial patterns of rooting depth and analyzing the sensitivities of the simulated ET and GPP seasonalities to the rooting depth settings. We found large differences in the optimized and soil survey (STATSGO)-based rooting depths over the northern forest regions. In these regions, the deep rooting depths (>3 m) estimated in the study successfully reproduced the satellite-based ET seasonality, which peaks in summer, whereas the STATSGO-based rooting depth (<1.5 m) failed to sustain a high ET in summer. The rooting depth refinement also has large effects on simulated GPP; the annual GPP in these regions is increased by 50–100% due to sufficient soil water during the summer. In the grassy and shrubby regions of central and southern California, the estimated rooting depths are similar to those of STATSGO, probably due to the shallow rooting depth in these ecosystems. Our analysis suggests that setting a rooting depth is important for terrestrial ecosystem modeling and that satellite-based data could help both to estimate the spatial variability of rooting depths and to improve water and carbon cycle modeling.