免耕播种机试验与应用研究

主要论述了保护性耕作关键装备—2BM-9型免耕播种机的技术参数与工作原理,论述了其性能试验、可靠性试验及应用效果。通过性能试验与生产考核表明:该机各项指标均达到了设计要求,使用可靠性大于98%,调整使用方便性大于97%。经测试与调查统计知:该机对作物留茬地提高土壤含水率6%～9%,减少农田风蚀50%～80%,提高土壤有机质含量0.04%～0.08%,增加农民收入10%～15%。经过4年的推广应用,取得了良好的经济社会生态效益,对促进保护性耕作技术的实施有着重要的作用。     

蒙古口蘑担孢子萌发及初生菌丝生物学特性研究

以蒙古口蘑(Tricholoma mongolicum)为试材,采用光学显微镜观察担孢子及菌丝体形态的方法,研究了不同培养基对蒙古口蘑担孢子萌发及初生菌丝生长情况的影响。结果表明:蒙古口蘑担孢子呈肾形或椭圆形,大小约为(4~6)μm×(6~9)μm;担孢子在培养基上萌发出肉眼可见的微小菌落至少需要1周的时间;MS培养基中添加1.5g·L~(-1)酵母粉和1.5g·L~(-1)酸水解酪蛋白,对担孢子萌发有明显的促进作用;根据初生菌丝菌落生长速度和菌落形态等有关特征,发现有5种明显不同类型的初生菌丝,分别为菌丝绒毛型、菌丝贴生型、菌丝稀薄型、成簇生长型、缓慢生长型。另外,采用rDNA-ITS方法、PCR产物测序及NCBI-Blast比对,证明试验材料为蒙古口蘑。该试验提供了一种食用菌菌丝体直接PCR的方法,为进行有关食用菌DNA分子方面研究提供了便利;该研究结果可为蒙古口蘑担孢子交配型研究提供依据,为珍稀食用菌研究积累资料。     

物性分析仪测定鸭梨质构条件的优化

以鸭梨果实为试材,采用物性分析仪TPA模式在不同压缩速度和目标形变量下,测定鸭梨果实的质地参数,以优化TPA模式评价的测定条件。结果表明:在TPA测定过程中,目标形变量对硬度、内聚性、弹性、粘附性、胶着性、恢复性、断裂性和咀嚼性等8个TPA参数的影响极显著(P≤0.01);而压缩速度对硬度和胶着性性影响显著(P≤0.05),对断裂性极显著(P≤0.01),对其它5个TPA参数影响不显著。选用1.0mm·s-1的压缩速度和20%的目标形变量作为鸭梨果实TPA模式下的测定条件,能够客观地反映鸭梨果肉组织的质地特征。     

黑皮冬瓜嫁接砧木的筛选与鉴定

挑选南瓜砧、蒲瓜砧和葫芦砧共10个品种,以佛山市三水黑皮冬瓜为接穗,采用斜顶插接法嫁接,露地栽培管理,比较其产量和农艺性状。试验结果表明,DZ-01冬瓜砧、京欣砧三号和强势作为三水黑皮冬瓜的嫁接砧木,可有效降低枯萎病发病率,增产10%以上,商品性状得到明显改善,商品品质差异不显著,推广应用性强。     

不同基因型大麦苗期对干旱胁迫的响应及HvPIPs基因表达特征分析

为研究不同基因型大麦苗期对干旱胁迫的响应,挖掘优质抗旱的大麦种质资源,以4份不同基因型大麦(2个高抗品种ZDM5430和ZDM5458,2个干旱敏感型品种7DCADA和IL-12)为材料,利用聚乙二醇(PEG-6000)模拟干旱条件,综合分析不同品种大麦的苗期抗旱性差异;并通过对不同品种根系进行PIPs实时定量分析,研究水通道蛋白AQPs基因与干旱胁迫之间的应答关系。结果表明,持续干旱胁迫会使大麦生长变缓,各处理苗长、根长、叶含水量和根含水量都呈下降趋势,其中,4个品种的大麦叶含水量在干旱胁迫14 d时下降最为显著,与对照相比,其降幅分别为29.14%、52.64%、21.67%和72.15%。干旱胁迫对大麦苗期干物质积累量和根冠比的影响较小,各处理间差异不显著;但持续干旱后,抗旱品种ZDM5430的根冠比呈上升趋势,在胁迫7、14、21 d时较CK分别增加了4.92%、42.86%和21.05%。随着胁迫时间的延长,大麦旗叶叶绿素含量和根系活力也呈下降趋势,其中ZDM5430和ZDM5458较对照组降幅较小,说明抗旱品种的形态指标、叶绿素含量及根系活力受干旱胁迫的影响较小。通过PIP...     

A Comparative Study of Confined Concrete Models under Cyclic Loading

In this paper,four models are selected as the representatives and applied to nonlinear dynamic analysis program for space frames which is based on the beam-column elements using the finite element flexibility method and the fiber model.Park's test on combined axial and bending columns under cyclic loading are taken as the calibrations,comparisons to material and structural member level are drawn and the analytical results of various models are discussed.     

Dynamic Modeling and Simulation of 440 t/h Steam-cooled Cyclone Separator for CFB Boiler

A dynamic mathematical model of the steam-cooled cyclone separator in a 440 t/h CFB boiler has been established.Based on the mathematical model,simulation model of the cyclone separator is created with the advanced continuous simulation language(ACSL).The validity of this model has been verified by the simulation experiments and analysis.This model can provide a theoretical guidance for operation and optimal design of the cyclone separator.     

The Application of Pre-splitting Blasting to Excavation on High Slope in Soft Rock Section

Based on analyzing about blasting mode of slope in the construction of road, the paper shows that pre splitting blasting is mostly suitable in the section of severely weathering soft rock with developed joints and fractures, introduced the laying out about the hole of pre splitting blasting that can apply in the high slope of the expressway in the section, and designed the parameter. The practice shows that it gained favourable effect by this method.     

A Research on the Way of EMBET in the Tracking Systems'' Accuracy-analysis During Satellite Launch

In the past, the criterion for calibration has almost invariably been the stellar oriented ballistic camera,the method is a point to point comparison on the identical coordinate system. Deficiencies is follows: The request of weather is severe(cloudless night); The period is often long; the measure equipment of high precision can't be calibrated. While EMBET methods is used in calibration, it does not need criterion and it demands only that the measure elements is larger than 3,and the trajectory and many system errors of the measure elements can be simultaneously calculated with the measure data sequences. The error models of related equipments' measure elements and the EMBET of typical equipment group are given. The EMBET method is successfully used in Accuracy-analysis of Satellite Launch.     

Stability Ishikawa Iteration Procdeure for Strongly Pseudocontractive Operator and Strongly Accretive Operator Equations

By virtue of some analysis techniques,it is proved that certain ishikawa iteration procdeure with errors are stable with respect to strongly pseudocontractive operators in real Banach space. A related result deals with stable iteration procedures for solution of the nonlinear equation of strongly accretive operators. The results presented extend and improve the corresponding by Osilike,Zeng, Chidume, Deng, Liu,et al.